| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1]. Ho K.H., Newman S.T., State of the art electrical discharge machining, International Journal of Machine Tools & Manufacture 43, pp.1287–1300, (2003) |
Sách, tạp chí |
| Tiêu đề: |
State of the art electrical discharge machining |
|
| [2]. Zhang Y., Liu Y., Shen Y., Ji R., Cai B., Li H., Wang F., A Review of the Current Understanding and Technology of Powder Mixed Electrical Discharge Machining (PMEDM), Conference: Mechatronics and Automation (ICMA), (2012) |
Sách, tạp chí |
| Tiêu đề: |
A Review of the Current Understanding and Technology of Powder Mixed Electrical Discharge Machining (PMEDM) |
|
| [3]. Tzeng Y. F., Lee C. Y., Effects of Powder Characteristics on Electro discharge Machining Efficiency, Int J Adv Manuf Technol17, pp. 586–592, (2001) |
Sách, tạp chí |
| Tiêu đề: |
Effects of Powder Characteristics on Electro discharge Machining Efficiency |
|
| [4]. Bhattacharya A., Batish A., Kumar N., Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process, Journal of Mechanical Science and Technology 27, pp.133-140, (2013) |
Sách, tạp chí |
| Tiêu đề: |
Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process |
|
| [5]. Kansal H.K., Singh S., Kumar P., Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel, Journal of Manufacturing Processes, 9, (2007) |
Sách, tạp chí |
| Tiêu đề: |
Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel |
|
| [6]. Molinetti A., Amorim F. L., Soares P. C., Czelusniak T., Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process, Int J Adv Manuf Technol, (2015) |
Sách, tạp chí |
| Tiêu đề: |
Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process |
|
| [7]. Uno Y., Okada A., Surface generation mechanism in electrical discharge machining with silicon powder mixed fluid, Int. J. Elec. 2, pp.13-18, (1997) |
Sách, tạp chí |
| Tiêu đề: |
Surface generation mechanism in electrical discharge machining with silicon powder mixed fluid |
|
| [9]. Chow H. M, Yan B. H., Huang F. Y., Hung J. C., Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining, Journal of Materials Processing Technology 101, pp.95–103, (2000) |
Sách, tạp chí |
| Tiêu đề: |
Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining |
|
| [10]. Wong Y.S., Lim L.C., Rahuman I., Tee W.M., Nearmirror-finish phenomenon in EDM using powder-mixed dielectric, Journal ofMaterials Processing Technology 79, pp.30–40, (1998) |
Sách, tạp chí |
| Tiêu đề: |
Nearmirror-finish phenomenon in EDM using powder-mixed dielectric |
|
| [11]. Raghuman I., Investigation into EDM using powder mixed dielectric, Masters thesis, National university of Singapore, (1994) |
Sách, tạp chí |
| Tiêu đề: |
Investigation into EDM using powder mixed dielectric |
|
| [12]. Wang C.H., Lin Y.C., Yan B.H., Huang, F.Y., Effect of characteristics of added powder on electric discharge machining, J. Jpn. Inst. Light Met. 42, pp.2597- 2604, (2001) |
Sách, tạp chí |
| Tiêu đề: |
Effect of characteristics of added powder on electric discharge machining |
|
| [13]. Wu K. L., Yan B. H., Huang F. Y., Chen S. C., Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric, International Journal of Machine Tools & Manufacture 45, pp.1195–1201, (2005) |
Sách, tạp chí |
| Tiêu đề: |
Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric |
|
| [15]. Yan B. H., Lin Y. C., Huang F. Y., Wang C. H., Surface Modification of SKD61 during EDM with Metal Powder in the Dielectric, Materials transactions, Vol.42, pp.2597 – 2604, (2001) |
Sách, tạp chí |
| Tiêu đề: |
Surface Modification of SKD61 during EDM with Metal Powder in the Dielectric |
|
| [16]. Bhattacharya A., Batish A., Singh G., Singla V. K., Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM, Int J Adv Manuf Technol, (2011) |
Sách, tạp chí |
| Tiêu đề: |
Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM |
|
| [17]. Garg R.K., Ojha K., Parametric Optimization of PMEDM Process with Nickel Micro Powder Suspended Dielectric and Varying Triangular Shapes Electrodes on EN-19 Steel, Journal of Engineering and APlied Sciences, 6, pp. 152-156, (2011) |
Sách, tạp chí |
| Tiêu đề: |
Parametric Optimization of PMEDM Process with Nickel Micro Powder Suspended Dielectric and Varying Triangular Shapes Electrodes on EN-19 Steel |
|
| [18]. Kansal H.K., Singhz S., Kumara P., Performance Parameters Optimization. Of Powder Mixed Electric-Discharge Machining, (PMEDM) By Taguchi Method, West Indian Journal of Engineering, 29(1) |
Sách, tạp chí |
| Tiêu đề: |
Performance Parameters Optimization. "Of Powder Mixed Electric-Discharge Machining, (PMEDM) By Taguchi Method |
|
| [20]. Kansal H. K., Singh S., Kumar P., Technology and research developments in powder mixed electric discharge machining (PMEDM), J Mater Process Technol 184, 32-41, (2007) |
Sách, tạp chí |
| Tiêu đề: |
Technology and research developments in powder mixed electric discharge machining (PMEDM |
|
| [21]. Kumar S., Singh R., Singh T.P., Sethi B.L. (2009), Surface modification by electrical discharge machining: A review, Journal of Materials Processing Technology 209, pp. 3675–3687 |
Sách, tạp chí |
| Tiêu đề: |
Surface modification by electrical discharge machining: A review |
| Tác giả: |
Kumar S., Singh R., Singh T.P., Sethi B.L |
| Năm: |
2009 |
|
| [26] N. Mohri, N. Saito, M. Higashi, N. Kinoshita (1991), A New Process of Finish Machining on Free Surface by EDM Methods, Annals of the CIRP, Vol 40 |
Sách, tạp chí |
| Tiêu đề: |
A New Process of Finish Machining on Free Surface by EDM Methods |
| Tác giả: |
N. Mohri, N. Saito, M. Higashi, N. Kinoshita |
| Năm: |
1991 |
|
| [28] Singh, S., Kansal, H.K., Kumar, P., 2005. Parametric optimization of powder mixed electrical discharge machining by response surface methodology. Journal of Materials Processing Technology 169 (3), 427–436 |
Sách, tạp chí |
| Tiêu đề: |
Parametric optimization of powder mixed electrical discharge machining by response surface methodology |
|