Tài liệu sửa chữa xe ô tô Renault 19 (Repair Manual) Chassis, Heating and ventilation, Sheet metal work, Sealing and Soundproofing, Trim and Upholstery
Trim and Upholstery GENERAL BODY INTERIOR TRIM SIDE OPENING ELEMENTS TRIM TRIM FOR OPENING ELEMENTS (OTHER THAN SIDE) REAR SHELVES FRONT SEAT FRAMES AND SEAT RUNNERS REAR SEAT FRAMES ANDSEAT RUNNERS FRONT SEAT TRIM REAR SEAT TRIM SEAT FITTINGS 77 11 190 895 NOVEMBER 1996 "The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared The methods may be modified as a result of changes by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed" C Edition Anglaise All copyrights reserved by Renault Copying or translating, in part or in full, of this document or use of the service part reference numbering system is forbidden without the prior written authority of Renault Renault S.A 1996 EXPLODED VIEW PRC70.3 Trim Contents Pages 70 GENERAL Pages 73 TRIM FOR OPENING ELEMENTS (OTHER THAN SIDE) A Tooling and products 70-1 71 BODY INTERNAL TRIM A B C D E F F F G Front and rear door handles Interior trim fastenings on body side Centre pillar upper trim Front, centre and rear pillar lower trim Front pillar upper trim Rear quarter panel trim Rear section lower trim (saloon) Rear quarter panel trim (cabriolet) Sill Panel - Seat belts 71-1 71-2 71-3 A B C D E F G Bonnet trim Tailgate trim Hood exterior trim (cabriolet) Padding (cabriolet) Hood interior trim (cabriolet) Changing the hood bonded rear screen (cabriolet) Changing the hood rear screen secured by zip fastener (cabriolet) 73-1 73-1 73-2 73-7 73-9 73-13 73-20 71-4 71-5 71-5 71-6 71-7 71-8 74 REAR SHELVES A B C Side shelf Side shelf (utility version) Shelf trim (saloon) 74-1 74-2 74-3 72 SIDE OPENING ELEMENTS TRIM A B B B C Door storage compartment Front door trim Front door trim (phase II) Front door trim (cabriolet) Rear door trim 75 FRONT SEAT FRAMES AND 72-1 72-2 72-3 72-5 72-6 SEAT RUNNERS A B C D Complete seat Seat frame Seat runners Seatback frame 75-1 75-3 75-4 75-5 Contents (cont.) Pages 76 REAR SEAT FRAMES AND SEAT RUNNERS A B Complete seatback Seatback frame 76-1 76-1 77 FRONT SEAT TRIM A B Seat trim Seatback trim 77-1 77-3 78 REAR SEAT TRIM A B B C C Rear bench seat frame Seat trim Seat trim (cabriolet) Seatback trim Seatback trim (cabriolet) 78-1 78-2 78-3 78-4 78-5 79 SEAT FITTINGS A B B Head restraint trim Ski flaps (cabriolet) Rear head restraints (cabriolet) 79-1 79-2 79-2 D 53 CABRIOLET GENERAL Tooling and products 70 A 94791S - Stapler tool Type : NAUDER* and stainless steel clips - Rivets Part number : 77 03 072 280 - Neoprene adhesive - Brush - Seal Part number: * NAUDER : Please contact your local After Sales Head Office for details 70-1 BODY INTERIOR TRIM Front and rear door handles 92260R REMOVAL Insert a flat screwdriver in hole (2) in the upper section, so that the first part of the handle can be levered away and unhooked 92261R The handle is held by two screws (3) 71-1 71 A BODY INTERIOR TRIM Interior trim fastenings on body side 71 B PRF7101 90230R1 90231R (A) Snap fastening (C) Snap fastening NOTE : If the dashboard is in place there is a risk of fastenings (A) ), (B), (C) and (D) breaking on removal For reasons of quality, it is preferable to change them, even if they can be re-used 71-2 BODY INTERNALIOR TRIM Centre pillar upper trim 71 C REMOVING THE UPPER TRIM (1) Unpick the upper section then free the seals by pulling it away 92339G Remove: - the seat belt mounting from the centre pillar, - the seat belt height adjustment pushrod (component in two sections) 92340R Remove the sliding cover from the adjustable mounting 71-3 BODY INTERIOR TRIM Front, centre and rear pillar lower trim 71 D PRF7102 Remove: - the upper trim from the centre pillar (1) see section 71 B - the mounting screws, - the lower seat belt mounting By hand, free the rear part of the trim from the surrounding seal and remove clips (B) Proceed in the same way for the front part of the trim Take out the trim through the rear door aperture 71-4 BODY INTERIOR TRIM Front pillar upper trim 71 E Remove: - the upper trim (1) from the centre pillar, - the mounting screw, - unpick the trim by pulling section (F) straight downwards then backwards PRF7103 Rear quarter panel trim 71 F Remove (see exploded view in section 71 B) : - trims (1), (2), (6) and (7) , - the seal from the luggage compartment aperture frame, - the side shelf which is held by screws, - the two upper screws from the quarter panel trim Unpick the trim (2 clips (C)) then remove the trim, starting at the door seal end PRF7104 71-5 ... fastener (cabriolet) 7 3-1 7 3-1 7 3-2 7 3-7 7 3-9 7 3-1 3 7 3-2 0 7 1-4 7 1-5 7 1-5 7 1-6 7 1-7 7 1-8 74 REAR SHELVES A B C Side shelf Side shelf (utility version) Shelf trim (saloon) 7 4-1 7 4-2 7 4-3 72 SIDE OPENING... Rear door trim 75 FRONT SEAT FRAMES AND 7 2-1 7 2-2 7 2-3 7 2-5 7 2-6 SEAT RUNNERS A B C D Complete seat Seat frame Seat runners Seatback frame 7 5-1 7 5-3 7 5-4 7 5-5 Contents (cont.) Pages 76 REAR SEAT... 7 8-2 7 8-3 7 8-4 7 8-5 79 SEAT FITTINGS A B B Head restraint trim Ski flaps (cabriolet) Rear head restraints (cabriolet) 7 9-1 7 9-2 7 9-2 D 53 CABRIOLET GENERAL Tooling and products 70 A 94791S -