TAM inflatable bridge plugs

TAM Inflatable Bridge Plugs and Cement Retainers Advantages: • Runs in small - sets large • Reliable anchoring in casing or open hole • Ideal for applications where mechanical packers cannot be set ISO 9001: 2000 TAM_IBP_Cement.indd 8/27/09 11:06:29 PM TAMPLUGTM Permanent Bridge Plugs and Permanent Cement Retainers TAM inflatable Cement Retainers and TAMPLUG permanent inflatable bridge plugs can be set in either open hole or casing and can expand up to times their run-in diameter Both can be run in on drill pipe or tubing and are inflated with fluid or gas by applying surface pressure Both tools feature a 100% reinforced exposed steel slat inflatable element for optimum anchoring ability in casing or open hole The difference between each tool is that the TAM Cement Retainer allows the operator to cement through the tool, and the TAMPLUG is strictly a bridge plug With the high expansion ratio inflatable element, the TAMPLUG and TAM Cement Retainer are excellent choices where conventional mechanical tools will not work, such as restricted inside diameters or open hole The standard seal length is ft (.91 M) with optional 10 ft (3.04 M) or 20 ft (6.1 M) seal length Retrievable Running Sub Check Valve Inflation Port Sliding Sleeve Shear Pin Valve Assembly Sliding Sleeve Inflation Port Circulating Port Choke Shear Pin Check Valve Steel Reinforced Element TAM Permanent Cement Retainer TAM permanent Cement Retainers are designed for simple operation and reliable anchoring It is ideal for squeeze cementing operations Utilizing a unique sliding sleeve setting mechanism, TAM Cement Retainers not rely upon check valves to set and maintain element pressure Exposed Steel Slats TAMPLUG Permanent Bridge Plug The TAMPLUG is an inflatable open hole bridge plug used to support cement plugs It can also be used to plug back above water production or lost circulation zones TAMPLUGs are often used as the packer for an open hole whipstock Guide Nose TAMPLUG TAM_IBP_Cement.indd TAM Cement Retainer 8/27/09 11:06:40 PM Cement Retainer Operation Ordering Information Ordering StandardInformation elastomers for TAMPLUGs and TAM Cement Retainers are Standard elastomers for TAMPLUGs and TAM Cementare Retainers rated rated toInformation 275˚F (135˚C); higher temperature elastomers availableare upon Ordering to 250˚F (121˚C); higher temperature elastomers are available upon request Cement Retainer The TAM Cement Retainer is inflated Operation by circulating a ball to the tool Pump Cement Retainer TAM Cement The pressure is then applied to Retainer inflate theis Operation by circulating ball to the inflated element ballCement activatesRetainer a asliding TAM is TheThe tool Pump pressure is then applied sleeve that traps the inflationapressure in by circulating ball to the inflated The ball activates a sliding sleeve tool Pump pressure is thenisapplied the element Additional pressure then that traps the inflation pressure in Thetoball activates aand sliding sleeve applied expel the ball ball choke the element Additional pressure is that the traps the inflation pressure in through tool then applied to expel the ball and request When ordering, please specify: Standard elastomers for TAMPLUGs and TAM Cement Retainers are rated When ordering, please specify: to 250˚F (121˚C); higher temperature elastomers are available upon request • TAMPlug or Cement When ordering, please specify: Retainer • TAM• Work PlugString or Cement Retainer Connection Work String Connection ••TAM or Cement Retainer •Plug Minimum Restriction Above Setting Depth • Minimum Restriction • Work• String Connection I.D at Setting Depth Above Setting Depth I.D •atTemperature Setting Depth ••Minimum Restriction Above at Setting Depth Setting Depth Temperature at Setting Depth ••I.D at• Differential Setting Depth Pressures Differential Pressures ••Temperature at Setting Depth3 ft or 10 ft • Inflation Element Seal Length ••Differential Pressures Inflation Element Seal Length ft or 10 Upon ft Request • Additional Seal Lengths up to 20 feet Available ••Inflation Element Length or 10 ft Additional Seal up to 320ft.feet Available Upon Request Contact TAM Lengths forSeal Details • Additional Sealfor Lengths up to 20 feet Available Upon Request Contact TAM Details Contact TAM for Details the element Additional pressure is ball choke through the tool then applied to take expelplace the ball and Cementing can then through Cementing can then take place ball choke through the tool the retainer An internal flapper valve/ through the retainer An internal Cementing canpossible then take place check valvevalve prevents back flow check prevents possible back through the retainer An internal flow When rotatevalve releasing from possible the retainer, the check prevents back When releasing from the retainer, flow internal prong of the running sub releases a When flapper valve shuts prevent fromto and allows thereleasing flapper valve tothe shutretainer, to further communication through a flapper valve shuts to prevent prevent further communication through the retainer Cement may then be further communication through the retainer Cementthe may then be placed placed above retainer the retainer Cement may then be above the retainer placed above the retainer TAMPLUG & Cement Retainer TAMPLUG Cement Ratings Retainer Working&Pressure &Ratings–Outside Cement RetainerDiameter Outside Diameter WorkingTAMPLUG Pressure Working Pressure Ratings TAMPLUG Operation The TAMPLUG is simple to run TAMPLUG Operation TAMPLUG Operation or byHydraulic hydraulic pressure Release with restricted For applications Hydraulic Release Hydraulic Release with restricted For applications rotation of the workstring or small rotation of the workstring small inside diameters, the TAMorhydraulic For inside applications with restricted of thewithout TAMrotation hydraulic releasediameters, disconnects rotation the work string or small inside diameters, release disconnectsAfter without rotation of the workstring the TAM the TAM release disconnects of thehydraulic workstring After the TAM is Cement Retainer or TAMPLUG Cement Retainer or TAMPLUG without of thehydraulic work string Afteris the set,rotation additional pressure set, additional hydraulic pressure the workstring TAMdisconnects Cement Retainer or TAMPLUG is set, disconnects workstring The TAM the hydraulic release works additional hydraulic pressure disconnects Thewith TAMcoil hydraulic release works or small diameter well the work string with coil or smalloperations diameter in well tubing and simplifies and simplifies operations in Thetubing TAM release works well with deephydraulic or highly deviated wells ordiameter highly deviated wells coil deep or small tubing and simplifies * See illustrations back cover operations in deep oronhighly deviated wells * See illustrations on back cover * See illustrations on back cover TAM_IBP_Cement.indd Outside Diameter 3⁄4 1⁄4 146 210 3⁄ 1⁄4 5⁄8 146 210 118 178 5⁄8 4000 178 (276 Bar)118 4000 (276 Bar) Maximum Differential Pressure, PSI Maximum Differential Pressure, PSI and does notisrequire Thealso TAMPLUG simple pipe to run Theand TAMPLUG is simple to run and also rotation to set Optional also does not require circulating pipe doesrotation not require pipe rotation tocirculating set ports allow theOptional workstring to fill to set during run-in The TAMPLUG Optional circulating ports allow the ports allow the workstring towork fillcan then set by circulating a ball string to fillbe during run-in The TAMPLUG during run-in The TAMPLUG canto the tool which closes the circulating be set set by circulating circulating ball can then then be by a aball to to the ports Surface pressure is then the tool which closes the circulating tool which closes the circulating ports applied Whenpressure the preset inflation ports Surface is then Surface pressure is then applied When pressure is achieved, a valve assemapplied When the preset inflation the preset inflation pressure is achieved, bly closes and locks the pressure pressure is achieved, a valve assemthe SafeLok valve assembly closes and in the inflation element bly closes and locks the pressure locksinthe pressure inelement theisinflation element The work string disconnected the inflation byThe applying six rounds of right-hand work string is disconnected The work string is disconnected by rotation or by by applying six hydraulic rounds of pressure right-hand applying six rounds of right-hand rotation rotation or by hydraulic pressure 11 1⁄4 286 11 1⁄4 286 15 3⁄4 400 15 3⁄4 400 inches mm inches mm 3000 (207 Bar) 3000 (207 Bar) 2000 (138 Bar) 2000 (138 Bar) 1000 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 inches (69 Bar) 120 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 600 625 650 mm 1000 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 inches (69 Bar) 120 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 600 625 650 mm Calipered Open Hole Size IMPORTANT: The suggested ratings shown theSize graph are not a measure of the Calipered Openon Hole packer's self-anchoring capability, which may be less than the suggested rated working IMPORTANT: The suggested ratings shown on the graph are not a measure of the pressure and may varyratings under certain circumstances Consult TAM International for IMPORTANT: suggested shown thebegraph are not measure of theworking packer’s packer'sThe self-anchoring capability, whichon may less than the asuggested rated details pressure capability, and may vary under circumstances Consult rated TAM International for self-anchoring which maycertain be less than the suggested working pressure and details may vary under certain circumstances Consult TAM International for details Part Number Part TAMNumber Cement TAMRetainer Cement Retainer10 ft Seal ft Seal 463-CR-01 ft Seal 425-CR-01 463-CR-01 575-CR-01 463-CR-01 575-CR-01 700-CR-01 575-CR-01 700-CR-01 825-CR-01 700-CR-01 825-CR-01 11-CR-01 825-CR-01 11-CR-01 15-CR-01 11-CR-01 15-CR-01 15-CR-01 10463-CR-02 ft Seal 463-CR-02 575-CR-02 463-CR-02 575-CR-02 700-CR-02 575-CR-02 700-CR-02 825-CR-02 700-CR-02 825-CR-02 11-CR-02 825-CR-02 11-CR-02 15-CR-02 11-CR-02 15-CR-02 15-CR-02 Part Number Part Number TAMPLUG TAMPLUG ft Seal 463-TP-01 ft Seal 463-TP-01 575-TP-01 463-TP-01 575-TP-01 700-TP-01 575-TP-01 700-TP-01 825-TP-01 700-TP-01 825-TP-01 11-TP-01 825-TP-01 11-TP-01 15-TP-01 11-TP-01 15-TP-01 15-TP-01 TAM Cement Retainer TAM Cement Retainer & TAMPLUG &run-in TAMPLUG diameter run-in diameter 10 ft Seal in mm 10463-TP-02 ft Seal 463-TP-02 575-TP-02 463-TP-02 575-TP-02 700-TP-02 575-TP-02 700-TP-02 825-TP-02 700-TP-02 825-TP-02 11-TP-02 825-TP-02 11-TP-02 15-TP-02 11-TP-02 15-TP-02 15-TP-02 in.4 5/8 45/5/8 16 3/4 55/3/4 73/4 1/4 81 1/4 11 /4 1/4 11 1/43/4 11 115 /4 15153/3/4 mm 118 109 118146 118 146 178 146 178 210 178 210 286 210 286 286400 400 400 8/27/09 11:06:42 PM CEMENT RETAINER Check Valve Shear Pin Pin Shears Sleeve Slides Sliding Sleeve Inflation Port Ball Shear Pin Choke Check Valve Inflation Port Closes Check Valve Closed Pin Shears Check Valve Closes after Squeeze Cementing Check Valve Closed Ball and Choke Expelled Run In Set Squeeze Cement Release TAMPLUG Circulating Port Run In Inflation Port Set 800.462.7617 713.462.7617 713.462.1536 Fax www.tamintl.com TAM_IBP_Cement.indd Ball SafeLok Valve Assembly Release Worldwide sales and service contacts at www.tamintl.com The information and/or data in this publication is supplied solely for informational purposes and TAM International makes no guarantees or warranties, either expressed or implied, with respect to its accuracy, completeness or use 8/27/09 11:06:46 PM ...TAMPLUGTM Permanent Bridge Plugs and Permanent Cement Retainers TAM inflatable Cement Retainers and TAMPLUG permanent inflatable bridge plugs can be set in either open... mechanism, TAM Cement Retainers not rely upon check valves to set and maintain element pressure Exposed Steel Slats TAMPLUG Permanent Bridge Plug The TAMPLUG is an inflatable open hole bridge plug... operator to cement through the tool, and the TAMPLUG is strictly a bridge plug With the high expansion ratio inflatable element, the TAMPLUG and TAM Cement Retainer are excellent choices where