1.1 Turning on the Power
1.2 Transmitter ON
1.3 Control Description
1.4 CRT Brilliance
1.5 Control Panel Backlighting
1.6 Tuning the Receiver
1.7 Degaussing the Screen
1.8 Initializing the Compass Readout
1.9 Entering Own Ship's Speed
1.10 On-screen Legends and Markers
1.11 Presentation Modes
1.12 Selecting the Range Scale
1.13 Selecting the Pulselength
1.14 Adjusting the Sensitivity
1.15 Suppressing Sea Clutter
1.16 Suppressing Precipitation Clutter
1.17 Interference Rejector
1.18 Measuring the Range
1.19 Measuring Bearing
1.20 Collision Assesment by the Offset EBL
1.21 Measuring Range and Bearing Between Two Targets
1.22 Setting a Target Alarm Zone
1.23 Off-centering (shift)
1.24 Echo Averaging
1.25 Electronic Plotting Aid (EPA)
1.26 Target Trails (Echo Trails)
1.27 Parallel Index Lines
1.28 Reference Mark (not available with Video Plotter RP-17 or RP-180)
1.29 Zoom (R-type only)
1.30 Markers
1.31 Suppressing Second-trace Echoes
1.32 [F1] Key
1.33 [F2] Key
1.34 FUNCTION Key
1.35 Adjusting Brillliance of Screen Data
1.36 Echo Stretch, Contrast, Enhanced Video
1.37 Watch Timer
1.38 Noise Rejector
1.39 Navigation Data
1.40 Alarm Output (R-type only)
1.41 Outputting Target Position (R-type only)
1.42 Degaussing Interval
1.43 Background Color
1.44 Clutter Sweep
1.45 Day, Night Brilliance
1.46 Contrast
1.47 Radar Map (RP-17 or RP-180 required)
1.48 Alarms
1.49 Enlarging Close-in Targets (R-type only)
1.50 A/D Converter Curve Setting (R-type only)
1.51 Echo Area (R-Type only)
1.52 Real Time Heading Up (R-type only)