w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 SPEC SHEET Pro Patch ™ Programmable Series High-Density Bantam Patching System The new Pro Patch ™ Programmable bantam modular system offers unprecedented reliability and flexibility in a convenient, space-saving size and lightweight package. Specifically engineered for every day use in demanding mobile trucks, the Pro Patch Programmable system is the only product in its class that passes stringent MIL-STD-202F standards for vibration and environmental requirements. The Pro Patch Programmable system is a WECO-standard bantam module in a high-density (2 x 48) one- rack space panel. The modular design allows individual front jack access for circuit and ground configurations without having to take the entire panel off-line or removing it from the rack. Each modular bantam jack features gold crossbar contacts that provide self-cleaning action and maximize reliability. Jack modules are also individually sealed which prevents dust and contamination of the jacks from convection plenum action common in rack-mounted systems. The Pro Patch Programmable series is available in several termination options including EDAC/ELCO 3-pin, 56-pin, 90-pin and AMP “champ” 50-pin connectors in both an eight-connector version for audio and a four-connector version for RTS/Clear-Comtype intercom systems. Only five inches deep and 6.2 pounds fully configured, the Pro Patch Programmable series is unmatched in the marketplace. Using ADC’s patent-pending escutcheon kit, the one rack unit panel can be converted to a 1.5 rack unit configuration. This allows the use of ADC’s ultra-large designation strips, providing room for three lines of text – the largest designation on the market, reducing the number of strips used and saving valuable installation time. With the introduction of the new Pro Patch high-density series, ADC continues to bring you the best performing, highest quality audio patching products in the broadcast market. 4 / 0 6 • 1 0 2 7 1 9 A E Pro Patch ™ High-Density Bantam Patching System Pro Patch ™ Programmable Series High-Density Bantam Patching System 2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Features • Industry’s only bantam audio panel fully qualified to meet demanding military standards (MIL-STD 202F) for ruggedness, and MIL-J-641E for jack compliance • High-density 2x48 WECO-compliant bantam jacks on 0.312-inch centers • DIP switch selectable circuit normals and grounds • Ultra-shallow five-inch depth • Fully AES/EBU 110 Ohm digital and analog compliant • Lightweight panels weigh only 6.2 pounds • Modular design allows individual jack access/configuration without affecting other circuits • Grounds can be configured on an individual circuit basis for lift, chassis, sleeve, and common ground • Modules snap into place, tabs lock into chassis • Circuit status icons allow users to identify circuit status with colored snap-in icons in eight colors • Designation strips cover tabs to prevent unauthorized access to circuit configuration switches • Converts to a 1.5 rack unit panel with a patent-pending escutcheon kit • Largest designations on the market, 0.410-inch top and bottom for 1 rack unit, 0.680-inch top and bottom for 1.5 rack unit • New 1.4-inch straddle designation strip kit uses one strip for two panels, cutting designation strip labor in half EDAC 90-pin Chassis (Front View) EDAC 90-pin Chassis with 1.5 Designation Strips EDAC 90-pin Chassis (Rear View) EDAC 56-pin Chassis (Rear View) EDAC 3-pin Chassis (Rear View) 4 / 0 6 • 1 0 2 7 1 9 A E Pro Patch ™ High-Density Bantam Patching System Pro Patch ™ Programmable Series High-Density Bantam Patching System 3 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 3.300 1.180 .295 J1 J2 Circuit Status icon identifier with 3 colors included (8 colors available) 2 Bantam Jack Cord Individual Jack Access Each Pro Patch ® Progr ammable bantam panel features 48 individual bantam jack cards. Cards contain an individual circuit pair of jacks, front panel circuit status snap-in icon, and seven- position sealed DIP switch for normals and grounds configuration. The gold-plated header card plugs and sockets contained in the chassis ensure maximum reliability. To remove a jack, first remove the top and bottom designation strips, push down the locking tab on the jack module and slide the module out from the front of the chassis. It is not necessary to remove the entire panel from the rack, or the cover from the chassis. Unauthorized circuit changes are eliminated because switches are hidden from front panel view. The Pro Patch Programmable bantam system is the only product in its class that passes demanding MIL-202 environmental testing for thermal shock, resistance from moisture contamination, plating corrosion from salt fog, and vibration to simulate long-term over-the- road use. 1 5 7 2 4 6 8 3 T R S SB T R S ISO GND 8 PIN CARD EDGE CONNECTOR REAR CHASSIS 50 PIN CONNECTOR REAR CHASSIS REFERENCE CHASSIS SCHEMATIC (TYPICAL 48 POSITION) 25-PIN Receptacle (8) 1 RU 48-Position Bantam/AMP 50-pin Audio Panel (Rear View) 1 5 7 2 4 6 8 3 T R S SB T R S ISO GND 8 PIN CARD EDGE CONNECTOR REAR CHASSIS 50 PIN CONNECTOR REAR CHASSIS REFERENCE CHASSIS SCHEMATIC (TYPICAL 48 POSITION) 25-PIN Receptacle (4) 1 RU 48-Position Bantam/AMP 50-pin Intercom Panel, with bussed grounds (Rear View) Pro Patch Programmable bantam panel allows individual front-panel jack access for normals and grounds without having to take the entire panel off-line. Special 7-position DIP switches allows configuration of the circuit normal and grounds without cumbersome jumpers or pins to lose. (See-through cover in photo is for demonstration purposes only.) SPEC SHEET Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 102719AE 4/06 Revision © 2004, 2006 ADC Telecommunications, Inc. All Rights Reserved Description Ordering Number Preconfigured Systems 1RU 2x48 EDAC 90-pin, half-normalled PP1248-E90-HN EDAC 3-pin, half-normalled PP1248-E3-HN EDAC 56-pin, half-normalled PP1248-E56-HN EDAC 90-pin, normals strapped PP1248-E90-NS EDAC 3-pin, normals strapped PP1248-E3-NS EDAC 56-pin, normals strapped PP1248-E56-NS EDAC 90-pin, half-normalled, with connector kits PP1248-E90-HN-S EDAC 3-pin, half-normalled, with connector kits PP1248-E3-HN-S EDAC 56-pin, half-normalled, with connector kits PP1248-E56-HN-S EDAC 90-pin, normals strapped, with connector kits PP1248-E90-NS-S EDAC 3-pin, normals strapped, with connector kits PP1248-E3-NS-S EDAC 56-pin, normals strapped, with connector kits PP1248-E56-NS-S AMP 50-pin audio, half-normalled PPP1248-A50-HN AMP 50-pin audio, normals strapped PPP1248-A50-NS AMP 50-pin intercom, half-normalled, bussed ground PPP1248-ICA50-HN AMP 50-pin intercom, normals strapped, bussed ground PPP1248-ICA50-NS Accessories 1RU bantam audio module AM1-BAN Designation kits .440" VP-DES-440 .680" VP-DES-680-B .1500" VP-DES-1500-B 1.5 RU chassis conversion kit PPP-15-CHAS-KIT O r d e r i n g I n f o r m a t i o n PPP1248-E90-NS AM1-BAN PPP1248-E90 PPP-15-CHAS-KIT . 8 9 1 SPEC SHEET Pro Patch ™ Programmable Series High-Density Bantam Patching System The new Pro Patch ™ Programmable bantam modular system offers unprecedented. 0 6 • 1 0 2 7 1 9 A E Pro Patch ™ High-Density Bantam Patching System Pro Patch ™ Programmable Series High-Density Bantam Patching System 2 w w w . a d