Training máy đào komatsu pc1250-7

Cab & Operator Environment.ppt Electronic Control Systems.ppt Electronics Control System – Monitors Recap.ppt Hydraulics.ppt Improved_CSS.ppt Introduction.ppt Mechanicals Power Trainand Structures.PPT Technical Presentation Kit.ppt Monitor Panel

Mode Select

Active

Economy

Lifting

Breaker

Service Function

Auto Decel

Return Page Up / Down

Select switch

Display Service meter / clock.

Coolant / Hyd oil temperature Fuel level

Service Meter

Travel mode selected

Mode Select

Active

Economy

Heavy Lift

Swing Accel

Service Function

Auto Decel

Return Page Up / Down

Select switch

Display Service meter / clock.

Coolant / Hyd oil temperature Fuel level

Working mode

Service Meter

displayed on the liquid crystal monitor in front of the operator's seat

Abnormality Check Function

Oil pressure, engine speed, etc can be displayed on the liquid crystal

monitor

Abnormality Display Check Function

The machine indicates replacement time out of maintenance items on the liquid crystal monitor

Maintenance Mode

Selection with

maintenance switch

Indicates replacement time

Item/Time setting and Maintenance record shows history on all filters.

Abnormality Display Function

Abnormality Check Function

The liquid crystal monitor in front

of the operator's seat displays the

engine oil level, coolant level, fuel

level, engine oil temperature,

engine oil pressure, battery

charge level, air cleaner

condition, etc

This monitor enables to easily

check if oil pressure, solenoid

ON/OFF, disconnection, engine

speed, current value, etc and

normally functioning Also, it can

minimize machine down time in

case of an emergency

This monitor displays replacing timings of maintenance items

Memory of Operating Situations

This machine memorizes engine output, oil pressure and operation of the work equipment and utilizes them for inspection and

maintenance

Memory of failure codes

This machine memorizes any failures once occurred and keeps the record for inspection and maintenance

Monitor Display

Input a maximum of 4 x 3 digit codes of the functions you

wish to monitor from the menu (Pump pressure, F or R

pump, PC EPC solenoid, etc)

Bit codes have been replaced with descriptions.

Hold function

Monitor display readings can be held by depressing the scroll

up key on the keypad.

CAB & OPERATOR ENVIRONMENT

SECTION

END

CAB & OPERATOR ENVIRONMENT

SECTION