References References [1] William B Ribbens, Ph.D - Understanding Automotive Electronics (Fifth Edition) ISBN 0-7506-7008-8 - Butterworth–Heinemann [2] T.K GARRETT, CEng, FIMechE, MRAeS; K NEWTON, MC, BSc, ACGI, AMInstCE, MIMechE, Late Assistant Professor, Mechanical and Electrical Engineering Department, The Royal Military College of Science; W STEEDS, OBE, BSc, ACGI, FIMechE, Late Professor of Mechanical Engineering, The Royal Military College of Science - The MotorVehicle (Thirteenth Edition) - ISBN 07506 4449 - Butterworth–Heinemann [3] Thomas D Gillespie – Fundamental of Vehical Dynamics – Society of Automobile Engineers, Inc [4] Hiroshi Yamagata - The science and technology of materials in automotive engines The Institute of Materials, Minerals & Mining - CRC Press - Woodhead Publishing and Maney Publishing [5] Gisbert Lechner, Harald Naunheimer – Automotive Transmission Fundamental, Selection, Design and Application – Springer [6] Prof Dipl.-Ing Jörnsen Reimpell,Dipl.-Ing Helmut Stoll; Prof Dr.-Ing Jürgen W Betzler - The Automotive Chassis: Engineering Principles (Second Edition) - ISBN 7506 5054 - Butterworth-Heinemann [7] Julian Happian-Smith, PhD, MSc, BTech, Cert Ed HE, MSAE - An Introduction to Modern Vehicle Design - ISBN 07506 5044 3- Butterworth-Heinemann [8] Charles White - Automotive Diagnostic Fault Codes Manual – Haynes Techbook Series - Haynes Publishing 1998 [9] Mike Stubblefield & John H Haynes - Heating & Air Conditioning Systems Manual Haynes Publishing Group, Haynes Publications, Inc [10] Bauer H Warrendale - Automotive Handbook (5th edition) - SAE, Society of Automotive Engineers, (2000) [11] Duffy J.E - Auto Engines - New York, The Goodheart-Willcox Company, Inc (1997) [12] Mehrdad Ehsani, Yimin Gao, Sebastien E Gay - Texas A&M University, Ali Emadi, Illinois Institute of Technology - Modern Electric, Hybrid Electric, and Fuel Cell Vehicles Fundamentals, Theory, and Design - CRC PRESS [13] J.B Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill Inc., New York, 1988 Technical English for AUTOMOTIVE ENGINEERING 35