FIBER OPTIC SOLUTION Optical fibers with connectors Direction of propagation ferrule front face Optical fiber Ferrule Reflections Physical Contact (PC) Angled Physical Contact (APC) MM connections On MM connectors which are used almost exclusively in inhouse applications, reflections have no great influence on transmission quality. For this reason, MM connectors polishing are offered only with PC-MM. Optical fiber cables with connectors KRONE makes to order cable connections for single mode (SM) and multimode applications (MM) with optical connectors from our production and from other internationally leading manufacturers. Our range consists of a great variety of cable versions and lengths and connector types. All cables are halogen free and according to IEC 332-3C and IEC 332-1. SM connections The SM connector ferrules are offered with different types of polishing. Losses and reflections which can occur in the connection depend to a large degree on the form and the surface quality of the ferrule face. This in turn has a decisive influence on the signal transmission quality, especially in the case of high-rate digital as well as analogue transmission. The following ferrule polishing types are characterised: ■ PC polishing (Physical Contact) : The convex form of the end surfaces ensures that there is no gap between the fiber ends and thus hardly any reflection. The ferrule end surfaces are pressed against each other, when connected inside the adapter, so that the opposing fibers come into direct physical contact. Minimum return loss is 40 dB (SM fibers). ■ UPC polishing (Ultra Physical Contact) : In the case of UPC polishing, further polishing on the end surface achieves a minimum return loss of 50 dB (SM fibers). Just available for SC and FC. ■ APC polishing (Angled Physical Contact) : Further improvement of the return loss can be achieved by angled polishing technology. The convex end surfaces of the plug pins are polished at an angle of 8°or 9° to the fiber axis. The resulting reflections are therefore led out of the fiber core, independent of whether the connection has been established (fiber-fiber transmission ) . Minimum return loss is 60 dB (SM cables). PATCHCORDS AND PIGTAILS S FC DIN E2000 SC-SM Applications: - optical fiber networks for telecommunication applications - LAN, inhouse networks (Datacom) - measuring technology -cable TV Applications: - optical fiber networks - for telecommunication - applications - LAN, inhouse networks - (Datacom) - measuring technology -cable TV Applications: - optical fiber networks - for telecommunication - applications - LAN, inhouse networks - (Datacom) - measuring technology -cable TV Applications: - optical fiber networks - for telecommunication - applications - LAN, inhouse networks - (Datacom) - measuring technology -cable TV ■ can be mounted in rows, giving high packing density ■ for SM fibers (9/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ due to push-pull locking mechanism easy-to-use with high tensile strength ■ types of polishing : PC, UPC, APC8°, APC 9° ■ colour coding: PC, UPC: blue housing APC: green housing ■ plastic connector housing with ceramic ferrule ■ plastic adapter housing with ceramic sleeve, mounted using two M2 screws or snap-in connection ■ conforms to IEC 874-14, CECC 86260 and FTZ TL 6060-3016 ■ compatible to NTT standard ■ for SM fibers (9/125 µm) optional: MM fibers (50/125 and 62.5/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ thread coupling ■ types of polishing : for SM fibers: PC, UPC, APC8°, for MM fibers: PC ■ colour coding: PC, UPC: black bend protection APC: green bend protection ■ brass connector housing (nickel plated) with ceramic ferrule ■ brass adapter housing (nickel plated) with ceramic sleeve, on SF version mounted using 2 M2 screws or on RF version using union nut ■ meets IEC 874-7 and CECC 86115-802 ■ compact design ■ for SM fibers (9/125 µm) optional: MM fibers (50/125 and 62.5/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ thread coupling ■ types of polishing : for SM fibers: PC, APC8°, for MM fibers: PC ■ colour coding: PC, UPC: black bend protection APC: green bend protection ■ brass connector housing (nickel plated) with ceramic ferrule ■ brass adapter housing (nickel plated) with ceramic sleeve, mounted using 2 union nuts ■ meets DIN 47256, CECC 86135-801 and FTZ TL 6060-3001, part 1 to 7 ■ can be mounted in rows, giving high packing density ■ integrated dust and laser protection ■ mechanical or colour coding (optional) ■ for SM fibers (9/125 µm) optional: MM fibers (50/125 and 62.5/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ due to push-pull locking easy-to-use ■ types of polishing : PC, APC8°, ■ colour coding: PC, UPC: blue housing APC: green housing ■ plastic connector housing with ceramic ferrule ■ plastic adapter housing with ceramic sleeve, mounted using – two M2 screws or metal clip, or – integrated plastic clip (= compact adapter ■ insertion loss: < 0.5 dB typ.0.2 dB ■ return loss: PC polishing:>40 dB UPC polishing:>50 dB APC8°polishing:>60 dB APC9°polishing:>55 dB ■ service life:1000 cycles (PC, APC) ■ tensile strength:100 N (cable) ■ insertion loss: < 0.5 dB typ.0.2 dB ■ return loss: PC polishing :>40 dB APC polishing :>60 dB ■ service life:1000 cycles ■ tensile strength:100 N (cable) ■ meets CECC 86275-801 and -802 and FTZ TL 6060-3015 ■ insertion loss: < 0.5 dB typ.0.2 dB ■ return loss: PC polishing :>40 dB APC polishing :>60 dB ■ service life:1000 cycles ■ tensile strength:100 N (cable) ■ insertion loss: < 0.5 dB typ.0.2 dB ■ return loss: PC polishing :>40 dB UPC polishing :>50 dB APC polishing :>60 dB ■ service life:1000 cycles (PC, APC) ■ tensile strength:100 N (cable) Ordering examples FC/PC patchcord, SM, 3 mm cable length 3 m 7006 1 222-23 length 5 m 7006 1 222-25 length 10 m 7006 1 222-27 FC/PC pigtail, SM, 0.9 mm buffered fibre length 3 m 7006 1 120-23 length 5 m 7006 1 120-25 FC/PC Adapter (SF), also for UPC polishing Qty 1 pc 6824 2 300-04 FC/PC Adapter (RF), also for UPC polishing Qty 1 pc 6824 2 300-12 FC/APC Adapter (SF) Qty 1 pc 6824 2 300-06 Ordering examples DIN/APC8° patchcord, SM, 3 mm cable length 3 m 7006 1 233-23 length 5 m 7006 1 233-25 length 10 m 7006 1 233-27 DIN/APC8° pigtail, SM, 0.9 mm buffered fiber length 3 m 7006 1 130-23 length 5 m 7006 1 130-25 DIN adapter for PC and APC polishing Qty 1 pc 6824 2 300-16 Ordering examples E2000/PC patchcord, SM, 3 mm cable length 3 m 7006 1 244-23 length 5 m 7006 1 244-25 length 10 m 7006 1 244-27 E2000/PC pigtail, SM, 0.9 mm buffered fibre length 3 m 7006 1 140-23 length 5 m 7006 1 140-25 E2000/PC Adapter (incl. screws and clip) Qty 1 pc 6824 2 300-18 E2000/APC Adapter (incl. screws and clip) Qty 1 pc 6824 2 300-20 E2000/PC Adapter (compact) Qty 1 pc 6824 2 300-33 E2000/APC Adapter (compact) Qty 1 pc 6824 2 300-31 Ordering example SC/APC8° patchcord, SM, 3 mm cable length 3 m 7006 1 211-33 7006 1 211-23 length 5 m 7006 1 211-35 7006 1 211-25 length 10 M7006 1 211-37 7006 1 211-27 SC/APC8° pigtail, SM, 0.9 mm buffered fibre length 3 m 7006 1 110-33 7006 1 110-33 length 5 m 7006 1 110-35 7006 1 110-35 SC/PC Adapter, also for UPC polishing Qty 1 pc 6824 2 300-00 SC/APC Adapter Qty 1 pc 6824 2 300-02 Ordering examples ST/PC patchcord, 3 mm cable MM (50/125) MM (62.5/125) length 2 m 7006 2 255-12 7006 3 255-12 length 5 m 7006 2 255-15 7006 3 255-15 ST/PC pigtail, 900µm buffered fibre MM (50/125) MM (62.5/125) length 3 m 7006 2 150-13 7006 3 150-13 length 5 m 7006 2 150-15 7006 3 150-15 ST adapter Qty 1 pc 6824 2 300-08 Ordering examples SC-MM patchcord, 3 mm cable MM (50/125) MM (62.5/125) length 2 m 7006 2 211-12 7006 3 211-12 length 5 m 7006 2 211-15 7006 3 211-15 SC-MM pigtail, 900µm buffered fibre MM (50/125) MM (62.5/125) length 3 m 7006 2 110-13 7006 3 110-13 length 5 m 7006 2 110-15 7006 3 110-15 SC-MM Adapter (ceramic) Qty 1 pc 6824 2 213-00 SC-MM Adapter (phosphor bronze) Qty 1 pc 6824 2 215-00 SC-MM SC-Duplex MT-RJ ST Applications: - LAN, inhouse networks - (Datacom) - computer peripherals Applications: - LAN, inhouse networks - (Datacom) - computer peripherals Applications: - LAN, inhouse networks - (Datacom) Applications: - LAN, inhouse networks - (Datacom) ■ compatible with AT&T-STII standard ■ for MM fibers (50/125 µm and 62.5/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ bayonet coupling, quick and easy-to-use ■ types of polishing : PC ■ Zinc diecast connector housing with ceramic ferrule ■ Zinc diecast adapter housing with ceramic sleeve, mounted using union nut ■ meets IEC 874-10 and CECC BFOC/2.5 ■ can be mounted in rows, giving high packing density ■ for MM fibers (50/125 µm and 62.5/125 µm) ■ cable versions: buffered fiber (ø 0.9 mm) cable (ø 3 mm) duplex cable (2 x ø 3 mm) ■ due to push-pull locking mechanism easy-to-use with high tensile strength ■ types of polishing : PC ■ colour coding: beige housing ■ connector housing in plastic with ceramic ferrule ■ adapter housing in plastic with ceramic or phosphor bronze sleeve, mounted using 2 M2 screws or snap-in connection. ■ meets EN 50173 and ANSI/TIA/EIA-568-A ■ compatible with AT&T-STII standard ■ for MM fibers (50/125 µm and 62.5/125 µm) ■ cable versions: duplex cable (2 x ø 3 mm) ■ due to push-pull locking mechanism easy-to-use with high tensile strength ■ types of polishing : PC ■ colour coding: beige housing ■ connector housing in plastic with ceramic ferrule ■ adapter housing in plastic with ceramic or phosphor bronze sleeve, mounted using 2 M2 screws or snap-in connection. ■ meets EN 50173 and ANSI/TIA/EIA-568-A ■ for MM fibers (50/125 µm and 62.5/125 µm) ■ types of polishing : PC ■ colour: dark grey ■ connector housing in plastic with ceramic ferrule ■ meets EN 186530 (draft) and ANSI/TIA/EIA-568-B, ISO/IEC 11801 ■ insertion loss: < 0.5 dB typ.0.2 dB ■ service life:1000 cycles ■ tensile strength:50 N (cable) Ordering examples DIN/APC8° patchcord, SM, 3 mm cable length 3 m 7006 1 233-23 length 5 m 7006 1 233-25 length 10 m 7006 1 233-27 DIN/APC8° pigtail, SM, 0.9 mm buffered fiber length 3 m 7006 1 130-23 length 5 m 7006 1 130-25 DIN adapter for PC and APC polishing Qty 1 pc 6824 2 300-16 Ordering Call for more NEW! information! ■ insertion loss: < 0.5 dB typ.0.2 dB ■ service life:1000 cycles (PC, APC) ■ tensile strength:100 N (cable) ■ insertion loss: < 0.5 dB typ.0.2 dB ■ service life:1000 cycles ■ tensile strength:100 N (cable) ■ insertion loss: < 0.5 dB typ.0.2 dB ■ service life:1000 cycles ■ tensile strength:100 N (cable) HK/F16/02/2001 Qty. = 1 pc. Order No.: length: 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m 6 = 8 m 7 = 10 m 8 = 15 m 9 = 20 m conn. 1 and 2: 1 = SC 2 = FC 3 = DIN 4 = E2000 5 = ST 7 = Duplex-SC 0 = no connector (-> Pigtail) polishing:1 = PC-MM 2 = PC-SM 5 = UPC 3 = APC8º 4 = APC9° cable: 1 = buffered fiber 2 = cable 5 = duplex cable fiber: 1 = SM 2 = MM (50/125) 3 = MM (62,5/125) 0 6 7 0 Standard Deutsche Telekom AG Combination possibilities: SC-SM FC DIN E2000 ST SC-MM SC-Duplex Fiber type SM (9/125 µm) MM (GI, 50/125 µm) MM (GI, 62.5/125 µm) Cable buffered fiber (ø 0.9 mm) Cable (ø 3 mm) Duplex cable (2 x ø 3 mm) Polishing PC-MM PC-SM (RL > 40 dB) UPC (RL > 50 dB) APC8° (RL > 60 dB) APC9° (RL > 55 dB) KRONE Australia Tel: +61 2 4388 4422 Fax: +61 2 4388 4499 E-mail: kronehlp@krone.com.au KRONE China Tel: +86 21 5442 3680 Fax: +86 21 5442 2711 E-mail: webmaster@krone.com.cn KRONE Hong Kong Tel: +852 2865 4888 Fax: +852 2861 1444 E-mail: marketing@krone.com.hk KRONE Japan Tel: +81 3 3549 0311 Fax: +81 3 5565 2858 E-mail: masato.miyazaki@krone.co.jp KRONE India Tel: +91 80 225 1904 Fax: +91 80 225 1693 E-mail: sales.india@krone.com KRONE Indonesia Tel: +62 21 520 0231 Fax: +62 21 522 1312 E-mail: agus.kumala@krone.co.id KRONE Taiwan Tel: +886 2 2784 1680 Fax: +886 2 2702 5050 E-mail: stewart.yao@krone.com.hk KRONE New Zealand Tel: +64 4 576 9213 Fax: +64 4 576 9243 E-mail: sales@krone.co.nz KRONE Vietnam Tel: +84 4 934 3968- Ext:145, 146 Fax: +84 4 934 3956 E-mail: da.ngo@hn.vnn.vn KRONE Philippines Tel: +632 848 9901 Fax: +632 848 9904 E-mail: larry.cunanan@.krone.com KRONE Singapore & Malaysia Tel: +65 538 8628 Fax: +65 538 8636 E-mail: kfe.mktg@krone.com KRONE Korea Tel: +82 2 565 4844 Fax: +82 2 555 5779 E-mail: by.lim@krone.com.hk KRONE Thailand Tel: +662 637 8301 Fax: +662 637 8306 E-mail: prakit.homnan@krone.com www.kroneasia.com . - cable TV Applications: - optical fiber networks - for telecommunication - applications - LAN, inhouse networks - (Datacom) - measuring technology - cable. (Datacom) - measuring technology - cable TV Applications: - optical fiber networks - for telecommunication - applications - LAN, inhouse networks - (Datacom) -