This standard has been published in accordance with a decision taken by CENTC 249 to adopt, without alteration, International Standard ISO 14125 as a European Standard. The responsible German body involved in its preparation was the Normenausschuß Kunststoffe (Plastics Technology Standards Committee), Technical Committee Prepregs. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO Standard DIN Standard ISO 178 DIN EN ISO 178 ISO 291 DIN EN ISO 291 ISO 293 DIN 167701 ISO 2941 DIN EN ISO 2941 ISO 295 DIN 53451 ISO 2818 DIN EN ISO 2818 ISO 3167 DIN EN ISO 3167
June 1998 D EUTSCHE NORM Fibre-reinforced plastic composites Determination of flexural properties (ISO 14125 : 1998) English version of DIN EN ISO 14125 ICS 83.120 { EN ISO 14125 Supersedes DIN EN 63, November 1977 edition Descriptors: Plastics, fibre-reinforced plastic composites, flexural properties, testing Faserverstärkte Kunststoffe – Bestimmung der Biegeeigenschaften (ISO 14125 : 1998) European Standard EN ISO 14125 : 1998 has the status of a DIN Standard A comma is used as the decimal marker National foreword This standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, without alteration, International Standard ISO 14125 as a European Standard The responsible German body involved in its preparation was the Normenausschuß Kunststoffe (Plastics Technology Standards Committee), Technical Committee Prepregs The DIN Standards corresponding to the International Standards referred to in clause of the EN are as follows: ISO Standard ISO 178 ISO 291 ISO 293 ISO 294-1 ISO 295 ISO 2818 ISO 3167 DIN Standard DIN EN ISO 178 DIN EN ISO 291 DIN 16770-1 DIN EN ISO 294-1 DIN 53451 DIN EN ISO 2818 DIN EN ISO 3167 Amendments DIN EN 63, November 1977 edition, has been superseded by the specifications of EN ISO 14125, which is identical to ISO 14125 Previous edition DIN EN 63: 1977-11 National Annex NA Standards referred to (and not included in Normative references) DIN 16770-1 Preparation of specimens of thermoplastic moulding materials by compression moulding DIN 53451 Preparation of specimens from thermosetting moulding materials DIN EN ISO 178 Determination of the flexural properties of plastics (ISO 178 : 1993) DIN EN ISO 291 Plastics – Standard atmospheres for conditioning and testing (ISO 291 : 1997) DIN EN ISO 294-1 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1: General principles, and moulding of multipurpose and bar test specimens DIN EN ISO 2818 Plastics – Preparation of test specimens by machining (ISO 2818 : 1994) DIN EN ISO 3167 Plastics – Multi-purpose test specimens (ISO 3167 : 1993) EN comprises 20 pages © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.V., Berlin Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen) Ref No DIN EN ISO 14125 : 1998-06 English price group 10 Sales No 1110 10.98 EN ISO 14125 March 1998 ICS 83.120 Descriptors: Plastics, fibre-reinforced plastic composites, flexural properties, testing English version Fibre-reinforced plastic composites Determination of flexural properties (ISO 14125 : 1998) Composites plastiques renforcés de fibres – Détermination des propriétés de flexion (ISO 14125 : 1998) Faserverstärkte Kunststoffe – Bestimmung der Biegeeigenschaften (ISO 14125 : 1998) This European Standard was approved by CEN on 1998-02-15 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member The European Standards exist in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels © 1998 CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members Ref No EN ISO 14125 : 1998 E Page EN ISO 14125 : 1998 Foreword International Standard ISO 14125 : 1998 Fibre-reinforced plastic composites – Determination of flexural properties, which was prepared by ISO/TC 61 ‘Plastics’ of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 249 ‘Plastics’, the Secretariat of which is held by IBN, as a European Standard This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by September 1998 at the latest In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom Endorsement notice The text of the International Standard ISO 14125 : 1998 was approved by CEN as a European Standard without any modification 4 10 10 10 11 14 15 16 17 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page EN ISO 14125 : 1998 Page 10 EN ISO 14125 : 1998 Page 11 EN ISO 14125 : 1998 Page 12 EN ISO 14125 : 1998 Page 13 EN ISO 14125 : 1998 Page 14 EN ISO 14125 : 1998 Page 15 EN ISO 14125 : 1998 Page 16 EN ISO 14125 : 1998 Page 17 EN ISO 14125 : 1998 Page 18 EN ISO 14125 : 1998 Page 19 EN ISO 14125 : 1998 Page 20 EN ISO 14125 : 1998 [...]...Page 9 EN ISO 14125 : 1998 Page 10 EN ISO 14125 : 1998 Page 11 EN ISO 14125 : 1998 Page 12 EN ISO 14125 : 1998 Page 13 EN ISO 14125 : 1998 Page 14 EN ISO 14125 : 1998 Page 15 EN ISO 14125 : 1998 Page 16 EN ISO 14125 : 1998 Page 17 EN ISO 14125 : 1998 Page 18 EN ISO 14125 : 1998 Page 19 EN ISO 14125 : 1998 Page 20 EN ISO 14125 : 1998