1.1 This practice covers sampling of coarse and fine aggregates for the following purposes: 1.1.1 Preliminary investigation of the potential source of supply, 1.1.2 Control of the product at the source of supply, 1.1.3 Control of the operations at the site of use, and 1.1.4 Acceptance or rejection of the materials.
Standard Method of Test for Sampling of Aggregates AASHTO Designation: T 2-91 (2015) ASTM Designation: D75-03 American Association of State Highway and Transportation Officials 444 North Capitol Street N.W., Suite 249 Washington, D.C 20001 © 2015 by the American Association of State Highway and Transportation Officials All rights reserved Duplication is a violation of applicable law Standard Method of Test for Sampling of Aggregates AASHTO Designation: T 2-91 (2015) ASTM Designation: D75-03 AASHTO T 2-91 (2015) is identical to ASTM D75-03 except that all references to ASTM C702 contained in ASTM D75-03 shall be replaced with T 248 in T TS-1c T 2-1 © 2015 by the American Association of State Highway and Transportation Officials All rights reserved Duplication is a violation of applicable law AASHTO ...Standard Method of Test for Sampling of Aggregates AASHTO Designation: T 2-91 (2015) ASTM Designation: D75-03 AASHTO T 2-91 (2015) is identical to ASTM D75-03 except that all references... Highway and Transportation Officials All rights reserved Duplication is a violation of applicable law AASHTO