Tài liệu LoopStar® 800 SONET Access System docx

Customer Premises TDM Network DS1 DS3 SONET OC-3/12 Moble Switching Telephone Office SONET OC-3/12 LoopStar 80 0 Up to 84 DS1s Customer Premises SONET OC-3/12 LoopStar 80 0 Up to 84 DS1s Customer Premises SONET OC-3/12 Loo pStar 80 0 Up to 84 DS1s LoopStar 800 LoopStar ® 800 SONET Access System SONET M13 Multiplexer Applications The LoopStar 800 SONET Access System enables service providers to cost effectively deploy a fiber-based solution to address locations where copper-based M13 multiplexers are typically deployed. While providing an effective alternative to copper-based M13s, the LoopStar 800 can deliver other advanced services simultaneously from the same system. As a result, the LoopStar 800 provides increased network visibility through its SONET management features and supports other services without significantly increasing the per port cost over traditional M13 multiplexers. Overview ADC’s LoopStar 800 is designed to offer high-density DS1 services to one or more service provider customers. The LoopStar 800 efficiently multiplexes and transports DS1 services over SONET while providing the reliability and protection expected from traditional SONET networks. In terminal multiplexer applications, the LoopStar 800 can drop the full bandwidth of an OC-3 (84 DS1s) from a single shelf to a customer site. In ring applications, three LoopStar 800s can be used to provide one DS3’s bandwidth capacity to each customer location. The LS800’s service scalability and rack or wall-mountable options make it ideal for individual and/or multi-tenant business units. Operational Efficiency The LoopStar 800’s compact 2 RU design (3.5”x17”x12”) allows service providers to increase their bandwidth capacity per RU by 50 percent over traditional M13 multiplexers**. Using a 28- port DS1 card in three tributary interface slots allows a service provider to choose from multiple OC-3 or OC-12 network interface options (UPSR or 1+1 APS) while still dropping off up to 84 DS1s, all from a single LoopStar 800 system. With this configuration, a fourth tributary slot remains available. This slot can be used for a fourth DS1 card to provide complete electrical protection for DS1 traffic, or if the LoopStar 800 is equipped with OC-12 network interface cards, it can be used to provide 10/100/1000BT Ethernet or OC-3 access for additional revenue-generating opportunities. This capability goes beyond traditional M13 multiplexers to increase capacity while providing more service flexibility. With support for advanced Ethernet-over-SONET (EoS) features, the LoopStar 800 is fully capable of maximizing the bandwidth efficiency of an OC-3 or an OC-12 in mixed traffic (TDM+Ethernet) applications. APPLICATION NOTE www.adc . c om • +1-952-938 - 8 0 8 0 • 1-8 00-366-38 91 Connectivity and Cable Management The system also supports a wall mount option for special demark applications in customer locations. As part of the LoopStar 800’s unique architectural design in supporting multiple tributary interface options, different electrical interface board options are provided for physically interfacing DS1 and DS3 electrical signals. The interface board options include an 84 DS1 port panel, a 24 DS3 port panel, a 28 DS1 and 12 DS3 port combo panel, and a blank panel for all-Ethernet applications. DS1 cable interfacing is managed using standard 64-pin AMP connectors, and DS3 cable interfacing is managed using standard BNC connectors. Summary The LoopStar 800 system design combines the functions of multiple devices into a single common platform. When used to drop DS1 services to end-user customers, the LoopStar 800 includes the features of a SONET terminal, a digital cross-connect system, a DS1 performance monitoring and test system, and a M13 Multiplexer all in one. This combination of functions provides significant capital and operations cost savings for a service provider’s network. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 1327922 5/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. APPLICATION NOTE . Premises SONET OC-3/12 Loo pStar 80 0 Up to 84 DS1s LoopStar 800 LoopStar ® 800 SONET Access System SONET M13 Multiplexer Applications The LoopStar 800 SONET Access. customers, the LoopStar 800 includes the features of a SONET terminal, a digital cross-connect system, a DS1 performance monitoring and test system, and a M13