LoopStar® SONET Fiber Field Cabinet

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Spec Sheet LoopStar ® SONET Fiber Field Cabinet ADC's Loopstar ® Fiber Field Cabinet for ADC’s next-generation SONET platform offers service providers an economical solution for providing legacy TDM services (DS1/DS3) and next-generation Ethernet services in areas that cannot be served from local wire centers or mobile switching centers. In these environments, ADC’s small outdoor enclosure, packaged with ADC’s LoopStar 800 SONET access system and other supporting equipment, allows carriers to continue providing customer requirements and offering additional services. The cabinet supports up to 84 DS1s, 24 DS3s (or a combination thereof), 32 10/100 Ethernet circuits, or 8 Gigabit Ethernet drops from a single system. Features • Customized Purcell Systems TM RAC35 cabinet with all necessary cooling equipment • Offers self-sustaining cabinet, no reliance on external transmission systems or other network equipment • Houses one LoopStar 800 or 810 chassis • Includes all DSX cross connet panels, field pair protection, and all necessary fusing • Includes -48V redundant power plant with battery backup • Provides easy front access for all cable facility connections, equipment installation and maintenance support 2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 35.00” (88.9 CM) LoopStar SONET 800/810 Equipment Rectifier and Fuses Batteries A/C Outlet LoopStar ® SONET Fiber Field Cabinet The LoopStar 800 platform is an advanced next-generation SONET access system that allows service providers to cost-effectively deploy and manage TDM and Ethernet services to end-user customers from a single platform. Designed for both central office, mobile switching centers and customer premises environments, the LoopStar SONET family is ideally suited for all network deployment applications. With an integrated universal back-plane architecture, the system supports multiple, interchangeable network and tributary interface cards for easy and economical service deployments. Combined with advanced management, control and protection features, the LoopStar 800 system provides carriers the lowest total cost solution for delivering both TDM and Ethernet services. 1 0 / 0 6 • 1 0 2 8 9 2 A E LoopStar SONET Fiber Field Cabinet LoopStar 810 LoopStar 800 LoopStar SONET Field Cabinet 3 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 LoopStar ® SONET Fiber Field Cabinet 1 0 / 0 6 • 1 0 2 8 9 2 A E LoopStar SONET Fiber Field Cabinet Receptacles 15,20 STD, GF Equipment Tray Heater Mat Blank Plate 2k Air Conditioner Single Fan Plate Dual Fan Plate Plywood Backboard Ground Bar 8 Position Load Center Specifications PHYSICAL Exterior Dimensions (HxWxD): 35.0" x 24.0" x 20.0" (88.9 cm x 61.0 cm x 50.8cm) Interior Dimensions (HxWxD): 33.0" x 22.0" x 18.0" (83.8 cm x 55.9 x 45.7) Weight: 65 lbs (29.5 kg) (approximate) CONSTRUCTION Material: 0.125"–thick aluminum (lightweight, corrosion-resistant) Powder: Coat Paint - UL Pantone (ultra-light grey) TGIC polyester Insulation: Foil-backed insulation on interior surfaces DOOR 2 x 6 pattern of louvers provides 22.8 in of airflow Three-point latched, pad-lockable Gasket ASTM and UL rated for outdoor use EQUIPMENT MOUNTING EIA Std 19" Rack Rails 17U (29.75”) of rack space ENVIRONMENTAL Cooling: (1) or (2) 50 cfm fans with adjustable thermostat Heating: 100w heater with adjustable thermostat Electrostatic Air Filter: 1"-thick, washable, multi-layered aluminum/fiberglass OPTIONAL Air Conditioner with Heater: 2,000 Btu/Hr, 500W heater with power cord STANDARD FEATURES AC-Power Receptacle Box: Four-outlet gangbox for receptacles (GFI available) Knockouts: Four 0.65" dia. on cabinet bottom, two 2.5" on left side, two 2.5" on cabinet bottom Power Knockouts: Four ¾" dia. on cabinet bottom Grounding Tab: Two-hole tab electrically bonded to cabinet chassis Grounding Lugs: 8 interior grounding lugs OPTIONAL FEATURES Ground Bar: 7 position isolated copper ground bar Pole Mount Kit: Bracket and equipment for mounting to pole Telco Board (HxWxD): 20" x 23" x ¾” (50.8 cm x 58.4 cm x 1.9 cm) plywood back plate. 29" x 22.5" (73.7 cm x 57.2 cm) plate also available (ground bar can only be mounted on side with this option) Door Alarm: Door alarm option for security monitoring Load Center: 8-position load center available AGENCY LISTING UL 508A approved, NEMA Type 3R Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 102892AE 12/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved Spec Sheet Description Catalog Number LoopStar 800 Cabinet LPS-CABRAC35SF0419 LoopStar 800 Cabinet with Ground Bar LPS-CABRAC35SF0419GS LoopStar 810 Cabinet LPS-CABFIN810-L1 LoopStar Cabinet Pole Mount LPS-POLEMNTRAC35-L1 2K Air Conditioner for LoopStar 800 Cabinet (RAC 35) LPS-CABAIRCOND-L1 O r d e r i n g I n f o r m a t i o n . 8 9 1 Spec Sheet LoopStar ® SONET Fiber Field Cabinet ADC's Loopstar ® Fiber Field Cabinet for ADC’s next-generation SONET platform offers service. 8 0 0 - 3 6 6 - 3 8 9 1 LoopStar ® SONET Fiber Field Cabinet 1 0 / 0 6 • 1 0 2 8 9 2 A E LoopStar SONET Fiber Field Cabinet Receptacles 15,20 STD, GF Equipment