1. Trang chủ
  2. » Công Nghệ Thông Tin

HIGHBAND® Category 6 Flush Mount Outlets and Patch Panels

4 393 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 4
Dung lượng 278,81 KB

Nội dung

HIGHBAND ® Category 6 Flush Mount Outlets and Patch Panels Using TrueNet ® Technology An integral part of KRONE's Premis NET ® GLOBAL LEADER * solution, the HIGHBAND ® family of products is a revolutionary system that exceeds all Category 6 standards for performance and reliability. The HIGHBAND range is designed to handle emerging technologies with high-speed applications as a key element. Utilising TrueNet ® technology HIGHBAND allows for maximum network throughput beyond one Gigabit. O FLUSH MOUNT OUTLETS KRONE HIGHBAND Flush Mount Category 6 RJ45 Outlets fit directly into Clipsal and HPM wall plates. This range of outlets has been designed specifically for use with KRONE's popular termination tool. The major feature of the Flush Mount Outlet is the unique Knife-Edge Pair Separator at the IDC which allows for accurate termination whilst helping to maintain consistent Category 6 performance. Outlets are also compatible with KRONE's Spring Loaded Shutter (part # 6467 1 115-00) and are available in a range of colours. O PATCH PANELS KRONE HIGHBAND Category 6 Patch Panels come pre-loaded with outlets to help improve installation time. These high-density patch panels are available in 16, 24 and 32 port versions to suit 19" rack cabinets. The sleek modern design also provides excellent labelling facilities and is packaged with KRONE's unique Masterminder Rear Cable Manager. The HIGHBAND Patch Panels also utilise KRONE's unique Knife-Edge Pair Separator feature. The high performance outlets and patch panel ports all exceed Category 6 ISO 11801 and TIA/EIA-568-B.2-1 component compliance. As with all KRONE products, you can rest-assured that the Category 6 Flush Mount Outlets and Patch Panels have been manufactured to the highest quality level possible, using state of the art technology. * GLOBAL LEADER is a comprehensive Category 6 communications solution, for leading corporations and businesses, wanting the most advanced network performance. KRONE'S KNIFE-EDGE PAIR SEPARATOR O The HIGHBAND Category 6 Flush Mount Outlet and HIGHBAND Category 6 Patch Panel incorporate KRONE's unique Knife-Edge Pair Separator feature. Many component compliant Category 6 RJ45 outlets require a cable manager to ensure the installer's termination practice does not compromise transmission performance. KRONE’s innovative Knife-Edge Pair Separator on these HIGHBAND products allows installers to leave cable pairs twisted at their original rate during installation. The Knife-Edge ensures each pair is secured into their respective positions without the need for untwisting. The clamping ribs then secure the wire in place before termination with the KRONE tool. Maintaining the minimum amount of untwist right up to the point of termination ensures that the transmission performance is not compromised. Not having to untwist each pair helps reduce the installation time and eliminates the need for an additional cable manager. For ease of installation, performance and organised cable management - nothing compares to KRONE HIGHBAND. Contact us now to find out how HIGHBAND can enhance your network performance. Clamping Ribs Maintaining The Twist Rate and Performance Knife Edge Pair Separators HIGHBAND CATEGORY 6 FMK RJ45 JACK TECHNICAL SPECIFICATIONS Environment for use: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Indoors Operation temperature range: . . . . . . . . . . . . . . . -10°C to + 60°C Relative humidity: . . . . . . . . . . . . . . . . . . . . ≤ 93° Non-condensing RJ Socket, 8 positions, general specification: . . . . . . . . .FCC 68.500 IEC 60603-7 Voltage/Current rating at 25°C ambient: .≤150 V AC at 2.5 A max. Dielectric strength: . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥ 1.5 kV AC RJ Interface resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20mΩ Wire diameter range for solid . . . . .0.50 - 0.65mm* (24-22 AWG) and stranded copper conductors Wire Insulation diameter range (PE, PVC) . . . . . . . . .1.04 - 1.60mm (0.041" - 0.063") Transmission, performance . . . . . . . ≥TIA/EIA 568-B.2-1Category 6 and reliability: ≥ ISO/IEC 11801 Category 6 Number of plug insertion cycles: . . . . . . . . . . . . . . . . . . . . . . ≥ 750 Number of wire terminations: . . . . . . . . . . . . . . . . . . . . . . . . ≥ 200 Safety: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL1863 Flammability of plastic components: . . . . . . . . . . . . . . . . .UL 94-V0 ACA Compliant * If any conductors have been terminated, reversal to smaller conductors is no longer possible. HIGHBAND CATEGORY 6 PATCH PANELS TECHNICAL SPECIFICATIONS Environment for use: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Indoors Operation temperature range: . . . . . . . . . . . . . . . -10°C to + 60°C Relative humidity: . . . . . . . . . . . . . . . . . . . . ≤ 93° Non-condensing RJ Socket, 8 positions, general specification: . . . . . . . . .FCC 68.500 IEC 60603-7 Voltage/Current rating at 25°C ambient: .≤150 V AC at 2.5 A max. Dielectric strength: . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥ 1.5 kV AC RJ Interface resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20mΩ Wire diameter range for solid . . . . . .0.50 - 0.65mm* (24-22 AWG) and stranded copper conductors Wire Insulation diameter range (PE, PVC) . . . . . . . . .1.04 - 1.60mm (0.041" - 0.063") Transmission, performance . . . . . . ≥ TIA/EIA 568-B.2-1 Category 6 and reliability: ≥ ISO/IEC 11801 Category 6 Number of plug insertion cycles: . . . . . . . . . . . . . . . . . . . . . . ≥ 750 Number of wire terminations: . . . . . . . . . . . . . . . . . . . . . . . . ≥ 200 Safety: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL1863 Flammability of plastic components: . . . . . . . . . . . . . . . . .UL 94-V0 For further information please contact: KRONE (Australia) Holdings Pty Limited PO Box 335, Wyong NSW 2259 2 Hereford Street, Berkeley Vale NSW 2261 Tel: 02 4389 5000 Fax: 02 4388 4499 Email: kronehlp@krone.com.au Web: www.krone.com.au Job No 6151 01/04 KRONE (N.Z.) Technique Limited PO Box 38-177 Wellington Mail Centre Wellington, New Zealand Tel: 0800 657 663 Fax: 0800 355 100 Email: sales@krone.co.nz HIGHBAND CATEGORY 6 PATCH PANELS ORDERING INFORMATION Description Colour Pack Qty Part Number HIGHBAND 16 Port Patch Panel with Masterminder Black Box of 1 6450 1 182-16 HIGHBAND 24 Port Patch Panel with Masterminder Black Box of 1 6450 1 182-24 HIGHBAND 32 Port Patch Panel with Masterminder Black Box of 1 6450 1 182-32 HIGHBAND CATEGORY 6 FMK RJ45 JACK ORDERING INFORMATION Description Colour Pack Qty Part Number HIGHBAND Flush Mount Category 6 Outlet White Bag of 10 6467 4 172-00 HIGHBAND Flush Mount Category 6 Outlet Black Bag of 10 6467 4 172-10 HIGHBAND Flush Mount Category 6 Outlet Grey Bag of 10 6467 4 172-20 HIGHBAND Flush Mount Category 6 Outlet Ivory Bag of 10 6467 4 172-30 HIGHBAND Flush Mount Category 6 Outlet Blue Bag of 10 6467 4 172-40 HIGHBAND Flush Mount Category 6 Outlet Red Bag of 10 6467 4 172-50 HIGHBAND Flush Mount Category 6 Outlet Yellow Bag of 10 6467 4 172-90 . HIGHBAND Flush Mount Category 6 Outlet White Bag of 10 64 67 4 172-00 HIGHBAND Flush Mount Category 6 Outlet Black Bag of 10 64 67 4 172-10 HIGHBAND Flush Mount. Mount Category 6 Outlet Grey Bag of 10 64 67 4 172-20 HIGHBAND Flush Mount Category 6 Outlet Ivory Bag of 10 64 67 4 172-30 HIGHBAND Flush Mount Category 6 Outlet

Ngày đăng: 05/11/2013, 11:15

TỪ KHÓA LIÊN QUAN