Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 101 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
101
Dung lượng
4,3 MB
Nội dung
average normal stress in each rod and the average shear stress in the pin A between the members V Strain 5.1 Deformation F2 F1 F3 F4 V Strain F2 5.2 Strain F3 F1 5.2.1 Normal strain AB AB AB AB F4 V Strain 5.2.2 Shear Strain V Strain 5.2.3 Cartesian strain The approximate lengths of the sides of the parallelepiped are 1 x x 1 y 1 z y z The approximate angles between sides, again originally defined by the sides Δx, Δy and Δz are xy yz xz V Strain 5.2.3 Cartesian strain Notice that the normal strains cause a change in volume of rectangular element, whereas the shear strain cause a change in shape V Strain Example: Due to a loading, the plate is deformed into the dashed shape shown in fig a Determine (a) the average normal strain along the side AB, and (b) the average shear strain in the plate at A relative to the and y axes V Strain Solutions Part (a) • Line AB, coincident with the y axis, becomes line after deformation, thus the length of this line is AB ' 250 22 32 248.018 mm • The average normal strain for AB is therefore AB avg AB ' AB 248.018 250 7.93 10 3 mm/mm (Ans) AB 240 • The negative sign indicates the strain causes a contraction of AB V Strain Solutions Part (b) • As noted, the once 900 angle BAC between the sides of the plate, referenced from the x, y axes, changes to θ’ due to the displacement of B to B’ • Since xy ' then xy is the angle shown in the figure • Thus, xy arctg 0.121 rad (Ans) 250 V Strain Problem: The rigid beam is supported by a pin at A and wires BD and CE If the load P on the beam causes the end C to be displaced 10 mm downward, determine the normal strain developed in wires CE and BD ... The approximate lengths of the sides of the parallelepiped are 1 x x 1 y 1 z y z The approximate angles between sides, again originally defined by the sides Δx, Δy and Δz are... thus the length of this line is AB ' 250 22 32 248. 018 mm • The average normal strain for AB is therefore AB avg AB ' AB 248. 018 250 7.93 10 3 mm/mm (Ans) AB 240 • The. .. ' then xy is the angle shown in the figure • Thus, xy arctg 0 .12 1 rad (Ans) 250 V Strain Problem: The rigid beam is supported by a pin at A and wires BD and CE If the