1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Giáo trình công nghệ chi tiết sử dụng ắc QUY viễn thông dạng gel CG12 200SL

2 54 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

CG12-200SL Gel battery shows some distinctive advantages over flooded battery or AGM battery, such as super thermal stability, high deep discharge capability, good recovery from deep discharge , even if the battery is left discharged for three days, it will recover to 100% of capacity With the above-mentioned advantages, the gel battery has long service life, specially suitable for motive power applications, such as golf trailer, sruubber, folklift,etc.The deep discharge cycles increased 50% as compared with the AGM battery Battery Construction Component Positive plate Negative plate Container Cover Safety valve Terminal Raw material Lead dioxide Lead ABS ABS Rubber Copper General Features ● Nanometer SiO and H SO gelled electrolyte technology for efficiency gas recombination of up to 99% and freedom from electrolyte maintenance or water adding ● Not restricted for air transport-complies with IATA/ICAO Special Provision A67 ● UL-recognized component ● Can be mounted in any orientation ● Computer designed lead, calcium tin alloy grid for high power density ● Long service life, float or cyclic applications ● Maintenance-free operation ● Low self discharge ● Case and cover avaiable in both standard and flame restardant ABS Dimensions and Weight Length(mm / inch) Width(mm / inch) Height(mm / inch) Total Height(mm / inch) Approx Weight(Kg / lbs) 522 / 20.55 238 / 9.37 218 / 8.58 223 / 8.78 63.3 / 139.89 Separator PE Electrolyte Gelled acid Performance Characteristics Nominal Voltage Number of cell Design Life Nominal Capacity 77oF(25oC) 12V 12 years 10 hour rate (21A, 10.8V) 210Ah hour rate (40.2A, 10.5V) 201Ah hour rate (137A, 9.6V) 137Ah Internal Resistance 2.88mOhms Fully Charged battery 77oF(25oC) Self-Discharge 2% of capacity declined per month at 20oC(average) Operating Temperature Range Discharge -20~60oC Charge -10~60oC Storage -20~60oC 1000A(5s) Max Discharge Current 77oF(25oC) Short Circuit Current 3500A Charge Methods: Constant Voltage Charge Cycle use Maximum charging current Temperature compensation Standby use No charge current limit is required Temperature compensation 77oF(25oC) 2.40-2.45VPC 54.0A -20mV/oC 2.20-2.27VPC -30mV/oC Discharge Constant Current (Amperes at 77oF25oC) End Point Volts/Cell 1.60V 1.65V 1.70V 1.75V 1.80V 1.85V 10min 15min 30min 1h 381 358 338 312 287 280 309 290 276 253 234 230 195 191 188 172 160 155 137 136 134 131 123 116 3h 5h 10h 20h 51.9 51.0 48.7 46.3 45.3 45.0 43.5 42.9 41.1 40.2 37.8 35.4 25.9 24.7 22.8 22.3 21.0 19.6 9.78 9.67 9.57 9.50 9.41 9.31 Discharge Constant Power (Watts at 77oF25oC) End Point Volts/Cell 1.60V 1.65V 1.70V 1.75V 1.80V 10min 15min 30min 45min 1h 665 634 608 569 532 550 524 507 471 443 377 360 349 323 306 272 265 259 254 250 221 212 209 202 200 2h 3h 5h 133 130 126 123 121 106 102 98 94 91 67.1 65.2 64.5 63.2 62.3 (Note)The above characteristics data are average values obtained within three charge/discharge cycles not the mimimum values www.vision-tech.vn page1 of CG12-200SL Discharge characteristic (25O C) Constant voltage charging o characteristic (0.30CA,25 C) Battery voltage(V) CHARGED VOLUME 46.3A 309A 37.8A 21A 9.41A CHARGE VOLTAGE 195A 115A CHARGE CURRENT Discharge time Self-discharge characteristic 110 (V/CELL) 100 15.6 10.4 7.8 5.2 2.6 15.0 10.0 7.5 5.0 2.5 Capacity(%) (V/6V) (V/4V) (V/8V) (V/12V) Relationship between charging voltage and temperature 90 80 70 14.4 9.6 7.2 4.8 2.4 13.8 9.2 6.9 4.6 2.3 60 13.2 8.8 6.6 4.4 2.2 50 -10 10 20 30 40 50 40 60 Ambient temperature(o C) 12 15 18 21 Storage time: months 24 30 Cycle service life in relation to depth of discharge Capacity(%) Life characteristics of Standby use 50% Depth of discharge Life(year) Number of cycles(cycles) Temperature effects on float life Temperature effects on capacity 15 2.27V/Cell Capacity (%) Life(years) 27 12 10 20 30 40 50 Temperature( o C) THE INTERNATIONAL CE RTIFICATION NETWORK ISO9001:2000 MH25860 G4M19906-9202-E-16 www.vision-tech.vn Shenzhen Center Power Tech Co., Ltd Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com Co py Rig ht S h enzh en Ce nt er P ow er Te chn olo gy Co., Lt d (E d it i on 20 12-11 ) Page of .. .CG12- 200SL Discharge characteristic (25O C) Constant voltage charging o characteristic (0.30CA,25... Co., Ltd Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail: sales@vision-batt.com Co py Rig

Ngày đăng: 23/04/2019, 21:16

Xem thêm:

TỪ KHÓA LIÊN QUAN