1. Trang chủ
  2. Giáo án - Bài giảng

Tiêu chuẩn piping ASME b31 1 2010

352 527 10
Tiêu chuẩn piping ASME b31 1 2010

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

... 11 2 12 4 13 4 16 4 17 6 17 8 18 2 19 0 19 6 200 206 210 214 215 216 218 220 224 225 226 227 2 31 237 238 10 4 .1. 2(A) 11 2 11 4.2 .1 1 21. 5 12 1.7.2(A) 12 2.2 12 2.8.2(B) 12 6 .1 127.4.2 12 9.3 .1 132 13 2 .1 136.4... 10 8 10 8 10 8 10 8 10 9 Figures 10 0 .1. 2(A .1) 10 0 .1. 2(A.2) 10 0 .1. 2(B) 10 0 .1. 2(C) 10 2.4.5 10 4.3 .1( D) 10 4.3 .1( G) 10 4.5.3 10 4.8.4 12 2 .1. 7(C) 12 2.4 12 7.3 12 7.4.2 12 7.4.4(A) 12 7.4.4(B) 12 7.4.4(C) 12 7.4.8(A)... 1 Chapter II Part 10 1 10 2 Part 10 3 10 4 Part 10 5 10 6 10 7 10 8 Part 11 0 11 1 11 2 11 3 11 4 11 5 11 6 11 7 11 8 Part 11 9 12 0 12 1 Part 12 2 Design

Ngày đăng: 09/09/2018, 16:35

Xem thêm: Tiêu chuẩn piping ASME b31 1 2010, 112 Piping Flange Bolting, Facing, and Gasket Requirements (Refer to Paras. 108, 110, and 112), 2 Design Pressure for Blowoff/Blowdown Piping Downstreamof BEP Valves, Fig. D-1 Branch Connection Dimensions, CASE 176 Use of 20Cr– 18Ni– 6Mo ( UNS S31254) for ASME B31.1 Constructions, CASE 183 Use of Seamless 9Cr– 2W in ASME B31.1 Construction

Từ khóa liên quan

Mục lục

  • CONTENTS

  • FOREWORD

  • COMMITTEE ROSTERS

  • INTRODUCTION

  • SUMMARY OF CHANGES

  • Chapter I Scope and Definitions

    • 100 GENERAL

    • Chapter II Design

      • PART 1 CONDITIONS AND CRITERIA

        • 101 DESIGN CONDITIONS

        • 102 DESIGN CRITERIA

        • PART 2 PRESSURE DESIGN OF PIPING COMPONENTS

          • 103 CRITERIA FOR PRESSURE DESIGN OF PIPING COMPONENTS

          • 104 PRESSURE DESIGN OF COMPONENTS

          • PART 3 SELECTION AND LIMITATIONS OF PIPING COMPONENTS

            • 105 PIPE

            • 106 FITTINGS, BENDS, AND INTERSECTIONS

            • 107 VALVES

            • 108 PIPE FLANGES, BLANKS, FLANGE FACINGS, GASKETS, AND BOLTING

            • PART 4 SELECTION AND LIMITATIONS OF PIPING JOINTS

              • 110 PIPING JOINTS

              • 111 WELDED JOINTS

              • 112 FLANGED JOINTS

              • 113 EXPANDED OR ROLLED JOINTS

              • 114 THREADED JOINTS

              • 115 FLARED, FLARELESS, AND COMPRESSION JOINTS, AND UNIONS

Tài liệu cùng người dùng

Tài liệu liên quan