| Tài liệu tham khảo |
Loại |
Chi tiết |
| 1. S. Scott Crump, “Apparatus and method for creating three -dimensional objects. ” United States Patent Application Publication US 5121329, 9/5/1992 |
Sách, tạp chí |
| Tiêu đề: |
S. Scott Crump, “"Apparatus and method for creating three -dimensional objects |
|
| 2. Anna Bellini “ Fused Deposition of Ceramics: A Comprehensive Experimental, Analytical and Computational Study of Material Behavior, Fabrication Process and Equipment Design” - Thesis of Drexel University, 2002 |
Sách, tạp chí |
| Tiêu đề: |
Fused Deposition of Ceramics: A Comprehensive Experimental,Analytical and Computational Study of Material Behavior, Fabrication Processand Equipment Design” |
|
| 3. M.K. Agarwala “Fused Deposition of Ceramics and Metals” - Center for Ceramic Research, Rutgers University, 2007 |
Sách, tạp chí |
| Tiêu đề: |
Fused Deposition of Ceramics and Metals” |
|
| 4. M. Nikzad “Thermo-Mechanical Properties of a Metal -filled Polymer Composite for Fused Deposition Modelling Applications” - Faculty of Engineering and Industrial Sciences, Swinburne University of T echnology, 2007 |
Sách, tạp chí |
| Tiêu đề: |
Thermo-Mechanical Properties of a Metal -filled Polymer Compositefor Fused Deposition Modelling Applications” |
|
| 5. Rhys Jones “New RepRap Materials” - Department of Mechanical Engineering, Bath University, Bath BA2 7AY, UK, 2009 |
Sách, tạp chí |
| Tiêu đề: |
New RepRap Materials” |
|
| 6. John Paul Wachsmuth “Multiple Independent Extrusion Heads for Fused Deposition Modeling” Thesis of the Virginia Polytechnic Institute and State University, 2008 |
Sách, tạp chí |
| Tiêu đề: |
John Paul Wachsmuth “"Multiple Independent Extrusion Heads for FusedDeposition Modeling” |
|
| 7. Vedansh Chaturvedi “ PARAMETRIC OPTIMIZATION OF FUSED DEPOSITION MODELING USING RESPONSE SURFACE METHODOLOGY”Thesis of National Institute of Technology Rourkela, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Vedansh Chaturvedi “ "PARAMETRIC OPTIMIZATION OF FUSEDDEPOSITION MODELING USING RESPONSE SURFACE METHODOLOGY” |
|
| 8. Adrian Tan & Timothy Nixon “RAPID PROTOTYPE MAN UFACTURING SYSTEM” Thesis of The Adelaide University, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Adrian Tan & Timothy Nixon “"RAPID PROTOTYPE MAN UFACTURINGSYSTEM” |
|
| 9. Swank ML, Stucker BE, Medina FR, Wicker RB “Integrating UC and Create a Support Materials Deposition System” The Utah State University - The University of Texas, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Swank ML, Stucker BE, Medina FR, Wicker RB"“Integrating UC and Createa Support Materials Deposition System” |
|
| 11. Yu zhen jin, Jia fan zhang, Ying wang, Zu chao zhu “Filament geometrical model and nozzle trajectory analysis in the FDM process” The Zhejiang University – The Hangzhou University, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Yu zhen jin, Jia fan zhang, Ying wang, Zu chao zhu"“Filament geometricalmodel and nozzle trajectory analysis in the FDM process” |
|
| 12. John Samuel Batchelder et al , “Method and apparatus for solid prototyping .”United States Patent Application Publication US 5764521, 9/6/1998 |
Sách, tạp chí |
| Tiêu đề: |
John Samuel Batchelder et al, “"Method and apparatus for solid prototyping |
|
| 13. S. Scott Crump et al, “Process of support removal for fused deposition modeling.” United States Patent Application Publication US 5503785, 2/4/1996 |
Sách, tạp chí |
| Tiêu đề: |
Process of support removal for fused depositionmodeling |
|
| 14. Jim Comb et al, “Rapid prototyping apparatus .” United States Patent Application Publication US 5939008, 17/8/1999 |
Sách, tạp chí |
| Tiêu đề: |
Rapid prototyping apparatus |
|
| 15. Joseph Edward Labossiere và Marvin E.Eshelman Rapid prototyping system with controlled material feedstock United States Patent Application Publication US007384255B2, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Rapid prototypingsystem with controlled material feedstock |
|
| 16. Paul J. Leavitt, “Extrusion head for use in extrusion -based layered deposition modeling.” United States Patent Application Publication US 2009/0035405 A1, 5/2/2009 |
Sách, tạp chí |
| Tiêu đề: |
Extrusion head for use in extrusion -based layered depositionmodeling |
|
| 17. James W. Comb et al , “EXTRUSION-BASED LAYERED DEPOSITION SYSTEMS USING SELECTIVE RADIATION EXPOSURE .” The United States Patent Application Publication US 2010/0140849, 10/6/2010 |
Sách, tạp chí |
| Tiêu đề: |
EXTRUSION-BASED LAYERED DEPOSITIONSYSTEMS USING SELECTIVE RADIATION EXPOSURE |
|
| 18. Michael Montero, Shad Roundy, Dan Odell, Sung -Hoon Ahn and Paul K.Wright “Material Characterization of Fused Deposition Modeling (FDM) ABS by Designed Experiments ” University of California, Gyeongsang National University, 2001 |
Sách, tạp chí |
| Tiêu đề: |
Material Characterization of Fused Deposition Modeling (FDM) ABS byDesigned Experiments |
|
| 19. Yao Wang, Kim Kiekens and Wim Dewuf “ Construction and process parameter optimization of a rapman 3D printer”, Leuven Engineering College, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Construction and processparameter optimization of a rapman 3D printer” |
|
| 21. S.A Widyanto, A.E Tontowi, Jamasri, dan Heru Santosa B.R: “ Determination of operation condition and product dimension accuracy optimization of filament deposition modelling on layer manufacturing application”, 2006 |
Sách, tạp chí |
| Tiêu đề: |
Determinationof operation condition and product dimension accuracy optimization of filamentdeposition modelling on layer manufacturing application” |
|
| 22. S.Scott Crump, “System and method for building three -demensional objects with metal-based alloys “ United States Patent Application Publication US 7942987B2, 17/5/2011 |
Sách, tạp chí |
| Tiêu đề: |
System and method for building three -demensional objects withmetal-based alloys |
|