Ô tô Camry 3.5Q - Phần 1 Phần 1 (Tài liệu bằng tiếng anh) gồm: - Kết cấu thân xe - Kết cấu phần điện - CHASSIS - Kích thước xe - Động cơ xe
EGENGINE – 2GR-FE ENGINE285EG01285EG02EG-612GR-FE ENGINEJDESCRIPTIONThe 2GR-FE engine on the new Camry is a newly developed, V6 3.5-liter, 24-valve DOHC engine. Thisengine uses the Dual VVT-i (Dual Variable Valve Timing-intelligent) system, DIS (Direct Ignition System),ACIS (Acoustic Control Induction System), and ETCS-i (Electronic Throttle Control System-intelligent).These control functions achieve improved engine performance, fuel economy, and reduced exhaustemissions. ENGINE – 2GR-FE ENGINEEG-62" Engine Specifications ANo. of Cyls. & Arrangement 6-Cylinder, V TypeValve Mechanism24-Valve DOHC, Chain Drive(with Dual VVT-i)Combustion Chamber Pentroof TypeManifolds Parallel-FlowFuel System EFIIgnition System DISDisplacement cm3 (cu. in.) 3456 (210.9)Bore x Stroke mm (in.) 94.0 x 83.0 (3.70 x 3.27)Compression Ratio 10.8 : 1Max OutputEEC 204 kW @ 6200 rpm*2Max. OutputSAE-NET 200 kW @ 6200 rpm*3Max TorqueEEC 346 N.m @ 4700 rpm*2Max. TorqueSAE-NET 336 N.m @ 4700 rpm*3IntakeOpen –3_ to 37_ BTDCValve TimingIntakeClose 71_ to 31_ ABDCValve TimingExhaustOpen 60_ to 25_ BBDCExhaustClose 4_ to 39_ ATD CFiring Order 1 – 2 – 3 – 4 – 5 – 6Oil GradeAPI grade SL “Energy-Conserving”,SM “Energy-Conserving” or ILSACResearch Octane Number95 or higher*4Research Octane Number91 or higher*5Taiwan Tier 1EmissionRegulationVietnamPhilippinesIndonesiaEURO IIRegulationThailandEURO IIIAustraliaG. C. C. CountriesEURO IVEngine Service Mass*1 (Reference) kg (lb) 163 (359)*1: Weight shows the figure with the oil and engine coolant fully filled.*2: Taiwanese, Vietnamese, Philippine, Indonesian, Thai and Australian models*3: G. C. C. Countries models*4: Taiwanese models*5: Vietnamese, Philippine, Indonesian, Thai, Australian and G. C. C. Countries models EGENGINE – 2GR-FE ENGINE285EG0337_3_TDC4_Intake VVT-i Operation RangeExhaust VVT-i OperationRange39_60_Exhaust VVT-i Operation Range25_BDC31_Intake VVT-i Operation Range71_: Intake Valve Opening Angle: Exhaust Valve Opening AngleEG-63" Valve Timing A . 6200 rpm*3Max TorqueEEC 34 6 N.m @ 4700 rpm*2Max. TorqueSAE-NET 33 6 N.m @ 4700 rpm*3IntakeOpen 3_ to 37 _ BTDCValve TimingIntakeClose 71_ to 31 _ ABDCValve. ENGINE285EG 033 7 _3_ TDC4_Intake VVT-i Operation RangeExhaust VVT-i OperationRange39_60_Exhaust VVT-i Operation Range25_BDC 31_ Intake VVT-i Operation Range 71_ : Intake