Tài liệu Fiber Management Tray Introduction pdf

10/03 • 100571 600 mm Products 63 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray Introduction ADC’s fiber management trays provide a flexible, economical approach to handling your network’s most vital elements by offering four different designs. Termination, termination/splicing, termination/storage, and slack storage designs are offered with ADC’s modular, all-front access trays. Features All-Front Access Design Sliding radius limiters provide ultimate fiber management by addressing one of the most critical elements of fiber cable management: bend radius protection. As fibers leave the tray, a specially designed bell-shaped exit point provides maximum edge protection. By controlling the movement of fibers within the tray, error-proof slack loop management is maintained, ensuring 30 mm bend radius protection within the tray. This is crucial in ensuring no fiber breaks, which cause service failures and increase network operations costs. Sliding adapter packs allow easy access for connecting jumpers and cleaning connectors, ensuring that any fiber can be installed or removed without inducing a macrobend on an adjacent fiber. That can mean the difference between a network reconfiguration time of 20 minutes per fiber and one of over 90 minutes per fiber. These trays are lockable, further ensuring the integrity of the fibers by greatly reducing the chance for accidents. Modular Design The value of a single interface for performing multiple tasks in your network cannot be denied. By employing a one-rack-unit modular tray, network technicians have ready access to terminating, splicing, and storing fiber. This one-stop management approach means time saved and value added. 10/03 • 100571 600 mm Products 64 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 24-Termination Only 32-Termination Only Fiber Management Tray 1 Rack Unit – Termination Only Catalog Number FMT-D __ __ 0 __ 0 __ 0 __ - __ __ __ __ Drawer Configuration Connector/Adapter Style Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 24 32 Mounting Style 1 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Number of Ports Faceplate Color P Putty Adapters Loaded A Adapters loaded 0 No adapters 1 All 19" mounting brackets are reversible and can mount in EIA or WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. The termination-only fiber management tray provides termination for 24 or 32 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. RT Termination only Multimode 5ST ® 9SC Singlemode 1 FC hybrid (FC connector on front; SC connector on back of bulkhead) 2 FC ultra polish 3ST ® hybrid (ST ® connector on front; SC connector on back of bulkhead) 4ST ® ultra polish 7 SC ultra polish F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia adapter M MTRJ feedthrough adapter N SC with zirconia adapter PST ® with zirconia adapter 10/03 • 100571 600 mm Products 65 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Termination and Splice 12-Termination/Splice (right splice entry) 24-Termination/Splice (right splice entry) 24-Termination/Splice (right splice entry) 24-Termination/Splice (left splice entry) Catalog Number FMT - D __ __ 0 __ 0 __ __ __ - __ __ __ __ Configuration TL Term splice with splice tray (left splice entry) TR Term splice with splice tray (right splice entry) Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Mounting Style 1 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Number of Ports 12 16 24 Cable or Adapter Type A Adapters only 0 No adapters C Multimode pigtails (50/125) K Multimode pigtails (62.5/125) U Singlemode Maxi-Strip pigtails R Singlemode ribbon pigtails Chip Style (mini splice tray) 0N/A 2 Heat shrink 3 Mechanical Faceplate Color P Putty Connector/Adapter Style Multimode 5ST ® 9SC Singlemode 1 FC hybrid (FC connector on front; SC connector on back of bulkhead) 2 FC ultra polish 3ST ® hybrid (ST ® connector on front; SC connector on back of bulkhead) 4ST ® ultra polish 7 SC ultra polish F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia adapter N SC with zirconia adapter PST ® with zirconia adapter 1 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. The termination and splice tray terminates and splices 12, 16, or 24 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. Panels loaded with pigtails come with color-coded 900 micron pigtails. 10/03 • 100571 600 mm Products 66 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Termination and Storage 12-Termination/Storage (universal storage) 16-Termination/Storage (universal storage) 24-Termination/Storage (left storage) 24-Termination/Storage (right storage) Catalog Number FMT-D __ __ 0 __ 0 __ 0 __ - __ __ __ __ Configuration SL Termination/storage (left storage) SR Termination/storage (right storage) ST Termination/storage (universal storage) Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Mounting Style 1 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Number of Ports 12 Available with ST configuration only 16 Available with ST configuration only 24 Available with SR and SL configurations only Faceplate Color P Putty Adapters Loaded A Adapters loaded 0 No adapters Connector/Adapter Style Multimode 5ST ® 9SC Singlemode 1 FC hybrid (FC connector on front; SC connector on back of bulkhead) 2 FC ultra polish 3ST ® hybrid (ST ® connector on front; SC connector on back of bulkhead) 4ST ® ultra polish 7 SC ultra polish F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia adapter M MTRJ feedthrough adapters N SC with zirconia adapter PST ® with zirconia adapter 1 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. The termination and storage tray terminates and stores 12, 16, or 24 fibers in an all-front-access design. This tray mounts in 19-inch, 23-inch, or ETSI racks, while sliding radius limiters provide cable management for incoming and outgoing fibers. 10/03 • 100571 600 mm Products 67 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Slack Storage Panels Catalog Number FMT - D __ __ 0 0 0 00 __ - __ 00 __ Drawer Configuration BS Bulk storage DS Discrete storage Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Mounting Style 1 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Faceplate Color P Putty Bulk/Storage Drawer Discrete/Storage Drawer Capacity Slack storage type 3 mm cable 2 mm cable 1.7 mm cable Bulk 32 cables, 2.5 m each 48 cables, 2.5 m each 60 cables, 4 m each Discrete 16 cables 1.7 m each 16 cables, 2 m each 16 cables 2.5 m each 1 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. The slack storage tray offer bulk storage for up to 60 fibers, and discrete slack storage for up to 16 fibers. This all-front-access tray mounts in 19-inch, 23-inch, or ETSI racks. Sliding radius limiters provide cable management for incoming and outgoing fibers. 10/03 • 100571 600 mm Products 68 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Splicing Only Splicing Only Fiber Management Tray 1 Rack Unit – Splicing Only Catalog Number FMT - DAS0000 __ __ - __ __ __ __ Mounting Style 1 A 19"/5" recess C 19"/2.2" mm recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Faceplate Color P Putty Number of Splices/Capacity 12 1 tray 24 2 trays Splice Type 0 None 2 Heat shrink 3 Mechanical Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 1 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. 10/03 • 100571 600 mm Products 69 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Termination and Splice Fixed Bulkhead This configuration features fixed bulkhead style adapter plates and accommodates singlemode SC (ultra polish and angled), E-2000, LC and LX.5 ® , as well as multimode SC, LC, and LX.5 adapters. The tray can be ordered with adapters only, or with pigtails. Catalog Number FMT-D __ __ 0 __ 0 __ __ __ - __ __ __ __ Configuration TW Termination/splice with bulkhead plate (right splice entry) TX Termination/splice with bulkhead plate (left splice entry) Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Mounting Style 3 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 4 F ETSI/40 mm recess 4 Faceplate Color P Putty Splice Type 0 None 2 Heat shrink 3 Mechanical Connector/Adapter Style Multimode 9SC YLX.5 ® 6LC Singlemode 7 SC ultra polish J SC angled polish K E-2000 angled polish 8LC XLX.5 ® Adapters Loaded 1 OR A Adapters only 0 No adapters Pigtail Type 2 U Singlemode Maxi-Strip pigtails K Multimode pigtails (62.5/125) C Multimode pigtails (50/125) Number of Ports with Adapters 1 OR 01 24 Adapters only Number of Pigtails 2 08 8 pigtails 12 12 pigtails 16 16 pigtails 24 24 pigtails 1 When ordering FMTs with adapters only, enter number of adapters (00 to 24). 2 FMTs can be ordered with 8, 12, 16 and 24 pigtails only. 3 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 4 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. Termination/Splice Fixed Bulkhead (right splice entry) Termination/Splice Fixed Bulkhead (right splice entry) 10/03 • 100571 600 mm Products 70 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Termination and Storage Fixed Bulkhead Catalog Number FMT-D __ __ 0 __ 0 __ 0 __ - __ __ __ __ Configuration SG Termination/storage with bulkhead plate (right storage entry) SF Termination/storage with bulkhead plate (left storage entry) Lock Type 0 No lock 1 Lock, key type 1 2 Lock, key type 2 Mounting Style 1 A 19"/5" recess C 19"/2.2" recess E 19"/40 mm recess 2 F ETSI/40 mm recess 2 Faceplate Color P Putty Connector/Adapter Style Multimode 9SC YLX.5 ® 6LC Singlemode 7 SC ultra polish J SC angled polish K E-2000 angled polish 8LC XLX.5 ® Adapters Loaded A Adapters only 0 No adapters Number of Ports with Adapters 01 24 1 All 19" mounting brackets are reversible and can mount in EIA and WECO racks. 2 40 mm recess FMTs are equipped with a special trumpet sliding radius limiter. Other mounting styles cannot be used in 40 mm recess applications. Termination/Storage Fixed Bulkhead (right storage) Termination/Storage Fixed Bulkhead (right storage) This configuration features fixed bulkhead style adapter plates and accommodates singlemode SC (ultra polish and angled), E-2000, LC and LX.5 ® , as well as multimode SC, LC, and LX.5 adapters. When ordered with 24 LC or LX.5 ® adapters, this FMT supports 48 fibers. 10/03 • 100571 600 mm Products 71 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Accessories Sliding Adapter Packs Description Multimode ST ® SC Singlemode FC hybrid (FC connector on front; SC connector on back of bulkhead) FC ultra polish ST ® hybrid (ST ® connector on front; SC connector on back of bulkhead) ST ® ultra polish SC ultra polish FC angled polish SC angled polish E-2000 angled polish FC with zirconia adapter SC with zirconia adapter ST ® with zirconia adapter Catalog Number FMT-2SAP05 FMT-2SAP09 FMT-2SAP01 FMT-2SAP02 FMT-2SAP03 FMT-2SAP04 FMT-2SAP07 FMT-2SAP0F FMT-2SAP0J FMT-2SAP0K FMT-2SAP0L FMT-2SAP0N FMT-2SAP0P Ordering Information FMT-ACCCLMP01 0.25" Offset from Rack FMT-ACCCLMP02 1.25" Offset from Rack Rack Cable Cable Cable Clamp Kit 1.0" (2.54 cm) 19.5" (49.53 cm) Wall FMT Panel Shown for Reference, Not Included in Kit Vertical Cable Guide Accessories Catalog Number FMT-ACCWLMT01 FMT-ACCCLMP01 FMT-ACCCLMP02 FMT-ACC01B FMT-ACC01P Description Wall mount kit Cable clamp kits .25" offset from frame 1.25" offset from frame Vertical cable guides Black Putty Ordering Information 10/03 • 100571 600 mm Products 72 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray 1 Rack Unit – Specifications PHYSICAL Approximate Weight: 8 to 10 lbs (3.7 to 4.5 kg) Configuration Options and Capacity: Termination only (24 or 32 fibers) Termination/storage (12, 16, or 24 terminations) Bulk Storage 3 mm outer diameter cable: 32 cables, length 2.5 m each 2 mm outer diameter cable: 48 cables, length 2.5 m each 1.7 mm outer diameter cable: 60 cables, length 4 m each Discrete storage 3 mm outer diameter cable: 16 cables, length 1.7 m each 2 mm outer diameter cable: 16 cables, length 2 m each 1.7 mm outer diameter cable: 16 cables, length 2.5 m each Termination/splicing (12, 16, or 24 splices) 1.7" (4.32 cm) 11.01" (27.97 cm) 17.26" (43.84 cm) Front View Shown without Sliding Radius Limiters A B C Ordering Code Configuration A B C C 19" EIA (2.2" recess) 18.32" (46.5 cm) 1.25" (3.2 cm) 2.25" (5.7 cm) E 19" EIA (40 mm recess) 18.32" (46.5 cm) 1.25" (3.2 cm) 1.54" (3.9 cm) A 19" EIA (5" recess) 18.32" (46.5 cm) 1.25" (3.2 cm) 5.0" (12.7 cm) F ETSI (40 mm recess) 20.28" (51.5 cm) 0.98" (2.5 cm) 1.54" (3.9 cm) Universal Mounting Bracket, EIA or WECO rack mount [...]... termination-only fiber management tray provides termination for 72 fibers in an all-front-access design This tray mounts in 19-inch, or ETSI racks Sliding radius limiters provide cable management for incoming and outgoing fibers www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 73 Fiber Management Tray 2 Rack Unit – Termination with IFC or Multifiber Cable 10/03 • 100571 600 mm Products The termination-only fiber management. .. angled polish www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 74 Fiber Management Tray 2 Rack Unit – Termination and Splice The termination and splice tray terminates and splices 48 fibers in an all-front-access design This tray mounts in 19-inch, or ETSI racks Sliding radius limiters provide cable management for incoming and outgoing fibers Panels loaded with pigtails come with color-coded 900 micron... Cable 10/03 • 100571 600 mm Products The termination-only fiber management tray provides termination for 72 fibers and can be ordered preterminated with IFC or multifiber cable This tray mounts in 19-inch, or ETSI racks Sliding radius limiters provide cable management for incoming and outgoing fibers 72-Termination with IFC or Multifiber Cable Catalog Number FMT-GN7 - A 7 2 Cable Type Multimode... Offset from Rack Vertical Cable Guide Cable Clamp Kit www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 76 Fiber Management Tray 2 Rack Unit – Micro Value-Added Module System MicroVAM Shown in Access Position FMT-G Series with MicroVAM Ordering Information Catalog Number Description 2 RU Fiber Management Tray (FMT-G Series) accommodates up to 12 MicroVAMs for monitoring optical signals FMT-GVM00000-A72P... type 1 Lock, key type 2 Chip Style (mini splice tray) 0 None 2 Heat shrink 3 Mechanical Cable or Adapter Type A Adapters only 0 No adapters C Multimode pigtails (50/125) K Multimode pigtails (62.5/125) U Singlemode Maxi-Strip pigtails 10/03 • 100571 600 mm Products 48-Termination/Splice www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 75 Fiber Management Tray 2 Rack Unit – Accessories Sliding Adapter.. .Fiber Management Tray 2 Rack Unit – Termination with Adapters Only Sliding Adapter Pack Shown in Access Position 72-Termination with Adapters Only Catalog Number FMT-GRT0 0 0 - A72 Connector/Adapter Style... MicroVAMs are used for testing and monitoring optical signals; technicians can access both directions of the signal without disrupting service www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 77 Fiber Management Tray 2 Rack Unit – Micro Value-Added Module System Monitor Module Ordering Information Catalog Number 10/03 • 100571 600 mm Products FMT-M 1 0 0 0 Input Connector/Adapter Singlemode . Products 63 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fiber Management Tray Introduction ADC’s fiber management trays provide a flexible, economical approach to. Multifiber Cable The termination-only fiber management tray provides termination for 72 fibers and can be ordered preterminated with IFC or multifiber