Database of structural engineering software

50 276 0
Database of structural engineering software

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Database of structural engineering software The structural analysis program RFEM is the basis of a modular software system. The main program RFEM is used to define structures, materials, and loads for planar and spatial structural systems consisting of plates, walls, shells and members. The program also allows you to create combined structures as well as model solid and contact elements. RFEM provides deformations, internal forces, stresses, support forces, and soil contact stresses. The corresponding add-on modules facilitate data input by automatic generation of structures and connections or can be used to perform further analyses and designs according to various standards. The modular software concept allows you to compile a program package tailored to your individual needs. It is possible to upgrade the program at any time.

Database of Structural Engineering Software [ www.bridgeart.net ] Seite von 50 Database of Structural Engineering Software (BridgeArt.net) Database of software for structural analysis and design User contributed software ratings and comments Entries include software name, publisher details, price, license type, platform, ranking, etc Browse and search capabilities The goal of BridgeArt.net is to compile the most comprehensive online database of software for structural engineering It will enable practicing engineers, educators, students, researchers, software developers and others to compare available software tools and quickly locate the most suitable one for their need Full English Version 451 programs 253 authors 347 keywords ABAQUS BD3 BRASS 21 OOFEM 22 RISA ADINA R&D, Inc BridgeSoft, Inc 18 LARSA, Inc 19 Leap Software 20 OASYS Ltd AASHTO LRFD 15 eigenvalue 16 concrete column 17 footing, on piles 30 moving load Examples of Database Entries 2D Frame Analysis Dynamic Edition This application uses a highly flexible, general, finite element method for static and dynamic analysis of multi span beams, 2D trusses and 2D frames It features a versatile and easy interface as well as reliable finite element calculation library Keywords: 2D analysis; dynamics; eigenvalues; frame analysis; statics 2D3DSteel 2D3DSteel 2.1 is an AutoCAD VLX application that draws accurate steel shapes in AutoCAD 2000 through 2007 Any of the shapes available in ShapeBook can be quickly added, in 2D or 3D, to your AutoCAD drawings Keywords: steel detailing 3D+ Automated 2D and 3D drafting for structural engineers based on AutoCAD Enables to generate 2D drawings from 3D model Parametric capabilities Includes revision tool to track changes electronically Keywords: parametric drafting; revision tracking 4Projects 4Projects provides a comprehensive toolset for online collaboration, document control, information management Keywords: collaboration; document management; project management http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite von 50 AASHTOWare Family of software products developed, maintained and enhanced by AASHTO (American Association of State Highway Transportation Officials) and their affiliates under the Cooperative Computer Software Development activity These products then available for license to AASHTO member departments, educational institutions, and other private and public agencies The software suite includes: (1) AASHTO Trns*port management of pre-construction and construction contract information; (2) Pontis comprehensive bridge management system; (3) Virtis - bridge load rating; (4) Opis - bridge design; (5) DARWin - pavement analysis and design system; (6) SDMS - survey data management system; (7) TSIMS - transportation safety management system Keywords: bridge; bridge management; load rating ABAQUS General-purpose finite element analysis (FEA) program for linear, nonlinear, explicit and multi-body dynamics problems Keywords: FEA (finite element analysis); static linear analysis; static nonlinear analysis ABD-Automated Bridge Design Computer service for bridge designers using ABD bridge design software The software can handle several standard types of superstructures, substructures, and foundation types Submit your bridge design parameters and receive analysis and design report that can be directly used for detailing Keywords: footing, on piles; foundation; substructure bridge; superstructure bridge ABD-Loads Bridge loading software that calculates reactions, moment and shear envelopes for all standard AASHTO loadings and over 200 other predefined truck loadings Keywords: moving load ABD-Slab Bridge slab design software for beam/girder type bridges in accordance with the AASHTO LRFD code Keywords: LRFD (load and resistance factor design); slab 10 Abutment (by Fine) The program provides facilities to verify abutment design Abutment program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: abutment; substructure bridge 11 ACE Legacy software from 1977 to evaluate response of existing buildings to and earthquake motions Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ACE: Analysis of Critical Elements for the Seismic Evaluation of Existing Multistory Residential Buildings Pinkham, Clarkson W.; Hart, Gary C S.B Barnes & Associates, Los Angeles, California; J.H Wiggins Company, Redondo Beach, California, 1977, The response of an existing building to earthquake motions reflects the performance level inherent in the codes, standards, and construction practices in existence at the time of the design and construction of the building Deterioration and improper alteration during the service life of a building affect the actual margin of safety provided by the building Thus there is a need to evaluate the potential seismic hazard of existing buildings Following evaluation of the original structure, the effectiveness of appropriate strengthening or retrofit procedures may be determined A methodology is presented in the user documentation for evaluating the need to upgrade existing buildings by identifying items requiring strengthening or repair, and then by verifying the adequacy of rehabilitation This evaluation is given in terms of the behavior of the critical structural elements in a building The determination of this behavior requires an analysis of the structural response of the building to prescribed forces An analytical model of the building is defined with data collected from a field inspection of the building, original structural calculations and drawings, test records, and test of the existing building materials The 1973 edition of the Uniform Building Code (UBC73) serves as the basis for calculations made with the analytical model A building's description, plan dimensions, inertia and stiffness properties are input to the ACE program UBC73 earthquake loads are calculated either by (1) the UBC73 building period formulas and basic shear distribution equation, or by (2) the building period and/or fundamental mode distribution of base shear obtained from the detailed analytical model Member forces for user defined critical elements are calculated and used to find critcal stress ratios for these elements Among the critical building elements the user can consider are steel, reinforced or http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 12 13 14 15 Seite von 50 unreinforced masonry, and reinforced or unreinforced concrete Keywords: building; seismic analysis Aconex Aconex is online project management and collaboration solution for the construction, engineering and facilities management industries Keywords: collaboration; document management; project management ADAP Legacy software from 1973 for linear static and dynamic analysis of arch damfoundation systems Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ADAP: Static and Dynamic Analysis of Arch Dams Clough, Ray W.; Raphael, Jerome M.; Mojtahedi, Soheil Department of Civil Engineering, University of California, Berkeley, 1973, ADAP is a finite element program capable of performing linear static and dynamic analysis of arbitrary arch dam-foundation systems Most of the logical features and many of the subroutines of the computer program SAP are utilized in this program Special features primarily associated with preparation of input data are incorporated to make it more suitable for arch dam analysis Three different element types are included in the program; these are considered to be the most suitable in this application The program is organized in such as way that, if desired, new elements can be included easily A finite element mesh is automatically generated from a minimum amount of input information In each problem any one of the following types of analysis can be requested: (1) static analysis - the program is capable of handling an arbitrary combination of gravity, water pressure, and temperature loading conditions, and concentrated loads at any node; (2) evaluation of natural frequencies and mode shapes - if these are not available for input they are automatically evaluated as part of (3) or (4); (3) response history analysis - using a step-by-step integration scheme assuming the accelerations to vary linearly within each time step; and (4) response spectrum analysis - which results in estimated maximum values for displacements and stresses Keywords: dam; eigenvalue analysis; response spectrum analysis; static analysis; time history analysis ADAP88 Legacy software from 1992 for modeling and dynamic analysis of concrete arch dams Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ADAP-88: Nonlinear Earthquake Analysis of Concrete Arch Dams Mojtahedi, Soheil; Fenves, Gregory L.; Reimer, Richard B Department of Civil and Environmental Engineering, University of California, Berkeley, 1992, The modeling and dynamic analysis of concrete arch dams, the impounded water and foundation rock, is an important step in the earthquake safety evaluation of such systems A linear earthquake analysis assuming an arch dam is an elastic monolithic structure usually shows large tensile stresses that exceed the tensile strength of concrete Because arch dams are constructed as cantilever monoliths, the joints between the monoliths cannot develop the tensile stress predicted in a linear analysis In reality, the contraction joints are expected to open and close during an earthquake, releasing arch stresses and redistributing the internal forces ADAP-88 is a finite element analysis program for computing the earthquake response of arch dams including the nonlinear effect of contraction joint opening The nonlinear joint elements are combined with shell, solid and fluid finite elements to model a complete arch dam system Special consideration is given to resolving the stress distribution near the joints by using a refined mesh of solid elements A numerical procedure for solving the equations of motion assumes that the nonlinearity in the model is restricted to the joints The cantilever monoliths between contraction joints are modeled as linear substructures, resulting in a significant reduction of computation in the iterative solution of the nonlinear equations of motion ADAP-88 includes a finite element mesh generator for typical arch dam geometries The computer program RESVOR is used to compute the added mass for the water impounded in the reservoir, assuming the fluid is incompressible Keywords: dam; nonlinear; seismic analysis ADAPT-ABI Special-purpose program for the design and analysis of prestressed concrete bridges built either segmentally or conventionally It provides information for geometry and stress control during construction, as well as design values for service load Keywords: http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 16 17 18 19 20 21 22 23 24 Seite von 50 balanced cantilever bridge; box girder bridge; bridge; cable-stayed bridge; concrete; incrementally launched bridge; post-tensioned concrete; precast-prestressed girder bridge; prestressed concrete; prestressing relaxation; segmental bridge ADAPT-Floor Pro Program for analysis, design and investigation of slab systems: design of reinforced concrete slab systems; design of post-tensioned slab systems; import data from dxf, dwg files; import geometry and loads (lateral, gravity) from third parties (Etabs, Staad ,Revit); generates reinforcing drawings; analyzes existing slabs for capacity, use change; calculates cracked deformations; calculates floor vibration modes; export reinforcing/geometry to Revit Structure; analyzes complex slabs with steps; no limitations in the slab size; uses 3rd generation finite element analysis; 3D automated mesh generation (including walls, beam and columns) Keywords: 3D analysis; analysis; autocad; beam design; Building Information Modeling; concrete design; concrete reinforcement detailing; concrete reinforcement scheduling; crack; crack width; creep; design; detailing; FEA (finite element analysis); floor; grillage analysis; lateral design; prestressed concrete; reinforced concrete ADAPT-PT Standalone program for analysis and design of post-tensioned slab systems and beam frames: one-way and two-way slabs, flat slabs, slabs with drop panels, waffle slabs, joist slabs, beams (L, T, rectangular, I) Capabilities include: (1) support bonded and unbonded tendons; (2) calculation of short and long-term deflection; (3) calculation of stress losses (due to elastic shortening, creep and shrinkage); (4) considers base mild reinforcing; (5) support for several tendon profiles (reversed parabola, straight, harped, simple parabola, cantilever); (6) selection of tendon by force or number of strands; (7) checks for initial, sustained and full service stress conditions; (8) iterates to find and optimize solution The program is offered in two versions, a low cost version referred to as "Standard" and a "Plus" version The two programs are identical except that the Standard version is limited to spans and two cantilevers The Plus version goes up to 20 spans and two cantilevers Keywords: beam; concrete; post-tensioned concrete; tendon ADAPT-RC Program for the analysis, design and investigation of new and existing oneway, two-way, waffle slabs, joists, beams and beam frames using the Equivalent frame method The program produces moment, shear and deflection diagrams and rebar layout User can input existing rebar and investigate demand / capacity of existing structures Designs for ACI, European Code and others Keywords: beam; concrete; reinforced concrete; slab Adept Synergis Adept is engineering document and data management solution designed to help companies manage, organize and control access to their critical electronic and capital assets Keywords: collaboration; document management; project management ADINA Finite element analysis system for the analysis of solids, structures, fluids and fluid flow with structural interactions Keywords: dynamic analysis Adobe Acrobat 3D Software for publishing, visualization and review 2D and 3D designs Keywords: virtual model Advance Concrete Advance Concrete is modeling software for structural engineers and detailers seeking a simple to use and completely integrated package in AutoCAD to create all their construction drawings Keywords: automation; concrete; parametric capabilities; reinforcement detailing Advance Design Advance Design was specifically developed for industry professionals that require a superior solution for the structural analysis and design of Reinforced Concrete and Steel structures Advance Design features include easy modeling, a powerful FEM analysis engine, top-level design wizards, automated post-processing of results and automated reports Keywords: concrete design; FEA (finite element analysis); steel design Advance Steel Advance Steel was specifically developed for industry professionals that require a comprehensive and completely integrated package in AutoCAD Advance Steel automates the entire structural CAD process (fabrication, erection drawings, various reports) and creates NC fabrication data in AutoCAD Keywords: automation; CNC; steel; steel detailing http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite von 50 25 Advanced Column Program Interactive design of reinforced concrete columns Generates P/M interaction diagram and displays moment magnification factor for slender columns Keywords: column; concrete; interaction diagram 26 Advanced Multi-Physical Simulation (AMPS) Advanced Multi-Physics and general purpose FEA Implicit and explicit solver options Fluid flow, electrostatic and electromagnetic also available Keywords: electromagnetics; electrostatics; FEA (finite element analysis); fluid flow 27 AEC Budget 2009 AEC Budget 2009 is a cost estimation, budgeting and planning tool to quickly calculate cost of a project structured on bill of quantities in database environment Keywords: cost estimate; estimate 28 AFHTech Reinforced Concrete Beam and Column Design Online and mobile device applications for the design of reinforced concrete columns and beams Keywords: beam; column; reinforced concrete 29 AISISplice AISIsplice is a tool for the analysis and design of bolted field splices for straight, right, I-shaped, steel girders that follows the procedures of the AASHTO LRFD Bridge Design Specifications In the design mode, the software sizes and optimizes the splice plates and bolts In the analysis mode, the software determines the adequacy of given splice plates and bolts For both modes, performance ratios (load/resistance) for all splice components are determined The software output consists of scaled graphics and a detailed report Graphic illustrations include the elevation and cross section views of the splice and adjoined girders Graphical output includes splice dimensions, bolt details, a summary of required filler plates, and splice component performance ratios AISI Splice was developed by Dr Firas Ibrahim and AISI's Transportation and Infrastructure Group Keywords: connection; I Girder; splice; steel; steel connection 30 Algor Software suite for finite element analysis, simulation and optimization methods Keywords: 31 ALLADIN Computational toolkit for the matrix and finite element analysis of engineering structures Keywords: 32 Allplan Nemetschek Allplan provides object-oriented planning and design software for architects and engineers It enables users to create architectural and structure models, as well as obtain information on quantities and costs throughout all project phases What makes this software special is that you can switch between 2D drafting and 3D modeling depending on the project phase or type In this way, you can combine the best of both worlds and use the approach that suits you best at any time Keywords: bridge; building; Building Information Modeling; conceptual design; concrete; concrete reinforcement detailing; construction; detailing; drafting; DTM (Digital Terrain Modeling); foundation design; frame; quantity take-off; reinforced concrete; reinforcement detailing; sketch; solar energy; solid model; stairs; steel; timber 33 Altiscad Intellishape Altiscad Intellishape is a general purpose biaxial bending calculation software tool, developed to design and check any geometry cross section The software allows to design and check the bearing capacity for any geometry cross section The materials for the elements are concrete, reinforced concrete, masonry, composite and also user input materials The software permits the calculus of any type of cross section Altiscad Intellishape is a standalone software which cooperates with Robot Structural Analysis (Robot Millennium) and also with Revit Structure This allows the import of forces, materials and also the geometry of the element (column or structural wall) Keywords: interaction diagram; section properties 34 Analysis for Windows Finite Element Analysis package for 2D and 3D constructions (frames and trusses) Small and easy to use, with special focus on the user friendly Windows interface Includes structural steel design, namely: recommendation of the best cross-section; plastic and elastic design according to Eurocode Each cross-section is tested for: plastic tension or compression; bending moment (major and minor axis); plastic shear resistance; torsion (Saint Venant and warping torsion); reduced plastic shear resistance for the case of combined torsion and shear; reduced moment resistance for the case of combined bending and shear; reduced plastic moment resistance for the case of http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite von 50 combined bending and axial force or bi-axial bending; compression buckling; lateral torsional buckling; combined bending and axial compression (Chen and Atsuta); maximum deflection Large library of commonly used sections included (AISC, British Steel, DIN, Euronorm) Construction or structural drawings can be imported from, or exported to, AutoCAD Keywords: elastic capacity; FEA (finite element analysis); lateral torsional buckling; plastic capacity; steel; torsion, St Venant; torsion, warping 35 AnalysisGroup Tool for solving six common analysis problems: (1) Rectangular mat footings (multiple column or wall loads); (2) Flat rectangular plates in bending (walls, floors, with openings); (3) Shear wall systems (rigid or flexible diaphragms); (4) Beams on elastic foundations (multiple spans & shapes); (5) Circular tank (fluid-filled, above-ground or buried); (6) Continuous beams (multiple spans & shapes, hinges and cantilevers) Keywords: 36 ANSR-1 Legacy software from 1975 for general static and dynamic analysis of nonlinear structures Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ANSR-1: Analysis of Nonlinear Structural Response Mondkar, Digambar P.; Powell, Graham H.; Riahi, Ali; Row, Dennis G.; Maison, Bruce F.; Popov, Egor P Department of Civil Engineering, University of California, Berkeley, 1975, ANSR is a general purpose computer program for static and dynamic analysis of nonlinear structures In it, a structure is idealized as an assemblage of discrete finite elements Each node may possess up to six degrees of freedom The structure mass is assumed to be lumped at the nodes Viscous damping effects may be included, or damping proportional to mass, specified Static loads are applied in a series of load increments, each load increment being specified as a linear combination of static force patterns This feature permits nonproportional loads to be applied Dynamic loading may consist of earthquake ground accelerations, time-dependent nodal loads, or prescribed initial values of nodal velocities and accelerations The elements available are: [1] A three-dimensional truss element, which may yield in tension and yield or buckle elastically in compression Large displacement effects may be included [2] A two -dimensional 4-to-8 node finite element for plane stress, plane strain, and axisymmetric analysis Large displacements may be included and the material may be specified to be isotropic linearly elastic, orthotropic linearly elastic, or isotropic elastic-perfectly plastic with the Von Mises yield function Nonlinearities are introduced at the element level only and may be due to large displacements, large strains, and/or nonlinear materials [3] INEL2, beam-column element which has two-dimensional stiffness and yield characteristics, may be located arbitrarily in a three-dimensional structure and is intended primarily for modeling beams [4] INEL3, a beam-column element which has three-dimensional stiffness and yield characteristics, can be used for modeling columns in which biaxial bending effects may be important and also for structures such as elevator shafts In INEL2 and INEL3, allowance has been made for rigid floor diaphragms by means of a "slaving" feature incorporated into the elements at the element level because ANSR-1 cannot account for slaving at the nodal level Both elements also allow for rigid end zones and for initial element actions [5] The inelastic brace element, INEL4, is a simplified model to describe the macrobehavior of a brace (i.e., the axial force-displacement hysteretic rule) The axial force-displacement algorithm simulates the observed behavior with nine piecewise linear zones The orientations of the zones are defined by: member properties, control displacements, forces, and slopes All of these properties are user selected input to the algorithm The code is organized to permit the addition of new finite elements to the library with relative ease The program permits the user considerable flexibility in selecting a variety of solution schemes, including step-by-step, iterative, and mixed schemes For static analysis, a different solution scheme may be employed for each load increment The dynamic response is computed by stepwise time integration using Newmark's beta-gamma-delta operator Keywords: dynamics; nonlinear; static analysis 37 ANSRuop The ANSRuop computer program is specialized structural analysis software, designed for scientific research as well as to aid practicing engineers Its capabilities include static and dynamic, linear and non-linear analysis of structures A wide spectrum of http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 38 39 40 41 42 43 44 Seite von 50 structures can be analysed through generalized modeling, the program is targeted towards the displacement- and deformation-based assessment of the non-linear seismic responce of reinforced concrete buildings and bridges In this direction, the relevant rules and expressions of Eurocode Part as well as the Greek Code for interventions on existing structues are built into the program Keywords: dynamic analysis; pushover analysis; reinforced concrete; response spectrum analysis; seismic analysis; static analysis; time history analysis ANSYS Suite of general-purpose finite element analysis programs Keywords: FEA (finite element analysis) APOLLO Legacy software from 1978 that incorporates a simplified procedure for onedimensional analysis of generation and dissipation of pore water pressures in a sand deposit due to seismic excitation Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley APOLLO: Analysis of Potential Liquefaction of Soil Layers for One-Dimensional Seepage Martin, Philippe P.; Seed, H Bolton Department of Civil Engineering, University of California, Berkeley, 1978, This program incorporates a simplified procedure for onedimensional analysis of generation and dissipation of pore water pressures in a sand deposit due to seismic excitation The method of liquefaction analysis in APOLLO is outlined by the following steps: (1) By means of a dynamic response analysis of the soil deposit under investigation, time histories of shear stress developed by earthquake are determined at the various depths of interest; (2) For each depth in the soil profile, determine the equivalent uniform cyclic stress, the equivalent number of uniform stress cycles and the effective period of each stress cycle representing the induced stress history; (3) Determine from laboratory cyclic load test the relationships between the applied cyclic shear stresses and the number of stress cycles required to produce a condition of initial liquefaction under undrained conditions; (4) Determine the number of stress cycles required to cause initial liquefaction; (5) Determine rate of pore pressure build up for each elemental layer of the deposit; (6) From a knowledge of the coefficients of permeability and compressibility of the soil layers, determine the corresponding values of the coefficient of consolidation for the different layers; (7) Solve the governing differential equation for the known values of soil characteristics, pore pressure generation expressions and boundary conditions Program APOLLO is used to solve this equation by an implicit finite difference method Keywords: liquefaction; seismic Aprop Determines sectional properties by the "integration of area" method Keywords: section properties ArcGIS ArcGIS is an integrated collection of GIS software products for building a complete Geographical Information Systems ArcGIS enables users to deploy GIS functionality wherever it is needed - in desktops, servers, or custom applications; over the Web; or in the field Keywords: geographical information systems; mapping ArchiCAD Software for architects based on the Virtual Building platform that enables to manage the building information in a digital 3D database Keywords: Archie-M Archie-M is a Windows program (Windows NT/2000 and XP) designed to help with the analysis of masonry bridges and viaducts It is based on the principle of the thrust line, but goes rather farther than that It can be used as part of the assessment or design process Archie-M provides rapid, interactive equilibrium analysis of arching structures The program is a result of nearly 20 years of research and consultancy Archie-M uses the zone of thrust to define the minimum structure necessary to support a given set of loads Graphical and numerical results are updated continuously as loads are moved across the structure by hand or automatically The engineer is able to explore the potential for different load paths to transmit loads to the foundations Keywords: arch; bridge; masonry ASDIP 4.1 Collection of 16 computer programs that carefully combine the latest building code provisions and proven design and analysis techniques to perform many of the repetitive calculations most commonly encountered in any structural design office From walls, corbels and footings, to beams, base plates and columns, ASDIP provides the immediate solution to design, analyze and optimize typical daily design tasks The http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 45 46 47 48 Seite von 50 following programs are included in the suite: concrete beam deflections; cantilever footings; brackets and corbels; concrete deep beams; concrete circular columns; concrete rectangular columns; concrete shear walls; lateral load distribution; masonry walls; beams with web openings; pile foundations; cantilever retaining walls; spread footings; floor vibrations; spread footings; concrete beams; seismic shear walls Keywords: concrete beam; concrete column; footing, on piles; footing, spread; foundation; masonry wall; pile; shear wall ASDIP Steel Suite of program specifically dedicated to the design of structural steel members, based on the AISC 360 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office The suite contains the following programs: steel base plates; steel columns; steel and composite beams Keywords: base plate; steel beam; steel column; steel concrete composite beam ASHSD2 Legacy software from 1969 evaluates the time dependent displacements and stresses of complex axisymmetric structures subjected to any arbitrary static or dynamic loading or base acceleration Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ASHSD2: Dynamic Stress Analysis of Axisymmetric Structures Under Arbitrary Loading Ghosh, Sukumar; Wilson, Edward L Department of Civil Engineering, University of California, Berkeley, Revised by: C.-J Lin, United Engineers and Constructors, Philadelphia, Pennsylvania, 1974., 1969, ASHSD2 evaluates the time dependent displacements and stresses of complex axisymmetric structures subjected to any arbitrary static or dynamic loading or base acceleration The three-dimensional axisymmetric continuum is represented either as an axisymmetric thin shell, or as a solid of revolution, or as a combination of both The axisymmetric shell is discretized as a series of frustrums of cones and the solid of revolution as triangular or quadrilateral toroids connected at their nodal point circles The program can solve five cases of loading: dead load, arbitrary static load, arbitrary dynamic load, horizontal and vertical component of earthquake acceleration record applied at the base of the finite element model A separate version of the program for static analysis only (ASHSAB.FOR) contains in-core as well as out-of-core equation solvers Keywords: dynamics; static Asite Asite is a collaboration solution for the construction industry that enables to reduce project risk by enhancing project communication, information sharing and project management Keywords: collaboration; document management; project management ASKxELP Semi-legacy software from 1999 to model the impact of seismic risk on a territory with electric power networks Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley ASKxELP: Assessment of Seismic RisK for ELectric Power Networks Giannini, Renato; Pinto, Paolo E.; Vanzi, Ivo 1999, ASKxELP is a Fortran computer program which models two different but interacting aspects of the seismic risk on a territory: first, the seismic behavior of an Electric Power Network (EPN), from both the structural and electric viewpoints and, secondly, the expected number of casualties in the municipalities Interaction is intended in the sense that, electric power being essential for emergency operations (hospitals, telecommunications, emergency management centers, etc.), complete or partial blackout at a point in the affected area increases the time of response for rescue and hospitalization the injured EPN's are extremely vulnerable lifelines since they contain a large number of pieces of equipment not designed to withstand lateral forces This equipment is concentrated in the stations, or nodes of the network Line malfunctions originating from any station may spread to significant parts of the system and cause a larger scale blackout As a local damage indicator, the number of casualties is used; this computed as the product of the population and the percentage of casualties in the population modeled as a random function of the local earthquake intensity The program allows: a look at only the network, or only at the casualties within the territory, or at their interaction performing either scenario studies, conditioning the results to seismic events of given magnitude and location, or full reliability studies, considering different sources of randomness (earthquake magnitude and location, attenuation, etc.) analysis of large scale system behavior with synthetic indexes, or behavior at a small scale, with analytical indexes http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 49 50 51 52 53 54 55 56 57 58 59 60 61 Seite von 50 giving detailed territorial information Synthetic indexes are useful from the network manager's viewpoint whereas analytical indexes are useful from the local community's perspective Results are output either to a text file or a file post-processed with an external graphic program (PLOTxELP)to show the statistical results in the territory Keywords: seismic Aspen Software for the analysis of stratified slope stability using limit equilibrium methods, with automatic searching of the critical slip surface Enables to account for the optional insertion of stabilisation work (excavation, banking, banking walls, piling, bulkheads and tie rods) with the purpose of planning consolidation work Keywords: slope stability ATENA Program for simulation of real behavior of concrete and reinforced concrete structures Keywords: concrete; reinforced concrete Atlas 1D beam analysis program Using Cross Hardy method, calculates moments, shears and reaction for a beam loaded by point or distributed loads Interactive graphical user interface Keywords: beam; Hardy Cross method AutoCAD Drafting and detailing software Keywords: Autodesk Inventor Autodesk Inventor software is the foundation for digital prototyping The Inventor model is an accurate 3D digital prototype that enables users to validate design and engineering data as they work, minimize the need for physical prototypes, and reduce costly engineering changes discovered after the design is sent to manufacturing It enables innovative approaches to accelerate and simplify the concept-to-manufacturing process Keywords: prototyping Autodesk Revit Structure Suite AutoCAD Revit Structure Suite combines AutoCAD software with the Revit Structure building information modeling (BIM) application Keywords: Building Information Modeling; parametric capabilities AutoStair AutoCad extension to produce drawings and dimensions for steel stringers for fabrication User inputs run and rise for stairs, AutoStairs draws and dimensions stringers ready for fabrication Keywords: stairs; steel; steel detailing AutoStructural AutoCad extension to produce drawings for structural steel beams and columns Auto backoffs, copes, and dimensioning draws and dimensions beams and columns from user input and AISC data file Keywords: autocad; steel; steel detailing AutoVue Software suite for accessing, viewing and sharing information and project documents It comes in the following solutions: AutoVue Office; AutoVue 2D; AutoVue 2D Pro; AutoVue 3D Pro SME; AutoVue 3D Advanced; AutoVue 3D Pro Advanced; AutoVue EDA Pro; AutoVue Electro-Mechanical Pro Enables integration with OpenText, Documentum, SharePoint, and SAP Keywords: collaboration; document management AxisVM Structural analysis software for steel, concrete, wood, aluminum or composite structures Design of steel and concrete beams, columns, slabs, membranes, shells Keywords: BAP Continuous beam analysis Keywords: Barlist Reinforcing Steel Quantity Estimates Interactive bend guide for selecting bend diagrams, and support for third party add-in components Keywords: BASSIN Legacy software from 1983 to compute three-dimensional dynamic response of an arbitrarily configured, elastic, bridge/abutment/backfill system Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley BASSIN: Dynamic Analysis of Bridge/Abutment/Backfill Systems Subjected to Traveling Seismic Waves Dendrou, Basile Agbabian Associates, El Segundo, California, 1983, The BASSIN methodology has the following features: It computes the three-dimensional dynamic response of an arbitrarily configured, elastic, bridge/abutment/backfill system It assumes this system to be underlain by a soil continuum that is represented as an elastic half- space It represents seismic input motions as being harmonic and induced by planar P-, SV-, SH-, or Rayleigh waves with arbitrary wavelength, amplitude, and direction of incidence The methodology uses a substructure approach in which the structure (which comprises the bridge, abutment, and backfill) is represented using a three-dimensional finite element model, and the underlying soil continuum is represented using a boundary element approach The finite element model http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 62 63 64 65 66 67 68 69 70 71 72 Seite 10 von 50 defines the stiffness matrix, mass matrix, and fixed-base nodes for the structure The boundary element approach characterizes the underlying soil medium using frequencydependent impedance matrices and driving force vectors that also incorporate the free-field wave motions Compatibility and equilibrium requirements at the soil/structure interface are used to couple these substructures The steady-state response of the soil/structure system is then computed Keywords: abutment; bridge; seismic BD2 (Bridge Designer II) 2D stage construction analysis and design of pre/post-tensioned concrete bridges Keywords: balanced cantilever bridge; staged construction BD3 3D stage construction analysis and design of pre/post-tensioned concrete bridges Keywords: Be06 Be06 calculates the expected energy demand to operate the heating and climate conditioning systems in all types of buildings e.g houses, block of flats, offices, institutions, schools, shops and workshops The Be06 software calculates the needed energy supply to a building for room heating, ventilation, cooling, hot water and artificial lighting dependent on e.g building design, building envelope, daylight access, ventilation system, heating installation and energy supply including alternatives as solar heating, solar power and heat pumps The energy supply needed to the building is compared to the energy frame in the Building Regulations Keywords: building; energy analysis Beam (Fine) The program provides analysis of foundation beams resting on elastic subsoil Beam program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: beam; beam on elastic foundation; Winkler-Pasternak subsoil model Beam on Winkler Foundation Finite element analysis for a beam on elastic foundation Beam consists of nodes and members Automatic generation of non loaded additional nodes Up to loading cases, up to 15 loading combinations Each node may have vertical movement and/or twist restrictions Vertical nodal loads, moment nodal loads Each member may have a different geometry, elastic properties, modulus of subgrade reaction, Ks, and UDL load Calculates deflections, soil stresses, bending moments, shear forces, node restriction reactions for each load combination or envelopes for the above Generates deflection, bending moment and shear force diagrams (combinations and envelopes) Paged printing in tables with linked over pages tables always having labels above Keywords: beam on elastic foundation Beamax Application for graphically creating, editing and analysing continuous beams Keywords: beam BeamBoy Calculates engineering stress and deflection in structural beams and shafts Keywords: beam BEAMD Integrated solution for RC beam design, detailing, drafting and scheduling Keywords: concrete beam BeamElas Versatile finite element program for the analysis of any combination of foundation shape and cross section, including pipe and beam, resting on an elastic foundation Supports multiple load combinations A straightforward and concise single input and output screen features graphical display of the applied loads, resulting moments, shear, deflection, rotation, and soil pressure Keywords: beam on elastic foundation BearFoot Treats the general case of bearing capacity of shallow foundation Determines the soil's bearing capacity by four methods, foundation settlement by two methods, calculates pressure distribution under the footing as well as the rotation of the footing Keywords: bearing capacity; footing BEToolbox Collection of legacy bridge engineering tools by Washington Department of transportation Includes: (1) BOXGIR - section properties of box girders; (2) COMGIR computes bending stresses in the top and bottom flanges of a curved composite girder; (3) CURVEL - computes elevations for alignments with horizontal and vertical curves; (4) GIRCOMP - section properties of built-up or rolled beam composite steel girders; (5) GPILE -computes individual pile loads in a pile group; (6) PSGDES - precast girder design and analysis, camber and deflection calculations, and handling and hauling analysis for the http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 36 von 50 311 Programs for HP Calculator Collection of several hunderds civil engineering programs for HP calculator Keywords: calculator; hp 312 ProjectWise ProjectWise is a scalable collaboration system used by teams to manage, find, and share CAD and geospatial content, project data, and Office documents Keywords: collaboration; document management; project management 313 PSBeam Design of precast, prestressed concrete bridge girdes Keywords: bridge; load rating; post-tensioned concrete; prestressed concrete 314 PT CAD Tool Detailing, Post Tensioning, Automatic Tag Generation, Cutlist in CAD & MS Excel, Metric, Soft-Metric & Imperial Unit Keywords: detailing; drafting; posttensioning 315 QConBridge Live load analysis program for continuous bridge frames Keywords: AASHTO; AASHTO LRFD; bridge; grillage analysis; line beam analysis; moving load analysis 316 QuickConcreteWall Design and checks of reinforced concrete shear walls Keywords: 317 quickEC3 Training tool for EN 1993-1-1 (EC3), quikEC3 is useful electronic blue book which can calculate properties, section classifications and structural capacities for a wide range of section shapes, using EC3 terminology A database of all major worldwide steel sections is included but custom tables are easily built for non-standard sections In addition, the program calculates the following: section classifications for axial, y bending, z bending (for non-symmetrical sections, classification is carried out for either top, bottom, left or right of section in compression depending upon section orientation) Calculation of effective section properties for class4 (slender) sections including any shift in neutral axis Section capacity checks: axial tension, axial compression, moment, low shear, high shear, moment and shear, moment with axial, moment axial and shear for both Y and Z axis bending Class 1, 2, and (slender) sections are covered Combined axial, X moment and Y moment capacity checks Keywords: Eurocode; lateral torsional buckling; section properties; steel 318 QuickMasonry Design and checking of a variety of masonry components used in buildings Keywords: masonry 319 QuickRFooting Concrete spread footing design and checks Keywords: footing 320 QuickRWall Design of concrete or masonry retaining walls Keywords: retaining wall 321 QUIKBEAM Tool for design of steel beams and composite construction Keywords: beam 322 QUIKFRAME Structural analysis tool for analysis of 2D frames Keywords: 2D analysis; 2nd order analysis; frame (matrix) analysis; linear elastic analysis 323 QUIKJOINT Comprehensive program for design of steel connections Keywords: connection; steel connection 324 QUIKPORT Program for analysis of portal frames Includes elastic, elastic-plastic and rigorous minimum weight plastic design - all in the one program It also has advanced 2nd order and stability methods Keywords: 2D analysis; 2nd order analysis; elastic-plastic design; frame (matrix) analysis; linear elastic analysis; plastic design; stability 325 RC-PADD RC-PADD stands for "Reinforced Concrete - Post-Analysis Designer and Detailer" It is a special-purpose program for the structural design of reinforced concrete building structures and the subsequent detailing The post-analysis nature of the program gives it more power over conventional "integrated" programs that carry out altogether the structural analysis and the structural design Once the structure is analyzed using a reliable structural analysis program, the model and the results are imported to RC-PADD, where the structural design and detailing are carried out Keywords: concrete; detailing; seismic analysis 326 RCAD Formwork Drawings Program for 3D modeling of an reinforced concrete building and generating member drawings Formwork drawings may present selected elements, their groups, projections of stories and vertical cross-sections of the building Drawings generated by the program may be automatically exported to the RCAD Reinforcement program, thus being the base for preparing drawings of structure reinforcement An advantage of the program is its intuitiveness Automatic generation of building crosssections, automatic positioning and dimensioning of structural elements, handy databases of elements and materials - all these result in a considerable reduction of time for creating http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 327 328 329 330 Seite 37 von 50 documentation with the use of the RCAD Formwork Drawings program Keywords: concrete; formwork RCAD Reinforcement RCAD is a new leading edge solution for the modeling and drafting of steel and concrete structures RCAD can be used in a variety of situations and, built upon the philosophy of integrated solutions, allows the user to benefit from a truly seamless integration of drafting, analysis and design RCAD software is a solution completely integrated with Autodesk products and may be used with both AutoCAD and Architectural Desktop As with all RCAD products, the complete range of AutoCAD/ADT commands are available at any time RCAD Reinforcement is a solution that allows the fast and effective definition of reinforced concrete structures inside AutoCAD The software has many "templates" that comply with the detailing practices of different countries around the world, to ensure that local detailing methods can be used and the appropriate bar schedules produced automatically Several macros exist for the fast and efficient detailing and scheduling of "standard" structures, such as pad footings, staircases, beams and columns As with RCAD Steel, the software benefits from complete integration with the world renowned analysis and design software ROBOT Millennium - thereby producing automatic drawings of reinforced concrete members that have previously defined in ROBOT Millennium Keywords: integrated software; steel; steel detailing RCAD Steel RCAD is a new leading edge solution for the modeling and drafting of steel and concrete structures RCAD can be used in a variety of situations and, built upon the philosophy of integrated solutions, allows the user to benefit from a truly seamless integration of drafting, analysis and design RCAD software is a solution completely integrated with Autodesk products and may be used with both AutoCAD and Architectural Desktop As with all RCAD products, the complete range of AutoCAD/ADT commands are available at any time RCAD Steel allows users to easily define steel structures inside AutoCAD/ADT The software has a full library of steel sections from around the world and also has various "macros" built in as standard to facilitate the simple generations of standard details, such as connections, staircases and handrails Facilities also exist to produce simple general arrangement details or even more detailed shop drawings However, arguably the strongest part of the solution is the ability of RCAD Steel to integrate with ROBOT Millennium analysis and design software, thereby providing a single solution for drawing, analysis, design and final detailing A typical practical example of this could be that the draftsman would set up a drawing in RCAD Steel, the engineer would then work on the integrated ROBOT file and maybe make some changes to the section sizes used and then the draftsman would benefit from a "seamless" update of the drawing file that could then be taken further to produce final drawings The benefits, both in terms of time saved and also accuracy, are obvious Keywords: integrated software; steel; steel detailing RcSections RcSections is a 32-bit Windows program designed specifically for structural engineers to perform axial-flexural analysis and design of concrete sections (beams, columns or walls) according to ACI 318-05/02 and ACI 318-99 It analyzes the uniaxial- or biaxial-bending capacity of multiple sections of various regular shapes (rectangular, round, Tee, I, L) and generic shapes (with openings) simultaneously in a fast and user-friendly manner Multiple load sets may be input and checked against capacities of the sections It features tabulated strain-P-M at every user defined neutral axis step, 2D P-Mx and P-My interaction diagrams, and even 3D P-Mx-My interaction surface built upon OpenGL(R)! Keywords: beam; column; concrete; interaction diagram; wall Real3D-Analysis Real3D-Analysis a powerful frame-finite element analysis and design program built from ground up, with latest technologies from the fields of finite element analysis, numerical computation and computer graphics It brings accuracy, reliability, and ease of use to average structural engineers to perform static analysis, dynamic analysis and concrete design of general truss, frame, plate and shell structures It features unique 128-bit floating point solver, multiple document interface spreadsheet input and output as well as compelling graphics built upon industry standard OpenGL(R) Keywords: concrete; dynamic analysis; FEA (finite element analysis); OpenGL graphics; shell; static analysis http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 38 von 50 331 Rebar Development and Splice Length Calculate required development and splice lengths for tension, hooked and compression splices according to ACI 318 Keywords: reinforced concrete 332 Regression Analysis Curve fitting application based on regression analysis Keywords: regression 333 Rescol Calculates foundation spring constants, period of stratified soil, and design seismic spectra Keywords: footing; foundation; soil-structure interaction 334 Retain Pro Analysis and design of retaining wall with nearly any configuration or loading condition Design of restrained (basement and tieback) walls Keywords: retaining wall 335 Retaining Wall Software Digital Canal's Retaining Wall software designs and checks retaining wall systems, including the wall, footing toe and heel and a footing key if necessary Retaining Wall can check the capacity of an existing wall (including as "built" bar sizes and spacing) or determine the required dimensions and steel requirements Walls can be constructed of cast-in-place concrete or masonry and can be cantilevered or supported on the top and bottom (i.e a basement wall) Keywords: retaining wall 336 RetainWall RetainWall is a software mainly developed for the purpose of designing a concrete or masonry retaining wall The wall may retain soil or other granular material It analyses the stability of the wall based on the loads and resistances, and results in bearing pressure, sliding, overturning and rotational stabilities Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads Resistances may consist of base friction and cohesion, passive earth pressure, other structures or a shear key Load and resistance factor design (LRFD) mode can be applied If the wall is a reinforced concrete structure, the software also supports the reinforcement design Main features: Load and resistance factors design (LRFD) capable - Ready to use load and resistance factors combinations from AASHTO 2007, ACI 318-08 and IBC 2006 - Load and resistance factors editor to modify or create new combination - Concrete reinforcement design from ACI 318-08 - Force diagrams (moment, shear and normal) for every combination - Loads, resistances and reactions diagram for every combination - Wall stabilities (bearing, sliding, overturning, rotation) for every combination - Possibilities to choose active or at rest soil pressures - Possibilities to choose elastic (rock) or plastic (soil) bearing pressures Possibilities to input user's soil pressure coefficients - Reinforcement design for upper stem, lower stem, toe and heel - Unit systems, properties, load and resistance factors, reinforcement design method, and page setup from last editing become the default for new design - Possibilities to add other loads on wall - Provide stability resistances from a shear key, toe passive soil pressure, adjacent structure, anchors or piles - Enable or disable a shear key, water or seismic - Support metric, SI and British unit systems - Easy, clear, quick and simple software operation - Help facilities Keywords: concrete; masonry; retaining wall 337 RetWall Versatile program for the design and analysis of cantilever or gravity retaining walls with a geotechnical engineering flavor In addition to the conventional stability checks and structural design, the program provides an estimate of the settlement and rotation of the base, calculates the bearing capacity of the soil based on user-supplied soil parameters, taking into consideration the effects of the wall shape and applied loads Accounts for the presence of water and easily evaluates seismic conditions Prepared in accordance with Eurocode and ACI codes Keywords: retaining wall; settlement 338 Revit Structure Revit Structure software integrates a multimaterial physical model with an independently editable analytical model for efficient analysis, design, and documentation Create your own models or import architectural files from AutoCAD Architecture or Revit Architecture Bidirectional linking to structural analysis software enables accurate model updates, while parametric change management technology coordinates those updates across your documents Keywords: building; concrete; parametric capabilities; shared model; steel 339 RING Masonry arch bridge analysis software Keywords: arch; masonry 340 Risa Software Suite Structural analysis and design software suite includes: (1) RISA-2D Simple 2D Structural Engineering Software for Analysis & Design of continuous beams, 2D trusses, and 2D frames (2) RISA-3D - 3D Structural Engineering Analysis & Design http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 341 342 343 344 345 346 347 348 349 350 351 352 353 Seite 39 von 50 Software for general frame, truss, and plate/shell structures (3) RISAMasonry - Masonry Design and Analysis (4) RISATower - Tower Analysis and Design (5) RISAFloor Structural Engineering Software for Buildings (6) RISAFoot - Biaxial Analysis and Design of spread footings to get bearing pressures and reinforcing steel (7) RISABase - ccurate Biaxial Analysis & Design Software of steel base plates and anchor bolts (8) RISASection Design Software for shape calculations for any combination of standard or built-up shapes Keywords: RiverCAD RiverCAD is a sophisticated river modeling software than can be used for evaluation of bridge scour The software was developed in cooperation with several major engineering companies involved in FHWA and DOT bridge replacement contracts to completely automate the FHWA HEC 18 bridge scour calculations and analysis, design, and reporting necessary for bridge replacement and armoring projects RiverCAD will analyze a bridge for scour and create a "ready-to-submit" FHWA-accepted bridge scour engineering report in just minutes The scour report includes all input data, equations, variables, intermediate results, final analysis results, and analysis narrative - along with placing the computed scour results directly on the bridge within the AutoCAD drawing RiverCAD's bridge scour calculations and analysis can account for: * Contraction scour * Pier scour * Bridge abutment scour * Bridge skew * Pier skew * Pier shape * Sloping and skewed abutments * Soil bed material * Armoring of bridge abutments * Armoring of bridge piers * US, metric, or mixed unit-based input data Keywords: bridge; scour RM2006 4D static and dynamic design and analysis of concrete, steel and composite structure Can be used to investigate any bridge type and erection sequence Incoporates 14 international design codes Keywords: bridge; moving load; moving load analysis; staged construction RMCalc Calculation of restraint moments in precast prestressed concrete girder bridges constructed with continuous spans Keywords: ROAD System for design of road and railway construction projects Keywords: Roark Formulas for Excel Design and analysis of structural elements Keywords: ROBO(r)CONTROL ROBO(r)CONTROL is fully automated robust bridge monitoring system It enables to measure loads, movements and other parameters at bridge bearings, expansion joints and shock absorbers, but the system can also be used to measure and calculate characteristic bridge parameters such as natural frequency ROBO(r)CONTROL measures parameters at predetermined intervals and transmits data by means of a GSM module to a central computer system There, the data is processed and authorised users can access it on a secure web page Keywords: data acquistion; structural health monitoring Robot Millenium Single solution for the structural engineer incorporating frames, finite elements and design in mixed materials with advanced solution possibilities into an intuitive native Windows interface Keywords: 2D analysis; 3D analysis; bridge; building; dynamics; FEM plates; FEM shells; FEM solids; modal analysis; offshore structures; pushover analysis; seismic analysis; statics; time history analysis ROBOT Office Navigator A tool for (1) management of project documentation created in different programs; (2) integration of documentation and different programs used in design; (3) management and creation of user's own knowledge database linked with information available in the Internet Keywords: project management Rockgrout Suite of programs about cement grouting in rock foundations for dams and other heavy engineering structures Keywords: cement grouting; grouting; rock Roshaz Aimed at solution of complex solids with realistic and advanced boundary condition simulations using either the integrated solver or a choice of several other well known solvers which can be run seamlessly within the program environment Export/Import capabilities to major FEA codes (Abaqus, FemDesigner, Lusas, Nastran and CalculiX) Keywords: RspBr2 Plane frame structural analysis program Keywords: RWALL Retaining wall design program Keywords: S-Frame General 3D frame and finite elements structural analysis software Keywords: buckling; concrete design; eigenvalues; integrated software; moving load; P-delta analysis; http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 354 355 356 357 358 359 360 361 362 363 364 365 366 Seite 40 von 50 response spectrum; static linear analysis; static nonlinear analysis; steel design; time history analysis SABRE Sign bridge analysis and evaluation system Keywords: SAFE Integrated design of flat slabs, foundation mats, and spread footings Keywords: footing; foundation design SAFI Software Suite Structural Analysis Software Suite includes: (1) Steel Calculator (2) Concrete Calculator (3) SAFI 2D (4) SAFI 3D (5) SAFI Steel (6) SAFI Concrete (7) SAFI Bridge (8) SAFI Steel-Wood Bridge (9) SAFI Pretension (10) SAFI Tower (11) SAFI Tubular Keywords: SAM Integrated Bridge Design Software Specialized bridge design software for medium span bridges that integrates code checking with analysis Contains modules for section properties, differential temperature analysis of any section, design and assess of concrete sections, torsion and shear calculations for any section, and thermal cracking of concrete sections Keywords: AASHTO LRFD; analysis; bridge; design; dynamic analysis; grillage analysis; line beam analysis; moving load analysis; post-tensioned concrete; prestressed concrete; reinforced concrete; section properties; staged construction; steel concrete composite beam; tendon SAP2000 Integrated software for structural analysis and design Keywords: bridge; cable; concrete design; creep; dynamic analysis; eigenvalue analysis; influence line; influence surface; moving load; moving load analysis; pushover analysis; response spectrum; response spectrum analysis; seismic analysis; staged construction; static analysis; steel design; tendon SARA Probabilistic-based assessment of engineering structures Keywords: probability; reliability Sarcophagus Project extranet service that provides web based project collaboration and information management via a safe and centralised repository for all project information Keywords: collaboration; document management; project management Scia Engineer Scia Engineer analyses, designs and details any type of structure From the simplest to the most complex construction in concrete, steel, aluminium, plastic, timber or mixed, with integration of the local and international codes and with a link between the analysis and drawing components Keywords: bridge; connection; detailing; dynamic analysis; fire resistance; large deformations; object oriented modeling; optimization; parametric capabilities; static analysis; weld Scia Steel Scia Steel is modular software for the control of the manufacturing and execution process of steel construction The core of the system is made of the parts list (abbreviation B.O.M for "Bill of Materials") and of the geometrical data on this parts list The parameter setting of Scia Steel guarantees that this data-processing solution is appropriate for each organisation Moreover, the modular approach allows an optimal adaptation to any modification with regard to the structure of the company Many steel constructors already changed to CAD and the use of CNC machines Scia Steel is the logical link between CAD and CNC for all work preparation with respect to treatment and transfer of seized data to related systems Keywords: CNC; estimate; fabrication; steel SDS/2 Detailing System SDS/2 enables one to automatically design connections using a 3D model with a multitude of options for beams, columns, bracing and joists Connections are designed based on parameters that you define for each job Designate material, edge distance, cope criteria and other connection specifications, and SDS/2 will automatically generate connections that meet your requirements Keywords: CNC; connection; parametric capabilities; steel detailing Section Computation of cross-sectional parameters for arbitrary cross-sections: location of the center of gravity, length of the perimeter, moment of inertia and radii of gyration, section moduli, ellipse of inertia, torsion constant Keywords: section properties Section Builder Generation of steel, concrete and composite cross sections Keywords: section properties SectionCalc SectionCalc enables to quickly calculate the following 14 sectional properties from graphical input: area, centroid location, perimeter, moments of inertia (Ixx and Iyy), http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 367 368 369 370 371 Seite 41 von 50 product of inertia, polar moments of inertia, distance of neutral axis from extremes (Cx and Cy), radius of gyration (kx and ky), section modulii (Sx and Sy) Using DXF format, SectionCalc can also import cross sections created in many popular CAD applications Keywords: section properties Sector Calculates cross-sectional properties of thin-wall steel cross-sections: location of the center of gravity, cross-section area, moments of inertia and radii of gyration, ellipse of inertia, torsion constant, location of the shear center, sectorial ordinates, static sectorial moment, sectorial moment of inertia Keywords: section properties; thin-wall SEGAN Legacy software from 1978 for the analysis of curved segmentally erected prestressed concrete box girder bridges, including time dependent effects, so that deflections and stresses can be computed at any stage during the construction or service life of the bridge Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley SEGAN: Analysis of Curved Segmentally Erected Prestressed Concrete Box Girder Bridges Van Zyl, Stefanus F Department of Civil Engineering, University of California, Berkeley, 1978, This program permits the analysis of curved segmentally erected prestressed concrete box girder bridges, including time dependent effects, so that deflections and stresses can be computed at any stage during the construction or service life of the bridge The segments can be either precast or cast in place The bridge cross section must consist of a single box section with vertical or inclined webs and have cantilever flanges Width and depth dimensions can vary along the bridge span Time-dependent material changes, such as creep and shrinkage of concrete, as well as environmental effects such as humidity and temperature changes, are accounted for However, other concrete material nonlinearities such as cracking or inelastic behavior and geometric nonlinearities are not included in the analysis Prestressing in the longitudinal direction can be included in the analysis Tendons can be located in either the webs or flanges and can have a linear or parabolic profile Stressing and release operations, slip in of tendons, and restressing and removal of tendons are included A procedure is included for specifying the structural configuration and the erection sequence Operations used in segmental construction, such as addition of segments, prestressing, changing of support boundary conditions, application or removal of construction loads, and prescribed displacements can be analysed At each construction stage, the current structure is analyzed and the incremental and total displacements, stresses, and strains are obtained The complete structure can also be analyzed for a variety of live loads and time steps Keywords: concrete; creep; segmental bridge; shrinkage SEL - Structural Engineering Library Set of most common structural engineering calculations integrated into a single program with detailed online manual Includes the following modules: (1) analysis - single span beam, beam on elastic foundation, torsional analysis of rigid diaphragms, section properties, pole footing, pile group load, multi-story seismic, multi-story wind, multi-story column; (2) timber beam & joist, multi-span timber beam, heavy timber beam, cantilevered beam systems timber column, wood ledger, shear wall & footing, plywood diaphragm, high-load diaphragm, bolt groups in timber; (3) steel multi span beam, steel beam design, steel beam with torsion, steel column, composite beam, base plate, bolt group; (4) concrete - multi span beam, rectangular column, shear wall, square footing, combined footing, rectangular beam, circular column, tilt-up wall panel, general footing, rebar embedments; (5) masonry - masonry wall, column, shear piers, slender wall, pilaster, masonry lintel; (6) retaining wall - cantilevered, restrained basement Keywords: Settle Calculates the short term and consolidation settlement of shallow foundations, as well as the time required to attain a certain settlement percentage Contains handy tools to estimate the required settlement parameters based on published research Keywords: settlement ShapeBook ShapeBook with 2D3DSteel is a quick reference and AutoCAD parametric drafting application for structural steel design and detailing ShapeBook is based on the AISC Manual of Steel Construction LRFD, 3rd Edition Structural steel shapes are available http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 372 373 374 375 376 377 378 379 380 Seite 42 von 50 in US imperial and metric units Keywords: parametric drafting; section properties; steel; steel detailing ShapeBuilder Calculates geometric section properties Keywords: section properties ShapeDesigner Software for generation of steel, concrete and composite cross sections and stresses analysis Keywords: section properties; thin-wall; warping Sheeting Check (Fine) Program allows you to analyze sheeting structures (anchored, strutted and non-anchored structures) employing the method of dependent pressures magnitudes of pressures acting upon a structure depend on structure deformation The actual solution is provided by the FEM Sheeting check is program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: retaining wall; sheeting; slope stability Sheeting Design (Fine) The program is used to design sheet pile structures It provides required pile embedment lengths (for fixed and hinged heels) and anchor forces and internal forces on the construction Sheeting design is program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: retaining wall; sheeting SHLAG Legacy software from 1990 to analyze shear lag in simple and continuous T, I, and Box Beams Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley SHLAG: Shear Lag Analysis of Simple and Continuous T, I, and Box Beams Song, Qi-Gen Department of Civil Engineering, Southeast University, Nanjing, China, 1990, Stress distribution in wide beam flanges and the related problems of effective width or stress ratio have been studied experimentally and theoretically by harmonic analysis and by finite element analysis Based upon some rational assumptions for the behavior of the web of the beam, a simplified shear lag analysis for the stresses in the flanges, which is convenient for a wide range of problems is implemented in SHLAG The report discusses the convergence of the solution for peak stresses, and an improved technique is developed Theoretically, due to the shear lag effect, the longitudinal distribution of the bending moment in a continuous beam with wide flanges is differenct from that for a prismatic beam analysed by elementary beam theory A general procedure for determining the stress resultants in a continuous beam considering the shear lag effect is also presented The program requires only a minimum amount of input data for the calculation of the stress distribution and the stress ratios in the flanges of these beams for a variety of loading cases Keywords: shear lag Sigma-X Designer Design of steel structures Keywords: steel Sigma-X Post Tension Bridge Software for analysis of a stage construction processes during the fabrication of a post tensioned bridge Sigma-X Post Tension Bridge accounts for differential creep, differential shrinkage, losses due to anchorage, secondary moments, temporary and permanent (bonded, unbonded, internal or external) tendons for each segment over all stages of construction Offers multiple cross section options directly from Sigma-X Section software which is fully integrated within it Keywords: segmental bridge Sigma-X Post Tension Floor Sigma-X Post Tension Floor is based on equivalent frame method and enables to model any shaped slab, supporting walls and columns and any number of voids Post tensioning tendons can be bonded or unbonded, banded or distributed Slabs can be supported by internal and/or external columns, above or below the slab, or walls and can have holes/voids/drop caps Sigma-X Post Tension Floor calculates losses due to creep, shrinkage of the concrete and relaxation, friction and wobble losses in the tendons Keywords: post-tensioned concrete Sigma-X Section Calculates geometric and material properties of standard, arbitrary and built Up sections Features powerful drawing and editing tools including polar and orthogonal tracking, curves, shape integration, undo and redo, quick conversion between metric and imperial units and an active report writer Data can be input graphically, from tables, from built-in library of standard sections, from AutoCAD or from digitized images (scanned photos or drawings) Calculates area, moment of inertia, elastic moduli, section centroid, torsion constant, principal properties and rotation of sections Allows for voids, http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 381 382 383 384 385 386 387 388 389 390 Seite 43 von 50 openings and embedded sections Shapes and sections can be rotated through 360 degrees Advanced edition of Sigma-X Section calculates equivalent material properties, properties of reinforced concrete in sagging and hogging, heutral axis position, compression only materials (concrete) Keywords: section properties; thin-wall; torsion, warping; warping Skeleton Analysis of plane frames Keywords: SketchUp A 3D sketching software for the conceptual phases of design Keywords: sketch Slab Bridge Designer Design of cast-in-place steel reinforced concrete slabs according to AASHTO LFD and LRFD Keywords: bridge; slab Slabs by the Pieper-Martens method Windows program for slab analysis by the PieperMartens method Reinforced concrete design of slabs according to EC2 4-way slabs, 3-way slabs, 2-way slabs and cantilever concrete slabs of orthogonal shape Any ratio of slab sides, any system of continuous slabs Capability of calculating loads for supporting beams (not mandatory) Paged printing of input data and results Greek and English versions of the software Brief manual, complete legend for symbols and notation, example Keywords: concrete; slab SLFFEA General finite element analysis software targeted towards mechanical engineering Keywords: SLOPE Computer program for analysing the stability of slopes The program is also applicable to earth pressure and bearing capacity problems Optional facilities are available for the analysis and design of reinforced soil Keywords: reinforced soil; slope stability Slope Stability (Fine) The slope stability problem is solved in a two dimensional environment The slip surface can be modeled in two different ways - the circular one (Bishop or Petterson method), or the polygonal one (Sarma method) Slope stability program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: slope stability SMART SMART is a 100% web based management system for infrastructure assets A unique prototype feature allows the user to define a hierarchy of structures and components, and to define data fields for inventory data Central facilities are the principal inspection module and the activity management including ranking of activities, follow-up on execution, and long-term budgeting Integrated document management facilities SMART mobile allows for managing activities on site using PDA with online connection to the database Keywords: asset management; bridge management; building management SOFEA Open source Matlab object oriented finite element toolkit Includes solvers for linear transient thermal analysis and elastodynamics The finite elements include linear and quadratic triangles, tetrahedra, quadrangles, hexahedra, and linear and quadratic segment elements Keywords: FEA (finite element analysis) Sofistik FEA and CAD software for civil and structural engineering modeling, analysis, design, and detailing SOFiSTiK is one of the most complete FE packages and covers almost all structural engineering disciplines: building, bridges, foundation, tunneling, membranes, lightweight, dynamics Design code checks can be performed for 18 international codes FEA suite (SOFiSTiK) includes the following programs: Sofistik Structural Desktop - SSD (main user interface that helps the user control various modules), CADINP (text editor and script language to define parametric input), SOFIPLUS (standard pre-processor based on AutoCAD), ASE (3D finite element analysis), STAR (3D frame analysis), SlabDesigner PRO (analysis of slabs, walls, frames and grillages), TALPA (linear and nonlinear plain strain/stress analysis), HASE (soil-structure interaction), PFAHL (analysis of pile foundations), HYDRA (analysis of potential problems), PHYSICA (multiphysical code for computation fluid dynamics that can be used for dynamic wind analysis of bridges and buildings) CAD Suite (SOFiCAD) includes the following programs: SOFiCAD DETAILING (tools for construction and formwork planning), SOFICAD REINFORCEMENT (used to generate reinforcement drawings within AutoCAD), SOFiCAD BAMTEC (detailing of reinforcement mats), SOFiCAD ALIGNMENT (horizontal and vertical alignment of highway structures and bridges), SOFiCAD STEELWORK (steel detailing), SOFiCAD DATA-EXCHANGE Keywords: alignment; http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 391 392 393 394 395 396 397 Seite 44 von 50 bridge; building; COGO (Coordinate Geometry); computational fluid dynamics (CFD); parametric capabilities; pile; reinforcement detailing; soil-structure interaction; steel detailing; structural FEA; tunneling Soft Burn SoftBurn is a CNC Plate Burner Software that Scans virtually any Connection Material sheet or P sheet of plates detailed for fabrication Soft Burn will scan (read) these drawings of plates, and create full scale DXF or DSTV files for the CNC plate burner These DXF and DSTV files can then be read in by the CNC plate burning software completely eliminating the need to program the plates manually in the shop Input: Autocad Drawings - Soft Burn will read virtually any DWG or DXF file, typically created by Autocad or other software packages as input The Connection Material drawing, or P sheet, can consist from one to any number of plates, but should just be connection material, not a full shop drawing of a Column or Beam The plates on these drawings have to be drawn to some scale (example, inch scale), and each plate can be drawn to a different scale if needed Output: DXF output Files - The DXF output file generated by SoftBurn will be the full scale drawing of the plate, with all inside corners radiused The layer used for the plate outline is user defined, typically PLASMA or CUT The holes will be drawn in layer PUNCH1, PUNCH2, or PUNCH3, as each of these layers define a hole or tool diameter, and are user defined These DXF files will be easily read into the software used on your CNC plate burner The DSTV output file generated by SoftBurn are the industry standard DSTV file, and includes all the properties required in the DSTV file including the plate grade, quantity, properties, etc All inside corners will be radiused, and the plate profile and holes will be accurately reported as well These DSTV files will be easily read into and software requiring DSTV files Keywords: CNC; steel Soft Steel Soft Steel is a three dimensional Structural Steel Detailing Software for any type of structural steel project Embedded built-in AutoCAD commands and extensive use of ARX Technology results in a powerful yet intuitive way to operate with a sophistication of results This detailing software automatically produces structural steel fabrication drawings quickly, accurately and efficiently Soft Steel has been designed with simplicity of operation in mind so that the user requires no special skills to run the system Keywords: autocad; CNC; steel; steel detailing Softscan SoftScan is a generic Bill of Material scanner designed to read data from various CAD systems (such as DWG or DXF) and to export them into many other output formats Also creates a suite of reports based on the bill of material Exports: Steel2000, KISS Files, Structural Software, Microsoft Excel, EJE, Romac Inputs: 3D Cad/SmartKad, DWG/DXF Special Fields: Revisions, Sequences, Pay Code, Finishes Reports: Bill of Material, Connection Material List, Connection Material Order List, Connection Material Reference, Main Material Cutting List, Main Material Nesting, Main Material Order List, Main Material Order List with Marks, Fiel Bolt Summary, Field Bolt Placement Keywords: estimate; steel; steel detailing Software Advice - Construction Software Construction Software Advice is a free online resource dedicated to helping contractors, engineers, and architects find the right software for their businesses It offers profiles and comparisons of the leading products, and provides buyer's guides with best practices for researching and selecting construction software Keywords: construction Software by NYacad, Inc Collection of programs for AutoCad by NYacad includes: SolidStructural - 3D steel autodetailing system; ACAD Officer; SDS Macro VA; Hatch Fast; SDS-DXF convert; etc Keywords: steel; steel detailing SoilClass SoilClass can assist the design engineer to determine estimates of the required soil design parameters (cohesion, friction angle, CBR, unit weight, ), its suitability for various purposes (such as base course or foundation) and requirements for compaction It also provides narrative description of the soil SoilClass in not merely a soil classification (Unified System & AASHTO) software developed for a laboratory technician Keywords: soil classification SOLAIO 2000 Analysis and design of floor slabs made of reinforced and prestressed concrete Keywords: floor; prestressed concrete; reinforced concrete http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 45 von 50 398 Solibri Model Checker Solibri Model Checker is a software tool that analyzes Building Information Models for integrity, quality, and physical security Solibri Model Checker Xrays the building model and reveals potential flaws and weaknesses in the design, highlights the clashing components and checks that the model complies with the building codes and organization's own best practices Keywords: Building Information Modeling; conflict review 399 Solid Structural 3D steel auto detailing, AutoCad-based software for structural steel and stairs Steel framing and anchor bolt plans, elevations, shop drawings, and reports generated in auto regime Keywords: steel; steel detailing 400 SolidWorks 3D mechanical design software Keywords: assembly components; assembly motion; mechanical assembly 401 SOLVIA Finite element system for linear and nonlinear analysis of displacements, stresses and temperatures under static or dynamic conditions Keywords: 402 SpaceClaim SpaceClaim provides the world's first Natural 3D Design system that empowers any product development contributor to design their products faster than ever before With SpaceClaim's intuitive 3D design system and streamlined interface, what you see is what you get Keywords: visualization 403 SPECTR Legacy software from 1972 that evaluates dynamic response spectra at various periods and presents the results as a log-log plot Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley SPECTR: Spectra Response Analysis Donovan, Neville C Dames and Moore, San Francisco, California, Modified: T.F Blake, Newbury Park, California [PC DOS version] 1990., 1972, The program evaluates dynamic response spectra at various periods and presents the results as a log-log plot On the basis of a given timeacceleration record, the program numerically integrates the normal convolution time integral for various natural periods and desired damping ratios Relative displacements, relative and pseudo-relative velocities, absolute and pseudo-absolute accelerations are computed for natural periods from 01 seconds to 100 seconds The program provides tables of displacement, velocity, and acceleration values with three measures of spectral intensity A printer plot of desired damping ratios of the pseudo-relative velocity vs natural period is presented on a inch by inch log-log grid Keywords: response spectrum; seismic 404 Spread Footing (Fine) Program allows to design footings subjected to general loading It computes bearing capacity, settlement and rotation of a footing and determine the required longitudinal and shear reinforcement.Spread footing program is a part of a geotechnical software suite GEO5 It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication Keywords: bearing capacity; footing; settlement 405 Spreadsheets by Antolin Martinez Excel spreadsheets for beam analysis, gravity dam analysis for hydrostatic and hydrodynamic loads, stresses in ducts, beam on elastic foundation, and frame analysis Keywords: beam; beam on elastic foundation; dam 406 Spreadsheets by Smith Canal Software Company Collection of Excel spreadsheets for structural analysis and design: (1) concrete column design, (2) wood member design, (3) concrete beam design, (4) unit conversion tool, and (5) equation solver Keywords: concrete column 407 Spreadsheets for Bridge Design Collection of 14 Excel spreadsheets for (1) loading and analysis; (2) concrete design; (3) steelwork design; (4) composite design; and (5) geometry calculations Keywords: arch; bar list; influence line; section loss; section properties; spreadsheet 408 SSDCP AutoCAD-based product for making structural and miscellaneous steel fabrication drawings, plate-work details, anchor bolt plans, erection plans, e-sheet sections, and more Drawings follow AISC standards Detail beams, columns, bracing, stairs, handrails, frames, tilt-up panels, and full-size shop templates Keywords: steel; steel detailing 409 STAAD STAAD is structural engineering software for 3D model generation, analysis and multi-material design Capabilities for static, dynamic, or pushover analysis of bridges, containment structures, embedded structures (tunnels and culverts), pipe racks, steel, http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 410 411 412 413 414 415 416 417 418 Seite 46 von 50 concrete, aluminum or timber buildings, transmission towers, stadiums or any other simple or complex structure Contains the following modules: STAAD.Pro STAAD.beava - Bridge Engineering Automated Vehicle Application STAAD.beam - design of composite, noncomposite and partially composite steel beams STAAD.foundation - design of isolated footings, combined footings, strip footings, pile caps and mat foundations STAAD.offshore - design of offshore structures OpenSTAAD - library of functions that can be accessed via the COM (Component Object Model) interface Keywords: analysis suite; beam; bridge; foundation; influence line; influence surface; modal analysis; moving load; soil-structure interaction; stability; static analysis Standard Steel Profiles Standard Steel Profile is a free online application designed to present you all the data you need on standard steel profiles: geometry, mechanical and physical properties and resistance, based on element length and support conditions Keywords: section properties; steel Statics Statics is a mobile software for every engineer (in particular civil or building), architect, Statics and Building science student It is a fast standard beam solver (simply supported, cantilever and inclined beams loaded with forces, moments and distributed loads) that calculates moments, shears, axial forces, rotations and lowerings by simply inserting input parameters (many of them are also suggested by the program itself, like Young's modulus or material's weight) It's also possible calculate the area moment of inertia for rectangular sections The program also has a list of all standard equations used to solve the beams, so you can easily know what is the general equation for every case! A lot of other beams solution will be added in the future, with more language localizations Keywords: beam; beam analysis; statics Steel Proportioning of steel cross-sections and members according to the EC3 standard Evaluation of buckling, lateral buckling, weakening, and slenderness Program can be run either independently or as a design module of static analysis program Keywords: steel Steel Fire Calculates fire resistance, in minutes, of steel cross-sections and members according to the EC3 standard Can evaluate unprotected components and components with fire protection, such coatings, spray coatings or protection tubs Can be used independently or as a module of static analysis program Keywords: fire resistance; steel Steel for iPhone and iPod Touch Steel for iPhone & iPod Touch is an application for Civil and Structural Engineers, Architects and Drafters It Provides access to the American Institute of Steel Construction 13.0 and 13.0H steel shapes database The application contains the steel shapes appearing in the following American Institute of Steel Construction (AISC) libraries: (1) Current Version 13 (in English and metric units); (2) LRFD 1st to 3rd Ed (including LRFD 2nd Ed SI - International Units); (3) ASD 6th to 9th Ed.; and HISTORIC Steel for iPhone allows sorting of the sections within a library given a specific property It also lets you find a section with a quick search function, where, for example, "W16 x 89", "W16x89" or simply "W1689" will locate the same section or its closest approximation Keywords: section properties; steel Steel Joints Determines capacity of steel joints for truss and frame structures fabricated from rolled or welded plate members Determines rigidity of the connection and performs its classification (rigid joint, semi-rigid joint, or hinge) Keywords: steel connection Steel Utilities Online Library of user-submitted steel software maintained by Modern Steel Construction Keywords: steel SteelCAD Automated steel detailing and fabrication software Complies with AISC and CISC standards Produces erection drawings and generates design calculations Shop-ready drawings Details most structural beams, columns, vertical and horizontal bracing, stairs, and ladders Any member made from almost any structural shape Keywords: steel; steel detailing SteelPlus Detailing Bundle Suite of steel detailing and drafting applications that work with AutoCad Includes structural shapes, bolts/nuts/washers, joists and girders, steel floor and roof deck, and welding symbols Databases include AISC, MAISC, and CISC Keywords: steel detailing http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 47 von 50 419 STEELS Plus Reference utility for the properties of structural steel shapes, both current and historical, used in the United States Access section information as published in the American Institute of Steel Construction (AISC) database Includes W, M, S, HP, C, MC, L, WT, MT, ST, HSS, 2L & PIPES shapes in both English and SI systems Contains the geometric and mechanical properties for more than 3800 shapes (1900+ for each unit system) Enables to find sections based on specific criteria and browse for all sections, view equivalent sections between English/SI systems Keywords: section properties; steel 420 STLBRIDGE Continuous Steel Bridge Design Keywords: bridge; steel concrete composite beam 421 Strand7 Finite element analysis system for aeronautical, automotive, biomedical, civil, geotechnical, mechanical, naval architecture, structural and transportation disciplines Keywords: aeronautical FEA; automotive FEA; biomedical FEA; civil FEA; geotechnical FEA; mechanical FEA; naval FEA; structural FEA; transportation FEA 422 STRAP Structural, civil and bridge engineering software Keywords: bridge FEA; civil FEA; structural FEA 423 StruCalc for Windows StruCalc is intuitive structural analysis and design program that enables to quickly size beams, columns, and footings Keywords: beam analysis; beam design 424 SureTrack Compact program from project management Keywords: project management; scheduling 425 Tango Program for the analysis of bridges that takes into account the actual procedure of bridge construction Tango can analyze the following types of bridges: (1) steel bridges; (2) concrete post-tensioned segmental bridges; (3) concrete composite bridges - precast girders with cast-in-place deck; (4) steel/concrete composite bridges; (5) cable-stayed bridges Tango can analyze the following construction sequences: (1) cantilever construction - castin-place or precast; (2) incremental launching; (3) cable-stayed; (4) span-by-span erection; (5) precast girder and deck as composite Developed by Dr Man-Chung Tang, who pioneered in many sound and innovative techniques in the design and construction of bridges Keywords: bridge; cable-stayed bridge; segmental bridge 426 TEDDS Electronic "calculation pad" for repetitive structural engineering calculations Available as TEDDS Engineering Library (standalone program) or as TEDDS for Word for integration into MS Word documents Keywords: calculations pad 427 Tekla Structures Fully integrated 3D solution that enables creation and management of complete 3D building models regardless of material or structural complexity The Tekla Structures solution covers the whole structural design process from conceptual design to detailing, and to construction Tekla Structures now integrates XSteel, which was earlier an independent program for steel detailing Keywords: balanced cantilever bridge; Building Information Modeling; conceptual design; concrete; erection; fabrication; steel 428 TheStructuralEngineer.info Software Listing The software directory includes programs, spreadsheets and web applications on analyses of beams, frames, plates, bridge, design of steel and concrete as well as other related fields Keywords: beam; concrete; FEA (finite element analysis); frame; plate; seismic; steel 429 Timber Design Written in cooperation with The Engineered Wood Society (APA-EWS), this structural engineering software program analyzes, designs or checks continuous beams or columns with optional cantilevers, simple supports or fixed ends, and handles most any type of loading conditions as well Load generation is as easy as simply typing in your zip code Keywords: timber; timber beam 430 Tk Solver Mathematical equation solver, programming and analysis environment Keywords: equation; solver 431 TRAP Truss rating and analysis program Keywords: 432 Trix Organizer Trix Organizer is a SQL Server based software for controlling and versioning drawings and documents Files and all associated metadata are securely stored inside the SQL Server database This ensures that files cannot be accidently duplicated or changed Keywords: document management http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 48 von 50 433 TRNSYS TRNSYS (The Transient Energy System Simulation Tool) is a program to simulate the transient performance of thermal energy systems Keywords: building; energy analysis; leed; thermal 434 TrueViz Transport TrueViz(R) Transport is an integrated system of software and procedures that enhances interactive visualization for design analysis and public involvement The software's code converts linear point-based data found in design output to a series of mathematically defined curves and surfaces This innovative approach of point-to -curve conversion greatly reduces the amount of data required to convert design files to 3-D Simply put, TrueViz(R) Transport makes it possible for designers to translate computeraided design and drafting (CADD) drawings into 3-D visualizations in much less time and with more accuracy As a result, HNTB is able to present its clients and their stakeholders with more realistic imagery of design alternatives and efficiently incorporate changes before work begins Keywords: vizualization 435 Truss 2000 Software for the analysis of planar or spatial truss structures Allows local elastic and instability testing of the single bar and the testing of the global stability of the whole structure, evaluating the loss of bearer capacity due to any geometrical or load imperfections Keywords: stability; truss 436 Tunnel 2H Tunnel-2H is software for design of Concrete Box Culverts using AutoCAD 2002-2010 A box culvert is a concrete unit with a clear opening of rectangular shapes which may have internal splayed corners Load combinations are considered at maximum and minimum fill depths Surface load, field loading, railway loading and highway loading according to IL Standard 1227 Output provides maximum and minimum horizontal loads from fill pressure are assessed by the principles of soil mechanics from the surface load and the depth of fill Performs design and detailing of sections to resist moments and shear forces are in accordance with IL Standard 466 Result envelopes can be obtained for deflections, moments, shear and axial forces, and external and internal reinforcement Compatible with the Israel Standards 466 and 1227 Mostly compatible with the Great Britain -Box Culvert Association Standard Specification 1991 "Precast Concrete Box Culverts", April 1991 edition Keywords: box culvert; concrete 437 UTrAp UTrAp is a software package developed for pour sequence analysis of curved, trapezoidal steel box girders Single and dual girder systems with a constant radius of curvature can be analyzed with this program The software consists of a Graphical User Interface (GUI) and an analysis module The analysis module relies on the finite element method to compute the response of a three-dimensional bridge structure Input data is supplied to the program through use of a GUI The program can handle multiple analysis cases and has graphics capability to visualize the output It also offers the capability of performing an eignevalue buckling analysis, and it allows for exporting results to Excel Keywords: box girder bridge; bridge; buckling; pour sequence; stability; steel girder 438 VABS Variational Asymptotical Beam Sectional Analysis (VABS) is a unique tool capable of realistic modeling of initially curved and twisted anisotropic beams with arbitrary sectional topology and materials Relative to 3D analyses, two to three orders of magnitude in computing time can be saved using VABS, with little loss of accuracy The advantages of VABS over other technologies have been clearly demonstrated by virtue of its generality, accuracy, and efficiency Keywords: composite beam; composite material; fiber reinforced polymer 439 VersaFrame Frame analysis and design program with integrated concrete beam, concrete column and plate design Keywords: concrete; concrete beam; concrete column; eigenvalue analysis; frame analysis; linear analysis; modal analysis; P-delta analysis; slab; static analysis 440 Virtis Bridge load rating program Keywords: bridge; load rating 441 Virtual Construction Suite of technologies that employs 3D modeling to virtually construct the project It identifies constructability issues during design and/or preconstruction The 3D model is further utilized to extract accurate estimating quantities and to analyze alternative construction sequences Finally, design (3D), schedule (4D) and http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 442 443 444 445 446 447 448 449 450 451 Seite 49 von 50 cost (5D) are all interlinked, so a change to any of the three automatically updates the other two Keywords: construction; project management; scheduling VisionREZ VisionREZ is a software for Residential Building Information Modeling (BIM) that creates coordinated 3D models, construction documents, framing, graphic renderings, animations, and bill of materials The platform includes roof object and is powered by Autodesk technology Keywords: building; CADD; estimate VisualAnalysis Easy to use frame and finite-element tool Keywords: VisualFoundation VisualFoundation automates much of your work involved in designing complex mat footings All you need to is specify the locations, sizes, materials and loading and VisualFoundation will take care of the finite-element details and analyze your footing slab to determine moments, shears, displacements and bearing pressures Footing demand/capacity ratios (unity checks) are performed to ensure that your slab passes for IBC 2006/ACI 318 requirements and steel requirements for the slab are provided Keywords: footing; foundation; foundation design WALLAP Comprehensive software for design of retaining walls Keywords: retaining wall; sheeting WBLF (Washington Bridge Foundation Libraries) Programmable software components that can be used in spreadsheets and MathCAD documents Reusable C++ libraries for bridge engineering applications Keywords: bridge; C++ Wind Analysis Structural engineering wind software designed to calculate design wind pressures using ASCE's "Minimum Design Loads for Buildings and Other Structures" Wind Analysis completely automates the ASCE calculations Wind Analysis is available for ASCE 7-95, ASCE 7-98, ASCE 7-02 and ASCE 7-05 The program follows the ASCE code "to the letter" - each figure and table is coded into the program so closely that the ASCE publication can be used as an operator's manual for the program This wind software program is easy to learn and quick to use because intelligent dialog boxes guide the user through the input process Keywords: wind WoodWorks Sizer WoodWorks Sizer enables one to size beams, joists, columns and wall studs to meet the CSA O86-01 Standard (Candadian version) or 2005 National Design Specification (NDS) for Wood Construction (US Version) It has the following features: * Specify dead, live, snow and wind loads * Automatically pattern loads * Generate a materials take-off summary based on your design * Design for point, line, area, triangular, and trapezoidal loads simultaneously * Automatically check all load combinations as per [CAN: NBCC 1995] [USA: IBC 2003, ASCE 7-02, UBC 1997] * Analyze the critical load cases for reactions at supports, shear, bending, and deflection * Generate detailed analysis reports and diagrams * Generate a list of acceptable sections for dimension lumber, heavy timbers, glulam, LVL, PSL, or I-joists * Use the Materials Database editor to customize the software to your needs Keywords: beam; column; glulam; timber; wood xc Open source finite element program for the analysis of structures Written in C++ Keywords: cable-stayed bridge; FEA (finite element analysis) Xcalcs Online engineering calculation sheets for beams, plates, vessels, etc Keywords: beam; buckling; column; online calculator; plate; stability; vessel YieldLine Analysis YieldLine Analysis program is based on Yield Line Theory to analyse quadrilateral orthotropic slabs, supported on two, three or four sides It uses the equilibrium method to identify critical yield pattern and a work solution to calculate the collapse load and design moments in a slab The program can substantially cut down the design time in identifying the critical yield pattern The accuracy of the final solution can be refined depending on the fineness of the grid The program can be used to assess the effects of various assumed yield line patterns It can also assist in understanding that virtual work method solution converges more rapidly than the equilibrium method YieldLine Analysis is a fully integrated analysis tool You can create, analyse and display data without leaving YieldLine Analysis environment Keywords: reinforced concrete; slab; yield line analysis http://www.bridgeart.net/software_database/index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] http://www.bridgeart.net/software_database/index_en.php Seite 50 von 50 14.10.2010 ... http://www.bridgeart.net /software _database/ index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite 19 von 50 134 DesconWin DesconWin is a software program for... http://www.bridgeart.net /software _database/ index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] Seite von 50 25 Advanced Column Program Interactive design of reinforced... non-linear analysis of structures A wide spectrum of http://www.bridgeart.net /software _database/ index_en.php 14.10.2010 Database of Structural Engineering Software [ www.bridgeart.net ] 38 39 40 41 42

Ngày đăng: 01/05/2018, 10:09

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan