Fiber Optic Cable Tight Buffered Products SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC’s tight buffered products provide factory standard guaranteed performance specifications. They are 100% optically tested and are offered with a variety of optical performance levels. Features: • Extremely light weight • Extremely small outer diameter • Easily terminate to industry standard connectors • Wide variety of materials to suit your specific requirements • Unique micro-centering technology results in a highly consistent, easy-to-strip tight buffer Applications: • Patch cords and pigtails • Small conduit • LASER modules for telephony applications 10/05 • 101466 Ruggedized BReakout Cables Fiber Optic Cable Tight Buffered Products 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Specifications Mechanical Characteristics: Test Procedure Units Results Crush Resistance EIA-FOTP-41A N/cm 1200 Impact Resistance EIA-FOTP-25B # of impacts 500 Flexing (# of Cycles) EIA-FOTP-104A # of cycles 10,000 Maximum Pulling Load EIA-FOTP-33A N (lb) 2000 (112) Maximum Operating Load EIA-FOTP-33A N (lb) 1000 (67) Min. Bend Radius @ Max Load EIA-FOTP-33A — 15 x Cable OD Low Temperature Bend Test EIA-FOTP-37A C (F) Passed @ -40 (-40) Simplex Fiber Cable 650 or 900 µm Outer Jacket 245 or 500 µm Acrylate Coated Fiber Environmental Characteristics for PVC : Storage Temperature -40˚ to 70 ˚C (-40˚ to 158 ˚F) Operating Temperature -20˚ to 70 ˚C (-4˚ to 158 ˚F) Installation Temperature 0˚ to 70 ˚C (32˚ to 158 ˚F) Environmental Characteristics for Polyester : Storage Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F) Operating Temperature -20˚ to 70 ˚C (-4˚ to 158 ˚F) Installation Temperature 0˚ to 70 ˚C (32˚ to 158 ˚F) Environmental Characteristics for PVDF : Storage Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F) Operating Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F) Installation Temperature 0˚ to 70 ˚C (32˚ to 158 ˚F) 10/05 • 101466 Ruggedized BReakout Cables Fiber Optic Cable Tight Buffered Products 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Construction Characteristics: Available Materials • Flame Retardant PVC • Polyester • PVDF • ETFE • Nylon • Low Smoke Zero Halogen Optical Performance: Multimode Fiber Maximum Attenuation @ 850/1300 nm Typical Attenuation @ 850/1300 nm Minimum Bandwidth @ 850/1300 nm Core Diameter (µm) Clad Diameter (µm) Coat Diameter (µm) Numerical Aperture 50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015 62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015 100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020 200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020 Singlemode Fiber @ 1310/1550 nm @ 1310/1550 nm Mode Field Diameter (µm) @ 1310 nm @ 1550 nm 1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 101466 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET *Replace XXX or YYY with Fiber Type below: XXX = Fiber Type 050 = 50/125/500 µm Multimode 100 = 100/140/500 µm Multimode 200 = 200/230/500 µm Multimode YYY = Fiber Type 010 = Singlemode 062 = 62.5/125/245 µm Multimode 62E = 62.5/125/245 µm Enhanced Multimode 050 = 50/125/245 µm Multimode 50E = 50/125/245 µm Enhanced Multimode 50U = 50/125/245 µm Ultra Multimode for 300 m 10 Gbps 5U5 = 50/125/245 µm Ultra Multimode for 550 m 10 Gbps Ordering Information Description Tight Buffer Diameter (µm) Fiber Coating Diameter (µm) Catalog Number* Polyester Outer Jacket 900 500 0001HYTTBF XXX Polyester Outer Jacket 900 245 7001HYTTBF YYY Polyester Outer Jacket 650 245 3001LFPTBF YYY PVC Outer Jacket 900 245 6001LFPTBF YYY Nylon Outer Jacket 900 245 5001ZYTTBF YYY PVDF Outer Jacket 900 245 9001SOLTBF YYY Low Smoke Zero Halogen Outer Jacket 900 245 A001LZHTBF YYY Modified ETFE Outer Jacket 900 245 0001TEFTBF YYY . Fiber Optic Cable Tight Buffered Products SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC’s tight buffered products provide. ˚C (32˚ to 158 ˚F) 10/05 • 101466 Ruggedized BReakout Cables Fiber Optic Cable Tight Buffered Products 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891