2010 firmware upgrade instruction for LCD TV t VALAUSC

2010 Samsung TV F/W Upgrade Guide Samsung Electronics Model List LCD series : LN40C560J2F series : LN32C650L1F, LN37C650L1F, LN40C650L1F, LN40C670M1F LN46C650L1F, LN46C670M1F, LN55C650L1F series : LN46C750R2F, LN55C750R2F LED 6000 series : UN32C6500VF, UN40C6400RF, UN40C6500VF, UN46C6400RF, UN46C6500VF, UN46C6800UF, UN46C6900VF, UN55C6400RF, UN55C6500VF, UN55C6800UF, UN55C6900VF, UN60C6400RF, UN60C6400SF, UN65C6500VF 7000 series : UN40C7000WF, UN46C7000WF, UN46C7100WF, UN55C7000WF, UN55C7100WF 8000 series : UN46C8000XF, UN55C8000XF, UN65C8000XF Step1 How to prepare the USB Memory Drive Save the firmware file onto your computer File Name : T-VALAUSC exe Connect the USB Memory Drive to the USB port of your PC Copy the file onto the USB Memory Drive Go to the USB Memory Drive and then double click the file Click on the “Unzip” button Unzipping is in progress After completing, click on the A folder containing the firmware files “OK” and “Close” buttons has been added to the USB memory drive Folder name : T-VALAUSC Safely disconnect the USB memory drive OK by right clicking the green check mark on the taskbar and then left click “Safely Remove” Step2 How to upgrade the firmware [Step 1] Turn the TV on [Step 6] Then, the message “Upgrade Version XXXX to version XXXX? [Step 2] Insert the USB Memory Drive The system will be reset after containing the Software into the USB port upgrade.” is displayed on the side (or rear) of the TV Select “Yes”, then press the ENTER button And then software is upgraded automatically [Step 3] Press the MENU button to display the menu Press the ▲ or ▼ button to select “Support”, then press the [Step 7] When the Software upgrade ENTER button is complete; the TV will turn off and then back on by itself [Step 4] Press the ▲ or ▼ button to select “Software Upgrade”, then press the ENTER button [Step 5] The message “Scanning for USB It may take up to 30 seconds” is displayed