Cách mở Add in Pipe and Tube trong Inventor

Cách mở Add in Pipe and Tube trong Inventor Cách mở Add in Pipe and Tube trong Inventor Cách mở Add in Pipe and Tube trong Inventor Cách mở Add in Pipe and Tube trong Inventor Cách mở Add in Pipe and Tube trong Inventor Cách mở Add in Pipe and Tube trong Inventor

Activating Tube & Pipe after opening an assembly hangs Inventor 2014 Issue: Users reported that after launching Inventor 2014 • if an existing assembly (without tube and pipe elements) is opened • then entering in Tube and Pipe environnement • Inventor can hang Note: generally this incident is visible when: • opening migrated assemblies • using localization releases of Inventor (like french or german) • using Inventor 2014 Solution: Status: This incident has been resolved in Autodesk Inventor Professional 2015 Incident ID: 30871 Workaround Option 1: • Generating a system variable can solve the problem: • Variable name: DYNAMIC_LOAD_APPLETS • Variable value: => Control Panel >> System and Security >> System >> Advanced System Settings Workaround Option 2: Lauch Inventor >> Generate new assembly >> Environment >> Tube and Pipe >> OK => Tube and Pipe environment opens Close assembly Open problematic assembly >> Environment >> Tube and Pipe >> OK => Tube and Pipe environment should have been now loaded successfully  ... Panel >> System and Security >> System >> Advanced System Settings Workaround Option 2: Lauch Inventor >> Generate new assembly >> Environment >> Tube and Pipe >> OK => Tube and Pipe environment... Pipe environment opens Close assembly Open problematic assembly >> Environment >> Tube and Pipe >> OK => Tube and Pipe environment should have been now loaded successfully