Vehicle crash mechanics

Tài liệu tham khảo

Loại

Chi tiết

1. Juvinall, R.C., “Stress, Strain, and Strength,” McGraw Hill, 1967. pp. 170,171, 175

Sách, tạp chí

Tiêu đề:	Stress, Strain, and Strength

2. Spotts, M.F., “Impact Stress in Elastic Bodies Calculated by the Energy Method,” from “Spring Design and Application,” Edited by N.P. Chironis, Product Engineering, McGraw-Hill Co., 1961

Sách, tạp chí

Tiêu đề:	Impact Stress in Elastic Bodies Calculated by the Energy Method,” from “SpringDesign and Application

3. Prasad, A. K., “Coefficient of Restitution of Vehicle Structures and its Use in Estimating the Total V in Automobile Collisions,” pp.217–246, Crashworthiness and Occupant Protection in Transportation Systems, 1991 ASME Winter Annual Meeting

Sách, tạp chí

Tiêu đề:	Coefficient of Restitution of Vehicle Structures and its Use in Estimating theTotal V in Automobile Collisions

4. “Characterization and Dynamic Testing of Utility Vehicles, Volume 1 — Executive Summary, Volume 2 — Vehicle Characterization Tests, Volume 3 — Vehicle Dynamic Tests,” Report No:FaAA-AZ-R-89-4-2, Failure Analysis Associates, April, 1993

Sách, tạp chí

Tiêu đề:	Characterization and Dynamic Testing of Utility Vehicles, Volume 1 — Executive Summary,Volume 2 — Vehicle Characterization Tests, Volume 3 — Vehicle Dynamic Tests

5. Gillespie, T.D., “Fundamentals of Vehicle Dynamics,” Published by Society of Automotive Engineers, Inc., 1992

Sách, tạp chí

Tiêu đề:	Fundamentals of Vehicle Dynamics

6. Chou, C. C., and Amin, M., “A Review of the State of the Art of Angular Rate Sensors,” SAE Paper No. 2000-01-2668, Society of Automotive Engineers, 2000

Sách, tạp chí

Tiêu đề:	A Review of the State of the Art of Angular Rate Sensors

Định dạng
Số trang	489
Dung lượng	25,28 MB