ASME BPVCode III 2015 d3 containments for transportation

R ules for Construction of Nuclear Facility Components 2015 ASME Boiler and Pressure Vessel Code An International Code Div ision Containments for Transpor tation and Storage of Spent Nuclear Fuel and High Level Radioactive Material and Waste This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom SECTION III Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) ASME BPVC.I I I 3-2015 No fu 2015 ASME Boiler & Pressure Vessel Code 2015 Edition July 1, 2015 III RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS ASME Boiler and Pressure Vessel Committee on Nuclear Power Two Park Avenue • New York, NY • 10016 USA This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Division Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive Material and Waste Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) AN INTERNATIONAL CODE No fu This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals The endnotes and preamble in this document (if any) are part of this American National Standard ASME collective membership mark Certification Mark “ASME” is the trademark of The American Society of Mechanical Engineers No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher Library of Congress Catalog Card Number: 56-3934 Printed in the United States of America Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015 The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990 Copyright © 2015 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom The above ASME symbol is registered in the U.S Patent Office Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) Date of Issuance: July 1, 2015 No fu List of Sections Foreword Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising Statement of Policy on the Use of ASME Marking to Identify Manufactured Items Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees Personnel Organization of Section III Summary of Changes List of Changes in Record Order Number Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code xii xiv xvi xvi xvii xix xxxvi xxxix xlii xliii General Requirements Article WA-1000 WA-1100 WA-1110 WA-1120 WA-1130 WA-1140 WA-1150 WA-1200 WA-1210 WA-1220 WA-1230 Scope of Division Scope Nature of These Rules and Containments to Which They Are Applicable Definitions Limits of These Rules Use of Code Editions, Addenda, and Cases Units of Measure General Requirements Valves Materials Parts 1 1 1 2 2 Article WA-2000 WA-2100 WA-2110 WA-2120 WA-2130 Design Basis for Containments General Requirements Scope Design Basis Special Requirements 3 3 Article WA-3000 WA-3100 WA-3110 WA-3120 WA-3130 WA-3300 WA-3320 WA-3330 WA-3340 WA-3350 WA-3360 WA-3370 WA-3380 WA-3390 WA-3400 WA-3420 WA-3430 WA-3440 WA-3450 WA-3460 Responsibilities and Duties General Responsibilities Vs Legal Liabilities Authorization Welding and Subcontracting of Welding Responsibilities of an N3 Certificate Holder Categories of the N3 Certificate Holder’s Responsibilities Obtaining a Certificate Compliance With This Division Design Documents Fabrication Specification Responsibility for Quality Assurance Data Reports N3 Certificate Holder’s Responsibility for Records Responsibilities of an NPT Certificate Holder Categories of an NPT Certificate Holder’s Responsibilities Obtaining a Certificate Compliance With This Division Responsibility for Quality Assurance Documentation of Quality Assurance Program 5 5 6 7 9 9 9 9 10 iii This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Subsection WA Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) TABLE OF CONTENTS No fu 10 10 10 10 Article WA-4000 WA-4100 WA-4110 WA-4120 WA-4130 Quality Assurance Requirements Scope and Applicability Definitions Establishment and Implementation 11 11 11 11 11 Article WA-5000 WA-5100 WA-5110 WA-5120 WA-5130 WA-5200 WA-5210 WA-5220 WA-5230 WA-5240 WA-5250 WA-5260 WA-5270 WA-5280 WA-5290 WA-5300 Authorized Inspection Introduction Applicability Performance of Inspection Access for Inspection Agency Personnel Duties of Inspector General Inspection Duties Categories of Inspector’s Duties Scope of Work, Design Specifications, Design Reports, and Fabrication Specifications Quality Assurance Programs Qualification Records Materials, Parts, and Heat Treatment Examinations and Tests Final Tests Data Reports Responsibilities of the Authorized Inspection Agency 13 13 13 13 13 13 13 14 14 14 14 15 15 15 15 15 Article WA-7000 WA-7100 Reference Standards General Requirements 16 16 Article WA-8000 WA-8100 WA-8110 WA-8120 WA-8130 WA-8140 WA-8150 WA-8160 WA-8170 WA-8180 WA-8200 WA-8210 WA-8220 WA-8230 WA-8300 WA-8310 WA-8330 WA-8400 WA-8410 Certificates of Authorization, Nameplates, Certification Mark, and Data Reports Authorization to Perform Code Activities General Scope of Authorization Inspection Agreement Required Quality Assurance Program Requirements Application for Authorization Evaluation for Authorization Issuance of Authorization Renewal of Authorization Nameplates and Stamping With Certification Mark General Requirements Nameplates Nameplates for Certification Mark with NPT Designator Items Certification Mark General Requirements Removable Items Data Reports General Requirements 18 18 18 18 18 19 19 19 19 19 19 19 20 20 20 20 21 21 21 Article WA-9000 WA-9100 WA-9200 Glossary Introduction Definitions 27 27 27 Class TC Transportation Containments 29 Introduction Scope Rules for Class TC Transportation Containments 29 29 29 Subsection WB Article WB-1000 WB-1100 WB-1120 iv This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Data Report Metallic Material Scope and Applicability Material Organizations Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WA-3470 WA-3800 WA-3810 WA-3820 No fu 29 31 31 31 31 32 32 32 33 33 33 33 33 33 WB-2300 WB-2310 WB-2320 WB-2330 WB-2340 WB-2350 WB-2360 WB-2400 WB-2410 WB-2420 WB-2430 WB-2440 WB-2500 WB-2510 WB-2520 WB-2530 WB-2540 WB-2550 WB-2570 WB-2580 WB-2600 WB-2610 WB-2700 Material General Requirements for Material Scope of Principal Terms Employed Containment Material Certification of Material Welding Material Material Identification Deterioration of Material in Service Heat Treatment to Enhance Impact Properties Procedures for Heat Treatment of Material Material Not Performing a Containment Function Material Test Coupons and Specimens for Ferritic Steel Material and Ductile Cast Iron Heat Treatment Requirements Procedure for Obtaining Test Coupons and Specimens for Quenched and Tempered Material and for Ductile Cast Iron Fracture Toughness Requirements for Material Material to Be Toughness Tested Impact Test Procedures Test Requirements and Acceptance Standards Number of Toughness Tests Required Retests Calibration of Instruments and Equipment Welding Material General Requirements Required Tests Weld Metal Tests Storage and Handling of Welding Material Examination and Repair of Containment Material Examination of Containment Material Examination After Quenching and Tempering Examination and Repair of Plate Examination and Repair of Forgings and Bars Examination and Repair of Seamless and Welded Tubular Products and Fittings Examination and Repair of Cast Products Examination of Bolts, Studs, and Nuts Material Organization’s Quality System Programs Documentation and Maintenance of Quality System Programs Dimensional Standards Article WB-3000 WB-3100 WB-3110 WB-3120 WB-3130 WB-3200 WB-3210 WB-3220 WB-3230 WB-3240 WB-3250 WB-3260 WB-3700 Design General Design Loading Criteria Special Considerations General Design Rules Design of Containments Design Criteria Stress Limits for Other Than Bolts Stress Limits for Bolts Nozzles or Openings Design of Welded Construction Special Containment Requirements Strain-Based Acceptance Criteria 54 54 54 55 55 59 59 62 72 73 74 77 77 Article WB-4000 WB-4100 WB-4110 Fabrication General Requirements Introduction 79 79 79 Article WB-2000 WB-2100 WB-2110 WB-2120 WB-2130 WB-2140 WB-2150 WB-2160 WB-2170 WB-2180 WB-2190 WB-2200 WB-2210 WB-2220 v 34 35 35 35 36 38 39 39 39 39 39 40 42 43 43 43 43 45 47 50 51 53 53 53 This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Boundaries of Jurisdiction Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WB-1130 No fu 79 80 80 80 81 84 84 87 87 91 92 95 95 95 96 97 99 99 99 109 109 109 109 Article WB-5000 WB-5100 WB-5110 WB-5120 WB-5130 WB-5140 WB-5200 WB-5210 WB-5220 WB-5230 WB-5240 WB-5260 WB-5270 WB-5300 WB-5320 WB-5330 WB-5340 WB-5350 WB-5400 WB-5410 WB-5500 WB-5510 WB-5520 WB-5530 Examination General Requirements for Examination Procedures, Qualifications, and Evaluation Time of Examination of Welds and Weld Metal Cladding Examination of Weld Edge Preparation Surfaces Examination of Adjacent Base Material Required Examination of Welds Category A Welded Joints Category B Welded Joints Category C Welded Joints Category D Welded Joints Fillet, Partial Penetration, Socket, and Attachment Welded Joints Special Welded Joints Acceptance Standards Radiographic Acceptance Standards Ultrasonic Acceptance Standards Magnetic Particle Acceptance Standards Liquid Penetrant Acceptance Standards Final Examination of Containments Examination After Hydrostatic Test Qualifications and Certification of Nondestructive Examination Personnel General Requirements Personnel Qualification, Certification, and Verification Records 110 110 110 110 112 112 112 112 112 112 112 113 113 113 113 114 114 114 114 114 115 115 115 116 Article WB-6000 WB-6100 WB-6110 WB-6120 WB-6130 WB-6200 WB-6210 WB-6220 Testing General Requirements Scope Testing of Containments Preparation for Testing Hydrostatic Tests Hydrostatic Test Procedure Hydrostatic Test Pressure Requirements 117 117 117 117 117 118 118 118 vi This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Certification of Materials and Fabrication by Certificate Holder Repair of Material Forming, Fitting, and Aligning Cutting, Forming, and Bending Forming Tolerances Fitting and Aligning Requirements for Weld Joints in Containments Welding Qualifications General Requirements Welding Qualifications, Records, and Identifying Stamps General Requirements for Welding Procedure Qualification Tests Rules Governing Making, Examining, and Repairing Welds Precautions to Be Taken Before Welding Rules for Making Welded Joints Welding of Attachments Repair of Weld Metal Defects Heat Treatment Welding Preheat Requirements Postweld Heat Treatment Heat Treatment of Welds Other Than the Final Postweld Heat Treatment Mechanical Joints Bolting and Threading Bolting Flanged Joints Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WB-4120 WB-4130 WB-4200 WB-4210 WB-4220 WB-4230 WB-4240 WB-4300 WB-4310 WB-4320 WB-4330 WB-4400 WB-4410 WB-4420 WB-4430 WB-4450 WB-4600 WB-4610 WB-4620 WB-4630 WB-4700 WB-4710 WB-4720 No fu 118 118 118 119 119 119 119 119 119 119 Article WB-8000 WB-8100 Nameplates, Stamping With Certification Mark, and Reports General Requirements 120 120 Class SC Storage Containments 121 Article WC-1000 WC-1100 WC-1120 WC-1130 Introduction Scope Rules for Class SC Containments Boundaries of Jurisdiction 121 121 121 121 Article WC-2000 WC-2100 WC-2110 WC-2120 WC-2130 WC-2140 WC-2150 WC-2160 WC-2170 WC-2180 WC-2190 WC-2200 WC-2210 WC-2220 Material General Requirements for Material Scope of Principal Terms Employed Containment Material Certification of Material Welding Materials Material Identification Deterioration of Material in Service Heat Treatment to Enhance Impact Properties Procedures for Heat Treatment of Material Attachment Material Material Test Coupons and Specimens for Ferritic Steel Material and Ductile Cast Iron Heat Treatment Requirements Procedure for Obtaining Test Coupons and Specimens for Quenched and Tempered Material and for Ductile Cast Iron Fracture Toughness Requirements for Material Material to Be Impact Tested Impact Test Procedures Test Requirements and Acceptance Standards Number of Impact Tests Required Retests Calibration of Instruments and Equipment Welding Material General Requirements Required Tests Weld Metal Tests Storage and Handling of Welding Material Examination and Repair of Containment Material Containment Material Examination and Repair of Plate Examination and Repair of Forgings and Bars Examination and Repair of Seamless and Welded (Without Filler Metal) Tubular Products and Fittings Examination and Repair of Tubular Products and Fittings Welded With Filler Metal Examination and Repair of Cast Products Examination of Bolts, Studs, and Nuts 123 123 123 123 124 124 125 125 125 125 125 125 125 Subsection WC WC-2300 WC-2310 WC-2320 WC-2330 WC-2340 WC-2350 WC-2360 WC-2400 WC-2410 WC-2420 WC-2430 WC-2440 WC-2500 WC-2510 WC-2530 WC-2540 WC-2550 WC-2560 WC-2570 WC-2580 vii 126 127 127 128 129 130 131 131 131 131 132 133 135 135 135 135 137 138 140 140 142 This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Pneumatic Tests Pneumatic Testing Procedures Pneumatic Test Pressure Requirements Test Gages Special Test Pressure Situations Containments Designed for External Pressure Testing of Combination Units Leak Testing Helium Leak Testing Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WB-6300 WB-6310 WB-6320 WB-6400 WB-6410 WB-6600 WB-6610 WB-6620 WB-6700 WB-6710 No fu 142 142 142 Article WC-3000 WC-3100 WC-3110 WC-3120 WC-3130 WC-3200 WC-3210 WC-3220 WC-3230 WC-3250 WC-3260 WC-3700 Design General Design Loading Criteria Special Considerations General Design Rules Design Rules for Containments General Requirements Design Consideration Openings and Reinforcement Design of Welded Construction Special Containment Requirements Strain-Based Acceptance Criteria 143 143 143 144 144 147 147 151 154 158 161 162 Article WC-4000 WC-4100 WC-4110 WC-4120 WC-4130 WC-4200 WC-4210 WC-4220 WC-4230 WC-4260 WC-4300 WC-4310 WC-4320 WC-4330 WC-4400 WC-4410 WC-4420 WC-4430 WC-4450 WC-4500 WC-4510 WC-4520 WC-4530 WC-4540 WC-4600 WC-4610 WC-4620 WC-4630 WC-4700 WC-4710 WC-4720 Fabrication General Requirements Introduction Certification of Materials and Fabrication by Certificate Holder Repair of Material Forming, Cutting, and Aligning Cutting, Forming, and Bending Forming Tolerances Fitting and Aligning Requirements for Weld Joints in Containments Welding Qualifications General Requirements Welding Qualifications, Records, and Identifying Stamps General Requirements for Welding Procedure Qualification Tests Rules Governing Making, Examining, and Repairing Welds Precautions to Be Taken Before Welding Rules for Making Welded Joints Welding of Attachments Repair of Weld Metal Defects Brazing Rules for Brazing Brazing Qualification Requirements Fitting and Aligning of Parts to Be Brazed Examination of Brazed Joints Heat Treatment Welding Preheat Requirements Postweld Heat Treatment Heat Treatment of Welds Other Than the Final Postweld Heat Treatment Mechanical Joints Bolting and Threading Bolting Flanged Joints 163 163 163 163 164 164 164 165 166 168 170 170 171 172 178 178 179 179 181 183 183 184 184 184 184 184 185 194 195 195 195 Article WC-5000 WC-5100 WC-5110 WC-5120 WC-5130 WC-5140 WC-5200 WC-5210 WC-5220 Examination General Requirements for Examination Procedures, Qualifications, and Evaluation Time of Examination of Welds and Weld Metal Cladding Examination of Weld Edge Preparation Surfaces Examination of Adjacent Base Material Required Examination of Welds Category A Longitudinal Welded Joints Category B Circumferential Welded Joints 196 196 196 196 198 198 198 198 198 viii This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Material Organizations’ Quality System Programs Documentation and Maintenance of Quality System Programs Dimensional Standards Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WC-2600 WC-2610 WC-2700 No fu Article WC-6000 WC-6100 WC-6110 WC-6120 WC-6130 WC-6200 WC-6210 WC-6220 WC-6300 WC-6310 WC-6320 WC-6400 WC-6410 WC-6600 WC-6610 WC-6620 WC-6700 WC-6710 WC-6720 Testing General Requirements Scope Testing of Containments Preparation for Testing Hydrostatic Tests Hydrostatic Test Procedure Hydrostatic Test Pressure Requirements Pneumatic Tests Pneumatic Testing Procedures Pneumatic Test Pressure Requirements Test Gages Special Test Pressure Situations Containments Designed for External Pressure Pressure Testing of Combination Units Leak Testing Helium Leak Testing Containment Closures Article WC-8000 WC-8100 FIGURES WA-8212-1 WB-2433.1-1 WB-2552.1-1 WB-3221-1 WB-3222-1 WB-3224.1-1 WB-3251-1 WB-3252-1 WB-3261-1 WB-4221.1-1 WB-4221.2(a)-1 WB-4221.2(a)-2 WB-4233(a)-1 198 198 199 199 199 200 200 200 200 200 201 201 201 201 201 201 202 203 203 203 203 203 204 204 204 204 204 204 205 205 205 205 205 205 205 205 Nameplates, Stamping With Certification Mark, and Reports General Requirements 207 207 Form of Stamping Weld Metal Delta Ferrite Content Axial Propagation of Sound in Tube Wall Stress Categories and Limits of Stress Intensity for Design Loadings Stress Categories and Limits of Stress Intensity for Normal Loadings Stress Categories and Limits of Stress Intensity for Accident Loadings for Elastic Analysis Welded Joint Locations Typical of Categories A, B, C, and D Typical Butt Joints Categories A and B Joints Between Sections of Unequal Thickness Maximum Difference in Cross‐Sectional Diameters Maximum Permissible Deviation e From a True Circular Form Maximum ARC Length for Determining Plus or Minus Deviation Butt Weld Alignment and Mismatch Tolerances for Unequal I.D and O.D When Items Are Welded From One Side and Fairing Is Not Performed 20 43 48 65 66 ix 70 74 75 78 82 82 83 85 This copy downloaded on 2015-07-14 21:45:42 -0500 by authorized user logan ahlstrom Category C Welded Joints Category D Welded Joints Examination of Containment Closure Welds Fillet, Partial Penetration, Socket, and Attachment Welded Joints Special Welds and Brazed Joints Acceptance Standards Radiographic Acceptance Standards Ultrasonic Acceptance Standards Magnetic Particle Acceptance Standards Liquid Penetrant Acceptance Standards Visual Acceptance Standards for Brazed Joints Final Examination of Containments Examination After Pressure Test Qualifications and Certification of Nondestructive Examination Personnel General Requirements Personnel Qualification, Certification, and Verification Records Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc (www.techstreet.com) WC-5230 WC-5240 WC-5250 WC-5260 WC-5270 WC-5300 WC-5320 WC-5330 WC-5340 WC-5350 WC-5360 WC-5400 WC-5410 WC-5500 WC-5510 WC-5520 WC-5530 No fu .. .2015 ASME Boiler & Pressure Vessel Code 2015 Edition July 1, 2015 III RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS ASME Boiler and Pressure Vessel Committee... by the Society for the Construction of Transportation and Storage Containments and Parts Required LST‐R T N D T Values for Ferritic Steel Material for Containment... Class Components in Elevated Temperature Service* • Division — Code for Concrete Containments • Division — Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive