www.adc.com • +1-952-938-8080 • 1-800-366-3891 SPEC SHEET Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems ADC’s Digivance ® Street-Level Coverage Solution (SCS) helps wireless service providers improve capacity in areas where restrictive zoning requirements prohibit deployment of necessary network equipment. The SCS distributed antenna system (DAS) utilizes patented digital RF transport-over-fiber technology to distribute wireless service between existing cell sites and SCS remote antenna units. The small-form-factor, environmentally hardened, Remote Units offer multiple mounting options that easily blend into the existing environment. The maintenance-free remote enclosure makes the SCS ideal for improving capacity in hard-to- access and challenging environmental areas such as tunnels, subways, and urban canyons. Features: • Supports 800 cellular and 1900 PCS • 25 MHz continuous bandwidth per system • Single- or dual-system packaging • Virtually maintenance-free operation with an environmentally sealed unit • Industry’s highest available optical loss budget – 25 dB • Digital transport is virtually transparent to air modulation standards; e.g., iDEN ® , GSM, CDMA, W-CDMA, 1xEV-DO, and HSDPA • All-digital transport enables transition to optional capabilities such as free space optics, millimeter wave links and wavelength division multiplexing (xWDM) • Remote Unit features integrated WDM to minimize fiber connections • Remote Unit is a sealed NEMA 6/IP-67 rated enclosure • Remote Units mount vertically or horizontally - inside pole, pole wrap, wall- mount, strand-mount and sub-terrain vault • Remote alarm monitoring with SNMP support and status LED • Local alarm networking of multiple systems for monitoring and control • Ease of installation 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems Overview With increased popularity and reliance on wireless devices, subscribers expect to have service at any time, in any place. This requires service providers to increase capacity and coverage, which is typically done by adding new cell sites. However, with city centers becoming more congested and local government zoning regulations becoming more stringent, obtaining permits for new wireless cell sites is becoming increasingly more difficult. Extending service to these hard-to-reach areas often requires overcoming major challenges. The SCS is a cost-effective solution for extending or distributing capacity from base stations to other areas that require coverage. Application Digivance is the only all-digital DAS available today. By using patented technology, the SCS digitizes the entire designated RF band, digitally transports it over fiber, and reconstructs the signal at full bandwidth, regardless of modulation technology. Digital RF transport allows the signals to be replicated at full dynamic range, independent of the fiber length, which improves data throughput. As advanced, high data-rate broadband services become available, networks with ADC’s SCS technology will be ready. ADC’s digital RF transport technology accommodates enhancements such as free space optical laser links, millimeter wave links and xWDM capabilities. The xWDM option allows multiple transmit and receive paths over a single fiber cable, potentially reducing annual fiber lease costs. Free space optical laser links and millimeter wave solutions overcome fiber availability issues. The SCS offers all the benefits of digital technology in a maintenance-free, compact Remote Unit. Its versatility and small size allow service providers to quickly deploy networks in challenging service areas. Centralization of base station capacity can also be realized using the SCS. This allows service providers to further benefit by reducing capital expenditures and annual operating costs. Base station radio capacity may be simulcast to multiple remotes by using RF splitting and combining capabilities. The SCS is a cost effective way to solve coverage and capacity problems without assuming the capital expense and time it takes to deploy additional cell sites. System Description The SCS optically transports digitized RF signals to difficult coverage areas such as congested city center locations, tunnels, and canyons. One point-to-point RF transport link consists of a Host Unit and corresponding Remote Unit. The SCS Host Unit is typically rack-mounted at the base transceiver station (BTS) site or collocated with other Host Units at a centralized base station radio (BR) suite. The RF signal is transported digitally over fiber optic cable connecting the host to a SCS Remote Unit. The SCS Remote Unit is positioned at the area requiring coverage and interfaces with an antenna to distribute the RF signal. The distance between the SCS Host Unit and Remote Unit is typically limited only by time delay requirements of system modulation standards (iDEN ® , GSM, CDMA, W-CDMA, 1xEV-DO, and HSDPA, etc.), and can be as far as several kilometers. With the product’s 25 dB optical budget, the SCS can be deployed in the most challenging fiber plants. Dual-band Enclosure Dual-WDM 1310nm and 1550nm Host Unit 1900 MHz Host Unit 800 MHz RF interface panel EMS or SNMP RX TX Wireless Base Station Internal WDM One fiber per band RF Signals Coax Cable Internal diplexor to one RF output Optional external UPS/battery backup Antenna Antenna Standoff Dual-band enclosure with two frequency bands 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Host Unit The rack-mounted SCS Host Unit is typically located at a BTS or a facility housing a suite of BTSs. On the forward path, the Host Unit digitizes the designated RF band and digitally transports it over singlemode fiber to the SCS Remote Unit. On the reverse path, the Host Unit receives the digitized signal and converts it to RF. The Host Unit also collects alarm information from the Remote Unit. For system deployments, multiple links can be networked together at the same BTS site. Host Units can be daisy-chained together to allow monitoring and control of multiple links from a single-user interface. Remote alarm monitoring and control of the SCS can be managed from an off-site location or NOC. Using a standard PC with a standard physical layer protocol, communications can be delivered to the NOC. In addition to sending alarm notifications to the Digivance EMS through software, the SCS Host Unit also features front panel alarm reporting. LEDs on the front panel of the Host Unit will change color depending on the status of the unit. LED displays provide information regarding the following items: • Power • System mode (active/standby) • Indication of faulty unit • RF conditions Furthermore, alarm contact closures provide major and minor alarms. The Host Unit has two alarm contacts that either report system operation is seriously affected (major alarm) or system operation is degraded (minor alarm). The Host Unit operates on DC power. Remote Unit The small-form-factor SCS Remote Unit minimizes visual pollution and offers multiple mounting options that easily blends into the environment. Mounting options for the single- and dual-system remotes include inside pole-mount, pole-wrap, wall-mount, strand-mount and sub-terrain vault- mount capabilities. The Remote Units can be mounted in a vertical or horizontal position in less than five minutes, are sealed NEMA 6/IP-67 rated enclosures that can be deployed in the harshest environments. Fiber, antenna, and power input/ output connectors are all sealed for maximum protection. For installations in areas with significant solar load, ADC offers a solar shield shroud to protect the SCS. On the forward path, the Remote Unit receives the digitized signals from the Host Unit and converts the signal back into RF to be distributed via an externally mounted antenna. On the reverse path, the Remote Unit digitizes the designated RF band and digitally transports it over singlemode fiber to the Host Unit. In addition to sending alarm notifications to the EMS software, the SCS Remote Unit also features LED alarm reporting. An LED on the bottom of the Remote Unit will illuminate upon a fault condition. The LED will display information about the following: • System mode (active/standby) • Indication of faulty unit • RF conditions • Power amplifier fault • Antenna fault system (VSWR) Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Alarming and Management ADC's Digivance ® Element Management System (EMS) provides operational and maintenance capability for the SCS. The EMS consists of a personal computer (PC) using a Windows ® operating system, ADC furnished Java-based software package; an ASCII based RS-232 capable terminal, and RS-232 cables. The EMS can simultaneously monitor a network of SCS links by daisy-chaining the alarm interfaces of up to 24 SCS Host Units. Each of the Host Units are connected through a controller area network bus and the PC can be connected to any of the Host Units. The EMS has the ability to download software, change parameters, and monitor alarms. The EMS provides three levels of alarms: software reporting, LEDs and external contacts. Using a laptop PC, the EMS can also be used for field test and troubleshooting at each SCS Remote Unit. Additionally, off-site functionality is accomplished through a terminal at the NOC using a PC with a standard physical layer protocol for the communications. ADC offers a complete EMS hardware and software turnkey solution to element management, as well as a software solution, where operators utilize their existing element management network. Host Site Capabilities The EMS performs the following functions at the host site: • Provides real-time information regarding faults • Displays various system level values (voltages, RF, power, etc.) • Records and generates history reports with time and date stamps • Adjusts performance related parameters of the Host Unit and Remote Unit • Permits placement of Host Unit and Remote Unit into standby mode • Allows download of new software versions to the Host Unit and Remote Units Off-Site Capabilities The EMS performs the following functions at off- site locations such as the NOC: • Provides real-time information regarding faults • Displays various system level values (voltages, RF, power, etc.) • Adjusts performance-related parameters of the Host Unit and Remote Unit • Permits placement of Host Unit and Remote Unit into standby mode The EMS provides real-time data to the operator at the NOC through an ASCII-based, RS-232- capable terminal. The ASCII terminal at the NOC communicates to the PC at the host site through an RS-232 port. In addition, the operator has the ability to remotely access the EMS over Ethernet, RS-232 to Ethernet connection. Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems NOC ASCII Terminal Host Site Host Unit 1 Host Unit 2 Host Unit 24 Site Manager: • EMS • SNMP Up to 20 km or more Up to 20 km or more Up to 20 km or more Remote Unit 1 Remote Unit 2 Remote Unit 24 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems SPECIFICATIONS RF SPECIFICATIONS Bandwidth Capacity: Frequency Bands Cellular A Band: Cellular B Band: PCS AD Band: PCS DBE Band: PCS BEF Band: PCS EFC Band: Forward/Reverse Gain: Gain Adjustment Range: Intermodulation: Spurious Emissions: Blocking Dynamic Range: Peak to Average Ratio: PROPAGATION DELAY Cellular/PCS: Adjustable Delay Setting: Delay Setting Adjustments: RF Input Level: Output Power: Input IP3: REVERSE PATH NOISE FIGURE Cellular/PCS: Maximum Reverse RF Output Level: ALC Range: PERFORMANCE MERIT FUNCTIONS TDMA/EDGE: GSM: iDEN ® : CDMA: Forward Path Single- and Dual-Band Solutions Available 869 to 891.5 MHz 880 to 894 MHz 1930 to 1950 MHz 1945 to 1970 MHz 1950 to 1975 MHz 1965 to 1990 MHz 78 +/- 3 dB at band center 30dB, in 1dB steps ≤ -52 dBc at remote output (two tone) ≤ -20 dBm (in-band) >10 dB <2.4 µsec (excluding fiber) 0 - 63 microseconds, software adjustable 0.1 µsec -40 to -9 dBm 6.5 Watts (+38 dBm) typical Composite at Antenna Port 7% EVM 4º RMS SQE decrease < 1 dB 0.97 rho factor Reverse Path Single- and Dual-Band Solutions Available 824 to 846.5 MHz 835 to 849 MHz 1850 to 1870 MHz 1865 to 1890 MHz 1870 to 1895 MHz 1885 to 1910 MHz 30 +/- 2 dB at band center 30 dB, 1 dB steps ≥ 70 dB <2.4 µsec (excluding fiber) 0 - 63 microseconds, software adjustable 0.1µsec -8.5 dBm -8.5 dBm -8.5 dBm 5 dB – Cellular/PCS -10 dBm composite -40 to –10 dBm peak 800 MHz Cellular Band (10W) RF Channel Composite Per RF Carrier Composite Per RF Carrier 1 38.5 dBm 38.5 dBm 7.0 Watts 7.0 Watts 2 38.5 dBm 35.4 dBm 7.0 Watts 3.5 Watts 4 38.5 dBm 32.4 dBm 7.0 Watts 1.8 Watts 8 38.5 dBm 29.4 dBm 7.0 Watts 0.9 Watts 16 38.5 dBm 26.4 dBm 7.0 Watts 0.4 Watts Output Power per Carrier Chart (Power Remains the Same Across All Modulations): 1900 MHz Cellular Band (10W) RF Channel Composite Per RF Carrier Composite Per RF Carrier 1 37.7 dBm 37.7 dBm 5.9 Watts 5.9 Watts 2 37.7 dBm 34.7 dBm 5.9 Watts 3.0 Watts 4 37.7 dBm 31.7 dBm 5.9 Watts 1.5 Watts 8 37.7 dBm 28.7 dBm 5.9 Watts 0.7 Watts 16 37.7 dBm 25.7 dBm 5.9 Watts 0.4 Watts 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 6 www.adc.com • +1-952-938-8080 • 1-800-366-3891 SPECIFICATIONS OPTICAL SPECIFICATIONS Fiber Type: Singlemode, 9/125 µm Fibers Required: 1 per Single-Band, 2 per Dual-Band WDM: Integrated in remote separate module required at host Transmit Device: SFP optical transceiver Fiber Connectors: OptiTap Angle Polished SC Return Loss Requirement: >12 dB Forward Wavelength: 1550 nm Reverse Path Wavelength: 1310 nm Optical Budget: 25 dB Standard GENERAL SPECIFICATIONS Operating Temperature Remote Unit: -30 to 50° C (-22 to 122° F) Host Unit: 0 to 50° C (32 to 122° F) Storage Temperature: -40 to 70° C (-40 to 158° F) Humidity: 10% to 90% non-condensing Lightning Protection Surge: 20kA IEC 1000-45 8/20 µs Waveform REMOTE UNIT Enclosure: NEMA 6/ IP-67 Mounting: Inside Pole, Pole Wrap, Wall, Strand, Sub-Terrain Vault, and Ceiling Dimensions (HxWxD) Single: 28.3" x 9.5" x 6.20" (719mm x 241mm x 157mm) Dual: 37.3" x 10.0" x 7.54" (947mm x 254mm x 192mm) WEIGHT Single: <40 lbs. (18.1 kg) Dual: <80 lbs. (36.3 kg) Optical connectors: Sealed OptiTap RF connector: N-Type Female (1 Port Single-system / 2 Ports Dual-system) HOST UNIT Mounting: 19- and 23-inch rack Dimensions (HxWxD): 2 Rack Units - 3.5" x 19.0" x 12.0" (89mm x 483mm x 305mm) Weight: 18 lbs. (8.16 kg) RF connector: N-Type Female POWER SOURCE Remote Unit Power Source: Wired to 90 – 265 VAC, 47 to 63 Hz Optional 60 – 89 VAC, 47 to 63 Hz (single-system only) REMOTE UNIT POWER REQUIREMENT (AT RATED POWER OUTPUT) Single: <200 W Dual: <400 W Host Unit Power Source: 21 to 60 VDC floating Host Unit Input Current: < 2A at 27.5VDC MTBF Host 80,000 Hours (Reliability at 25º C) Remote 30,000 Hours (Reliability at 25º C) AGENCY APPROVALS FCC : 800 MHZ - PART 22 & 1900 MHZ - PART 24 IC: RSS-131 COMPLETED AND PASSED UL 60950, UL 50, AND IEC 60529 REQUIREMENTS ENVIRONMENTAL TESTING Environmental Pollutants: Telcordia GR-2890-CORE Definition: Section 6.3 Earthquake Requirements: Telcordia GR-63-CORE, Issue 1 (pole mount) Salt Fog Test: Telcordia GR-2836-CORE Solar load: Telcordia GR-487-CORE (requires solar shield) Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems Note: Unless noted otherwise specifications are typical and subject to change 8/06 • 102981AE Digivance ® Street-Level Coverage Solution 7 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Digivance ® Street-Level Coverage Solution (SCS) 800 and 1900 MHz Systems Catalog Number DGVC- __ __ __ __ __ __ __ RU Frequency Band 1 800 Cellular 4 1900 PCS ORDERING INFORMATION Sub-Band 1 A - 800 2 B - 800 3 AD - 1900 4 DBE - 1900 5 BEF - 1900 6 EFC - 1900 Power Amplified 1 10W Power Supply 0 110/220 VAC 1 60-90 VAC xWDM 1 WDM Antenna Port 1 1 Port, Non-Diversity, N-Connector Host Unit/Remote Unit Optics 1 1550/1310 SCS Single-System Remote Unit Catalog Number DGVC- __ __ __ __ __ __ __ __ __ __ 0RU Frequency Band 1 1 800 Cellular 4 1900 PCS Sub-Band 1 1 A - 800 2 B - 800 3 AD - 1900 4 DBE - 1900 5 BEF - 1900 6 EFC - 1900 Power Amplifier 1 1 10W xWDM 1 WDM Antenna Port 2 2 Port, Non-Diversity, N-Connector Host Unit/Remote Unit Optics 2 1 1550/1310 SCS Dual-System Remote Unit Host Unit/Remote Unit Optics 1 1 1550/1310 Power Amplifier 2 1 10W Sub-Band 2 1 A - 800 2 B - 800 3 AD - 1900 4 DBE - 1900 5 BEF - 1900 6 EFC - 1900 Please Note: If this unit is populated with two bands, the lower forward path frequency = band 1. Frequency Band 2 1 800 Cellular 4 1900 PCS SPEC SHEET Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 102981AE 8/06 Revision © 2005, 2006 ADC Telecommunications, Inc. All Rights Reserved ORDERING INFORMATION Description Ordering Number SCS Host Unit SCS Host Unit, 800, Non-Diversity DGVL-102000HU SCS Host Unit, 1900, Non-Diversity DGVL-401000HU Accessories SCS solar shield, single enclosure DGVC-00000SS1 SCS solar shield, dual enclosure DGVC-00000SS2 SCS strand-mount kit (For Single-System Remote) DGVC-STRNDKIT Lighting Arrestor Protected "N" Male-Surge to "N" Female DGVX-LAP1MS1F1 Lighting Arrestor Protected "N" Male-Surge to DIN Female DGVX-LAP1MS2F1 SCS Power Cord, 20' (Comes with Remote Unit) DGVX-SCSPWR020 SCS Power Cord, 40' DGVX-SCSPWR040 SCS Power Cord, 60' DGVX-SCSPWR060 SCS Power Cord, 100' DGVX-SCSPWR100 Argus UPS, 300VA, 17Ah DGVX-UPS03001700 Argus UPS, 750VA, 17Ah DGVX-UPS07501700 Argus UPS, 300VA, 35Ah DGVX-UPS03003500 Argus UPS, 750VA, 35Ah DGVX-UPS07503500 WDM Chassis, Host; holds two HOST WDMs FVM-19X175-L VAM, WDM, Host, for single or dual band; two WDMs WDM-27U7UBG2A0001-DWH VAM, WDM, Host, for single-band; one WDM WDM-27U7UAG2A0001-DWH Ordering Information