Multiport Data/Voice Interface Module

Campus-RS FLEX Campus-RS™ FLEX is an interface module that installs directly into a Campus-RS remote or Campus-RS Star concentrator and provides a multiport local interface capable of supporting a wide range of concurrent data, voice and video applications. Campus-RS FLEX supports a line speed of 1.544 Mbps (T1) and provides the capability to allocate this bandwidth between the single DSX-1 port and the two serial data ports. The DSX-1 provides support for up to 24 voice channels over a T1 backbone. The two serial data ports support a variety of standard physical interfaces, including RS-449, RS-530, RS-530A, V.35, and X.21, which can be configured to operate at n x 56/64 kbps fractional data rates. With a Campus-RS FLEX installed within a private enterprise network, users can be provided with instant access to advanced digital services including LAN interconnectivity, video conferencing, and PBX extensions all while using the existing copper infrastructure. With Campus-RS FLEX, many of the networking needs of the private enterprise can be satisfied without the need for multiple WAN connections. Interface-specific settings can be accessed and configured from the front panel of the Campus-RS remote or Star concentrator and SNMP- based management is enabled via the Campus-RS Star CMU (Campus Management Unit). Features: • Supports voice, data and video applications • Enhances incoming T1 circuits • Interoperable with standard network equipment • Simple installation and configuration Multiport Data/Voice Interface Module Specifications Hardware Requires Campus-RS remote or Campus-RS Star line unit SDSL WAN Physical Interface: RJ-48C Interface Signal Format: full-duplex 2B1Q line code, 130.7 to 2352 kbps per loop, 1 or 2 loops, selectable Payload Data Rate: One loop: 128 kbps to 768 kbps, in 64 kbps increments Two loops: 256 kbps to 1.544 Mbps, in 128 kbps increments Network Data Port: Transmit data, transmit timing, receive data, receive timing, Interface external timing, eight control lines Data rate: n x 56/64 kbps (56 kbps to 1536 kbps) Physical Interface: mini-SCSI, 26-pin high-density (conversion cables are required to V.35, RS-449 or RS-530) Clock Options: Selectable from internal clock, SDSL signal data port DSX-1: Input: 0 to -7.5 dB Output Line Build Out: selectable from 0 to 655 ft. in five steps Clock Rate: 1.544 Mbps Framing: ESF/SF (fractional) n x 56/64 kbps Line Coding: AMI, B8ZS Impedance: 100 Ω Physical Interface: RJ-48C Management RS-232C/RJ-45 console port (9600, 8/N/1) & Maintenance Chassis LCD and switches Alarm and status LEDs Power Input AC: 110 VAC@60 Hz or 220 VAC@50–60 Hz, 8W DC: -18 to -72 VDC Environmental Operating Temperature: 0 to 50°C Relative Humidity: 0 to 85% Electromagnetic Emissions: FCC Part 15 Class A, CE Safety Compliance: UL, CSA, CE ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. 100004EC 01/02 Original © 2000 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292 For a complete listing of ADC's global sales office locations, please refer to our web site. Figure 2: Campus-RS FLEX Reach Profile (based on 10 -10 BER) 5/8.5 – 4/6.4 – 3/4.8 – 2/3.2 – 1/1.6 – 19 0.91 mm 26 0.40 mm 24 0.51 mm 22 0.61 mm ESTIMATED RANGE (MILES/ KILOMETERS) WIRE GAUGE T1 SDSL 1.544 Mbps Data Port Data Port DSX-1 Video PBX LAN Data Port Data Port DSX-1 Video PBX LAN Campus-RS Remote with Campus-RS FLEX Module Campus-RS Remote with Campus-RS FLEX Module Description Campus-RS Remote Campus-RS FLEX Interface Module HD to V.35 female Adapter Cable HD to RS-530 female Adapter Cable HD to RS-449 female Adapter Cable Catalog Number 150-1158-51/52* 150-1173-51 150-1056-03 150-1057-03 150-1058-03 Ordering Information Dimensions (H x W x D) 2.0 x 7.4 x 9.4 in. (5.1 x 18.8 x 23.9 cm) N/A 12 in. 12 in. 12 in. *Catalog number depends on power supply: 51 - internal 100-240 VAC power supply; 52 - internal -48 VDC power supply. Figure 1: Campus-RS FLEX Application . configuration Multiport Data/Voice Interface Module Specifications Hardware Requires Campus-RS remote or Campus-RS Star line unit SDSL WAN Physical Interface: . Campus-RS™ FLEX is an interface module that installs directly into a Campus-RS remote or Campus-RS Star concentrator and provides a multiport local interface capable