Fiber connectivity solutions

Introduction 230 Preconfigured Panels 234 Empty Chassis 241 Connector Plug-Ins 244 Mounting Options 246 FPL Series Fiber Panels 248 Rack Unit FPL 250 Preconfigured Panels 251 High Density Panels 257 Fiber Management Tray 259 RMG Series Fiber Enclosures 271 Empty Chassiss 275 Modular Adapter Packs 276 Modular MTP/MPO Cassettes 278 102094AE Preconfigured Panels 274 WMG Series Wall Mount Enclosures 279 • Wall Mount Fiber Enclosures 280 Modular Adapter Packs 282 Fiber Optic Specifications 284 Fiber Optic Patch Cords 285 Accessories 288 Fiber Optic Connectors 289 www.adc.com • +1-952-938-8080 • 1-800-366-3891 229 Fiber Connectivity Solutions FL2000 System 232 3/06 TrueNet® Structured Cabling Fiber Connectivity Solutions Fiber Connectivity Solutions Introduction Fundamentals of Fiber Cable Management • Bend radius protection: Micro- or macro-bends in fiber cable increase the risk of fiber breakage and added attenuation, which in turn affect the long-term reliability of the network and increase the cost of operations • Adequate cable troughing with clear routing paths: Cable troughing should keep fiber runs separate from heavier copper cables Routing paths through the cable troughs should be clearly defined and easy to follow, making access to individual fibers easier, quicker and safer, reducing the time required for reconfiguration • E  asy accessibility to installed fibers: Access to installed fibers should ensure that any fiber can be installed or removed without inducing improper bends on adjacent fiber Accessibility is most critical during network reconfiguration operations and directly impacts the cost of operations and reliability of the network • Vertical cable protection: Proper vertical cable management in panels or equipment bays provides adequate support, cable protection and a transition from the vertical run to the back of the equipment that does not damage the fiber • 102094AE TrueNet® Structured Cabling Proper cable management practices make fiber networks less susceptible to accidental damage, quicker to install, less expensive to own and operate over the long haul and easier to expand as needs grow To assure optimal network performance, ADC's fiber solutions fully incorporate key cable management concepts: 3/06 Fiber Connectivity Solutions In the backbone or to the desk, optical networks achieve peak performance with ADC's fiber connectors, patch cords, raceways, and panels featuring integrated cable management and bend radius protection www.adc.com • +1-952-938-8080 • 1-800-366-3891 230 Fiber Connectivity Solutions Introduction FPL Rack Mount FMT Rack Mount RMG Rack Mount WMG Wall Box Functions within Termination/ a single panel Splice Termination/ Splice Termination/ Splice Termination/ Splice Termination/Splice Sizes available (standard simplex connectors) 12, 24, 36, 48, 72, 96 12, 24, 48, 96, 144 12, 16, 24, 32, 72 18, 36, 72 12, 24, 36 Wall Mount Yes No Yes No Yes Rack Mount 19"/23"/ETSI 19"/23" 19"/23"/ETS 19"/23" No Cabinet Mount Yes Yes Yes Yes No Interface Type 6pak Angled Retainer (left/right) Sliding Adapter Pack/Fixed Bulkhead LSX Compatible Adapter Pack LSX Compatible Adapter Pack Degree of Cable Moderate Management Moderate High Fair Fair Allows additional growth Ideal Fair Fair Fair Fair LC Compatible Yes Yes Yes Yes Yes Quad LC Compatible No No No Yes Yes VAM Compatible Yes Yes Yes (2RU only) No No Best Applications for TrueNet Fiber Panel Portfolio Name of Product Best Application Features at a Glance FL2000 Series Termination Splice Applications Locking or latching door, within panel splice wheel, all front access, modular left angle 6paks FPL Series Cabinets near servers, switches, routers Vertical cable guides, angled left/right adapters, highest density with maximum cable management features FMT Series Near active equipment where termination storage is required in or rack unit footprint Completely enclosed drawer with easy access to fiber and high cable management and bend radius protection RMG Telecommunications rooms or to terminate incoming fiber trunks Limited cable management, high density with features price comparable to competitors' products 3/06 • 102094AE TrueNet® Structured Cabling FL2000 Rack Mount www.adc.com • +1-952-938-8080 • 1-800-366-3891 231 Fiber Connectivity Solutions TrueNet® Fiber Panels & Wall Boxes Fiber Connectivity Solutions TrueNet® Structured Cabling FL2000 termination/splice chassis (door open) The economical and flexible FL2000 series of fiber optic products is ideal for small fiber counts and can be used in moderate fiber count applications as well by combining various panels Features • Designed for 19-inch (48.26cm) EIA rack or cabinet environment; optional brackets are available to accommodate 23-inch (58.42cm) rack or cabinet mounting, or virtually any mounting application • Modular design offers maximum flexibility to satisfy both current needs and future growth requirements • A full line of options and accessories ensures compatibility with existing optical equipment • All FL2000 panels accommodate the modular FL2000 6pak plug-ins 6paks are available in all connector styles and can be ordered as needed • ADC’s patented removable angled retainers allow easy access for single fiber maintenance • FL2000 panels and feature superior vertical cable protection and management • Rack mount panels are hinged on one side, allowing full access to the rear of the front plate and the interior of the panel • Rack mount panels can be wall mounted • The new FL2000 splice wheel allows easy roll-up of pigtail and buffer tube lengths and superior bend radius protection Applications • Fully adaptable for large or small main distribution frame (MDF), intermediate distribution frame (IDF) or telephone closet (TC) applications • Provides termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber optic terminal (FOT) equipment patch cords • 102094AE FL2000 termination only chassis (door open) 3/06 Fiber Connectivity Solutions FL2000 System www.adc.com • +1-952-938-8080 • 1-800-366-3891 232 Fiber Connectivity Solutions FL2000 System FL2000 Fast Facts 3RU 5RU 8RU 10RU 48 96 144 n/a n/a Maximum Density for 24 Termination Only— non LC style connector 48 72 n/a n/a Maximum Density for Termination & Splice— LC style connector 24 48 96 144 192 Maximum Density 12 for Termination & Splice— non LC style connector 24 48 72 96 Compatible with ADC Glide? Using glide is more difficult, as panels contain own vertical cable guide or VCG Best Application Termination Splice Features at a glance Locking or latching door, within panel splice wheel, all front access modular left angle 6paks • 3/06 www.adc.com • +1-952-938-8080 • 1-800-366-3891 233 Fiber Connectivity Solutions 2RU Maximum Density for Termination Only— LC style connector 102094AE TrueNet® Structured Cabling Size in Rack Units Fiber Connectivity Solutions FL2000 System Preconfigured Termination/Splice Panels, Black 10.14" (25.76cm) TrueNet® Structured Cabling 19.60" (49.79cm) 4.95" (12.58cm) 5.25" (13.34cm) • Reduce installation time • Simplify ordering process Use this configuration guide to determine the catalog number right for your application Catalog Number FL2 - Panel Type C Termination/Splice Nominal Capacity 12 position A 24 position B 48 position D 72 position E 96 position F Connector Style Multimode SC D Duplex SC ST® LC1 Singlemode Ultra PCSC E Duplex SC Ultra PCST LC1 Number of Ports Loaded Panel Height 3.5" (8.89cm) (2RU) 5.25" (13.34cm) (3RU) 8.75" (22.23cm) (5RU) 14.00" (35.56cm) (8RU) 17.50" (44.45cm) (10RU) • 102094AE FL2000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory 10 Pigtail or Adapter Type A Adapters only Multimode C Softwall bundle 50/125 Softwall bundle P 62.5/125 G Softwall bundle 50/125 laser optimized to 550m5 Softwall bundle J 50/125 laser optimized to 300m5 Singlemode 6-fiber softwall P bundle H 6-fiber Maxistrip R 12-fiber Ribbon4 K 12-fiber softwall bundle1 Y 12-fiber Maxi-Strip4 M W 11 Number of Splice Decks Splice Type 3/06 Fiber Connectivity Solutions Features None or N/A Mechanical (Wheel) Heat Shrink Fusion (Wheel) Heat Shrink Fusion (Deck) 12 Latch Type Latch Hole Plug Screwdriver K1 Lock K2 Lock Number of Cable Clamps clamp (standard) clamps Mounting Style A B C 19" (48.26cm) standard (19.6" [49.78cm] overall) 19" (48.26cm) maximum (19" [48.26cm] overall) 19" (48.26cm) flush mount LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter For use with LC Mounting kit shipped unattached if other than standard mounting style Singlemode choices for use with LC adapters, with multimode options ADC will automatically choose best suited fiber count ADC will automatically configure FL2000 panels with laser optimized cable to use aqua colored SC or LC adapters to indicate 10 Gigabit applications To order adapter only panels with aqua colored adapters, purchase the empty chassis and add 6paks separately Splice Type M N www.adc.com • Mechanical (Wheel) Nortel (Wheel) +1-952-938-8080 • 1-800-366-3891 234 Fiber Connectivity Solutions FL2000 System Preconfigured Termination Only Panels, Black FL2000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory 4.95" (12.58cm) 5.25" (13.34cm) • Reduce installation time • Simplify ordering process Use this configuration guide to determine the catalog number right for your application Catalog Number FL2 - Panel Type R Termination only Nominal Capacity A 12 position B 24 position C 36 position 48 position D 72 position E 96 position F Panel Height 1.75" (4.45cm) (1RU) 3.5" (8.89cm) (2RU) 5.25" (13.34cm) (3RU) 5.25" (13.34cm) (3RU) 8.75" (22.23cm) (5RU) 10.5" (26.67cm) (6RU) Connector Style Multimode SC Duplex SC D ST® LC1 Singlemode Ultra PCSC E Duplex SC Ultra PCST LC1 11 12 A Adapters only Multimode C Softwall bundle 50/125 P Softwall bundle 62.5/125 G Softwall bundle 50/125 laser optimized to 550m5 J Softwall bundle 50/125 laser optimized to 300m5 Singlemode P 6-fiber softwall bundle H 6-fiber Maxistrip R 12-fiber Ribbon4 K 12-fiber softwall bundle4 Y 12-fiber Maxi-Strip4 Mounting Style3 LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter For use with LC Mounting kit shipped unattached, if other than standard mounting style Singlemode choices for use with LC adapters, with multimode options ADC will automatically choose best suited fiber count ADC will automatically configure FL2000 panels with laser optimized cable to use aqua colored SC or LC adapters to indicate 10 Gigabit applications To order adapter only panels with aqua colored adapters, purchase the empty chassis and add 6paks separately • 10 Pigtail or Adapter Type B www.adc.com - Number of Ports Loaded A Fiber Connectivity Solutions TrueNet® Structured Cabling 102094AE • 3/06 19.60" (49.79cm) 10.14" (25.76cm) Features C 19" (48.26cm) standard (19.6" [49.78cm] overall) 19" (48.26cm) maximum (19" [48.26cm] overall) 19" (48.26cm) flush mount Latch Type Latch Hole Plug Screwdriver K1 Lock K2 Lock Number of Cable Clamps clamp (standard) clamps +1-952-938-8080 • 1-800-366-3891 235 Fiber Connectivity Solutions FL2000 System Preconfigured Termination/Splice Panels with Two Adapter Styles, Black 10.14" (25.76cm) TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions Features FL2000 panels can now be loaded with a combination of singlemode and multimode and/or pigtails pre-installed at the factory 19.60" (49.79cm) 4.95" (12.58cm) 5.25" (13.34cm) • Panel available either horizontally or vertically loaded with like adapters with fully loaded configurations • Reduces installation time • Simplify ordering process Splice tray loading always follows loading style (vertical or horizontal) i.e the first two packs' pigtails will be routed to the top splice tray, the second two packs' pigtails will be routed to the 2nd down splice tray Use this configuration to determine the catalog number right for you Catalog Number FL2- / - Panel Type C E Nominal Capacity A B D E F No of Cable Clamps Clamp (Standard) 2 Clamps Latch Type Standard Hole Plug Screwdriver K1 Lock K2 Lock Mounting Style A 19" Standard (19.6" Overall) B 19" Maximum (19.0" Overall) C 19" Flush Mount Vertically Loaded (left/right) Horizontally Loaded (top/bottom) 12-position 24-position 48-position 72-position 96-position Panel Height 3.5" (2RU) 5.25" (3RU) 8.75" (5RU 14" (8RU) 17.50" (10RU) 1st, 2nd Connector Style Multimode Connectors SC D SC Duplex ST® LC Singlemode Connectors SC E SC Duplex ST® LC 1st, 2nd Pigtail or Adapter Type A Adapters Only P 6-Fiber Softwall bundle (Singlemode or Multimode 62.5/125) K 12-Fiber Softwall bundle (Singlemode or Multimode 62.5/125) C Softwall bundle multimode 50/125 J Softwall bundle multimode 50/125 laser optimized to 300m G Softwall bundle multimode 50/125 laser optimized to 550m www.adc.com • No of Spice Decks 0-8 Enter number of Splice Decks Needed Splice Type None or N/A 12 splices max per deck/wheel W HS Fusion (Wheel) Heat Shrink Fusion (Deck) Mechanical (Deck) 24 splices max per wheel (Use with LC adapters) M Mechanical (Wheel) N Nortel (Wheel) Horizontally loaded panel 1st conn style 1st adptr style 1st conn style 1st adptr style 2nd conn style 2nd adptr style 2nd conn style 2nd adptr style +1-952-938-8080 • Vertically loaded panel 1st conn style 2nd adptr 1st conn style 2nd adptr 1st conn style 2nd adptr 1st conn style 2nd adptr 1-800-366-3891 236 style style style style Fiber Connectivity Solutions FL2000 System Used as an interconnect point for MTRJ connectorized pigtails to allow for easy moves, adds, and changes Fiber Connectivity Solutions MTRJ Workstation and Secure Keyed Jacks for Secure Network Applications ADC offers both MTRJ workstation and secure keyed jacks for 62.5/125 micron multimode applications Workstation jacks are putty; secure keyed jacks are available in red, yellow, blue and green The wall boxes and fiber panels come preconfigured with the jack and retainer installed Ship along kits include the following for each installed jack: 900 micron fiber guide, bend limiting boot; actuator key Ordering information follows on the next pages 3/06 • 102094AE TrueNet® Structured Cabling MTRJ Pass Through Adapter www.adc.com • +1-952-938-8080 • 1-800-366-3891 237 Fiber Connectivity Solutions FL2000 System Preconfigured Termination Only Panels with MTRJ adapters, Black FL2- A - Panel Type R Termination only rack mount Nominal Capacity/Panel Height A 12-position black/1.75" (1RU) B 24-position black/3.5" (2RU) C 36-position black/5.25" (3RU) D 48-position black/5.25" (3RU) E 72-position black/8.75" (5RU) F 96-position black/10.5" (6RU) Adapter Style M MTRJ (pass through adapters only) S MTRJ workstation jack (putty) B MTRJ secure keyed jack (blue) G MTRJ secure keyed jack (green) H MTRJ secure keyed jack (yellow) W MTRJ secure keyed jack (red) 10 11 12 Fiber Connections* 012 12 024 24 036 36 048 48 072 72 096 96 144 144 192 192 * Each position = fiber connections (e.g., 24position panel fully loaded with MTRJ = 48 fiber connections) Pigtail or Adapter Type A Adapters only Number of Cable Clamps 0 clamps (standard) Latch Type Standard Hole plug Screwdriver K3 lock K4 lock K1 lock K2 lock Mounting Style A 19" standard (19.6" overall) B 19" maximum (19.0" overall) C 19" flush mount • 102094AE TrueNet® Structured Cabling Catalog Number 3/06 Fiber Connectivity Solutions Ordering Information www.adc.com • +1-952-938-8080 • 1-800-366-3891 238 Fiber Connectivity Solutions RMG Series Fiber Enclosures Modular Adapter Packs Catalog Number Pigtail Length Number of Adapters 06 12 24 blank Adapters only 03 meter Pigtails Simplex adapters Duplex adapters Quad adapters Pigtail Type Connector Style 00 blank B D E None Multimode ConnectorsC2 SC SC C4 M1 Q1 Q2 Q3 Q4 T1 (aqua) with zirconia sleeveC3 duplex SC duplex (aqua) with zirconia sleeve MTRJ LC LC (aqua) Quad LC Quad LC (aqua) ST® Adapters only Singlemode stranded Singlemode maxi-strip Multimode stranded Fiber Size blank B C D S Adapters only 62.5/125 multimode 50/125 multimode 50/125 multimode laser optimized to 300m Singlemode Singlemode Connectors C5 C6 Q7 Q8 T2 SC SC duplex LC duplex Quad LC ST® 102094AE Configurations Readily Available Adapter packs, loaded with multimode LC adapters only RMG-12ADPQ1 Adapter packs loaded with multimode ST adapters only RMG-06ADPT1 Adapter packs loaded with single-mode SC zirconia adapters RMG-06ADPC7 • Adapter packs loaded with multimode SC adapters only RMG-06ADPC1 3/06 Ordering Information Adapter packs loaded with duplex multimode SC adapters only RMG-12ADPC3 Description www.adc.com Catalog Number • +1-952-938-8080 • 1-800-366-3891 277 Fiber Connectivity Solutions TrueNet® Structured Cabling RMG - ADP Fiber Connectivity Solutions RMG Series Fiber Enclosures TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions Modular MTP/MPO Cassettes ADC’s RMG modular MTP cassette assemblies can be used in any of the RMG series fiber enclosures in a variety of connector styles Designed for easy installation and allowing rapid deployment with less labor Features • Completely interchangeable between RMG panel products • Can be ordered with all standard types duplex and quad multimode and singlemode adapters • Modular design reduces installation costs Catalog Number RMG - MTP Number of Adapters 12 24 Connector Style duplex adapters quad adapters 00 None Multimode Connectors C3 C4 SC duplex SC duplex (aqua) with zirconia sleeve M1 MTRJ Q1 LC Q2 LC (aqua) Q3 Quad LC Q4 Quad LC (aqua) Fiber Size B C D 62.5/125 multimode 50/125 multimode 50/125 multimode laser optimized to 300m S Singlemode Singlemode Connectors C6 Q7 Q8 Ordering Information SC duplex LC Quad LC LC adapters terminate two fibers at each adapter and should be considered duplex adapters in this ordering scheme Configurations Readily Available Catalog Number Description MTP Cassette 50/125 multimode fiber RMG-12MTPCQ1 multimode LC adapters MTP Cassette 50/125 multimode fiber RMG-24MTPCQ3 Quad multimode LC adapters www.adc.com • +1-952-938-8080 • 1-800-366-3891 278 Fiber Connectivity Solutions 3/06 • The WMG Series Wall Mount Fiber Enclosures are ideal for LAN applications requiring a fully enclosed and lockable wall mount enclosure The cabinets are one or two-door direct termination and splice solutions These enclosures are designed to support up to eight modular adapter packs This rugged wall-mount cabinet is equipped with cable management modules and cable routing accessories to limit bend radius and add strain relief control In addition, the lockable dual door design allows public and private portions of the network to be securely separated from each other For splicing applications the cable management modules are removed and replaced with splice trays This enclosure is available pre-loaded with any industry standard adapter Optional single or double lock features are available upon request Features Fiber Connectivity Solutions 102094AE TrueNet® Structured Cabling WMG Series Wall Mount Fiber Enclosures • Superior cable management through the use of bend radius control at all cable exits and strain relief protection • Optional integrated splice module on the and module panel version • Available pre-loaded with any industry-standard adapter • Added security protection • 6-position or 8-position modular adapter panel capability • Compact design • Fully enclosed and lockable • Wrap-around client-side door design (WMG-8000-00B) provides maximum adapter accessibility for client-side patching • Multi-sized cable entry knockouts (WMG-8000-00B) supports either ½-inch or ¾-inch cable glands for maximum cable strain relief and protection WMG Fast Facts Dimensions Maximum density for Termination Only— LC style connector Maximum density for Termination Only— LC style connector Maximum density for Termination/Splice— non LC style connector Maximum density for Termination /Splice— LC style connector www.adc.com • Model Based Adapter Pack Model Term Only 9" x 12" x 3.5" on Adapter Pack Capacity Adapter Pack Adapter Pack Model Model 12" x 15" x 3.5" 14" x 17.25" x 7" 24 24 48 12 48 96 n/a 24 48 n/a 24 72 +1-952-938-8080 • 1-800-366-3891 279 Fiber Connectivity Solutions WMG Series Wall Mount Fiber Enclosures WMG Pre-Configured Wall Boxes With Adapters and/or Pigtails ADC’s WMG series fiber wall boxes are available to be shipped with factory installed adapter modules and/or pre-terminated pigtail assemblies which simplifies the ordering process and reduces installation time and costs TrueNet® Structured Cabling 102094AE • WMG - - Panel Size Panel Color Description NOM Capacity 9" x 12" x 3.5" 12" x 15" x 3.5" 14" x 17.25" x 3.5" adapter packs adapter packs adapter packs B Splice Deck Type Adapter/Pigtails A P R B D E Black None Adapters only Adapters and singlemode stranded pigtails Adapters and singlemode ribbon pigtails Adapters and stranded pigtails with 50/125 multimode fiber Adapters and stranded pigtails with 50/125 multimode fiber laser optimized to 300m None or N/A Heat Shrink Fusion Mechanical Nortel Qpak Loaded Modules Adapters and stranded pigtails with 62.5/125 multimode fiber None loaded adapter packs loaded adapter packs loaded adapter packs Connector Style 00 None Multimode Connectors C1 C2 C3 C4 M1 Q1 Q2 Q3 Q4 T1 SC SC (aqua) with zirconia sleeve SC duplex SC duplex (aqua) with zirconia sleeve MTRJ LC LC (aqua) with zirconia sleeve Quad LC Quad LC (aqua) with zirconia sleeve ST® C5 C6 Q7 Q8 T2 SC SC duplex LC Quad LC ST® Singlemode Connectors Ordering Information Configurations Readily Available Description adapter pack wall box, loaded with multimode LC adapter packs (completely filled) adapter pack wall box, loaded with multimode aqua SC adapter packs (completely filled) adapter pack wall box, loaded with multimode LC adapter packs Catalog Number WMG-2AQ1-20B WMG-4AC2-40B WMG-8AQ1-80B 3/06 Fiber Connectivity Solutions Catalog Number www.adc.com • +1-952-938-8080 • 1-800-366-3891 280 Fiber Connectivity Solutions WMG Series Wall Mount Fiber Enclosures WMG Empty Wall Box Features • Available in three sizes to suit a variety of applications and fiber counts • Standard LSX/LGX adapter pack footprints are accommodated in empty wallbox Description Empty Wall box—Maximum capacity adapter packs Empty Wall box—Maximum capacity adapter packs Empty Wall box—Maximum capacity adapter packs Dimensions Catalog Number 9" x 12" x 3.5" 12" x 15" x 3.5" 14" x 17.25" x 7" WMG-2000-00B WMG-4000-00B WMG-8000-00B • 3/06 www.adc.com • +1-952-938-8080 • 1-800-366-3891 281 Fiber Connectivity Solutions Ordering Information 102094AE TrueNet® Structured Cabling The WMG empty wall box allows for the user to mix and match any combination of modular adapter packs or simply utilize a “grow as you go” approach to their network Fiber Connectivity Solutions WMG Series Wall Mount Fiber Enclosures Features • Completely interchangeable between RMG & WMG fiber enclosures • Can be ordered with all standard types of simplex & duplex multimode and singlemode adapters • Available with preterminated 3m (9.84') pigtails to reduce installation time & cost • One end of pigtail terminated to chosen connector style and installed into adapter pack plug-in adapters Ordering information follows on the next page • 102094AE TrueNet® Structured Cabling ADC’s RMG modular adapter pack assemblies can be used in any of the RMG or WMG series fiber enclosures in a variety of connector styles and with or without preterminated 3m (9.84') pigtails Its modular design is user-friendly and easy to install The RMG Series modular adapter packs are not interchangeable with FL2000 or FL1000 Series fiber enclosures 3/06 Fiber Connectivity Solutions Modular Adapter Packs www.adc.com • +1-952-938-8080 • 1-800-366-3891 282 Fiber Connectivity Solutions WMG Series Wall Mount Fiber Enclosures Modular Adapter Packs Catalog Number Number of Adapters Simplex Adapters Duplex Adapters Quad Adapters blank Adapters only 06 3M Pigtails Pigtail Type Connector Style blank Adapters only B Singlemode stranded D Singlemode maxi-strip 00 None Multimode Connectors C1 C2 C3 C4 M1 Q1 Q2 Q3 Q4 T1 SC SC (aqua) with zirconia sleeve SC duplex SC duplex (aqua) with zirconia sleeve MTRJ LC LC (aqua) with zirconia sleeve Quad LC Quad LC (aqua) with zirconia sleeve ST® Fiber Size blank Adapters only B 62.5/125 multimode C 50/125 multimode 50/125 multimode laser D optimized to 300m S Singlemode Singlemode Connectors C5 C6 T2 Q7 Q8 Fiber Connectivity Solutions 06 12 24 Pigtail Length SC SC Duplex ST® LC Quad LC Ordering Information Configurations Readily Available Description Adapter pack, loaded with multimode LC adapters only Catalog Number RMG-12ADPQ1 Adapter pack loaded with multimode ST adapters only RMG-06ADPT1 Adapter pack loaded with single-mode SC zirconia adapters RMG-06ADPC7 Adapter pack loaded with multimode SC adapters only RMG-06ADPC1 Adapter pack loaded with duplex multimode SC adapters only RMG-12ADPC3 3/06 • 102094AE TrueNet® Structured Cabling RMG - ADP - www.adc.com • +1-952-938-8080 • 1-800-366-3891 283 Fiber Connectivity Solutions Fiber Optic Specifications TrueNet® Structured Cabling Singlemode Ultra Polish Connectors (UPC) Insertion Loss (1310 and 1550nm) Return Loss (1310 and 1550nm) Fiber Recess Apex Offset Radius of Curvature Singlemode Angled Polish Connectors (APC) Insertion Loss (1310 and 1550nm) Return Loss (1310 and 1550nm) Polished Endface Radius Fiber Recess Apex Offset Endface Angle FC LC SC ST® 0.5dB max 0.5dB max 0.5dB max 0.5dB max 20dB 20dB 20dB 20dB LX.5® 0.4dB max 0.15dB typical 25dB SC 0.2dB max 0.09dB typical 57dB ST® 0.2dB max 0.15dB typical 57dB FC 0.2dB max 0.09dB typical 57dB LC 0.3dB max 0.1dB typical 55dB LX.5® 0.2dB max 0.08dB typical 57dB ± 50nm 50 micron max 10–25mm ± 50nm 50 micron max 10–25mm ± 50nm 50 micron max 10–25mm -100 to +50nm 50 micron max 10–25mm ± 50nm 50 micron max 10–25mm SC 0.5dB max 0.15dB typical 65dB ST® 0.5dB max 0.2dB typical 65dB FC 0.5dB max 0.15dB typical 65dB LX.5® 0.2dB max 0.08dB typical 65dB 5–15mm -100 to +50nm 50 micron 8˚ ± 0.5 5–15mm -100 to +50nm 50 micron 8˚ ± 0.5 5–15mm -100 to +50nm 50 micron 8˚ ± 0.5 5–12mm ± 50nm 65 micron 8˚ ± 0.5 Patch Cords L Length to 15m +15m Tolerance +16cm/-0cm +1%/-0cm Length to 15m +15m Tolerance +16cm/-0cm +1%/-0cm 102094AE Multifiber • L 3/06 Fiber Connectivity Solutions Multimode Ultra Polish Connectors Insertion Loss (850/1310nm) Return Loss (850/1310nm) www.adc.com • +1-952-938-8080 • 1-800-366-3891 284 Fiber Connectivity Solutions Fiber Optic Patch Cords 62.5/125 Multimode Catalog Number 3/06 • Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Length Cable Type Leave 3mm single Blank M 2mm single F 1.7mm single 900 micron Z 3mm dual zip 2mm dual zip T 1.7mm dual zip Connector Type MSC SC ultra polish MDSC SC duplex MST ST® ultra polish MLC LC ultra polish MDLC LC duplex X Length in meters For hybrid patch cords, enter both connector types in this field and separate them with a slash mark (/) One connector per end; requires dual zip cable Ordering Example FPC-MST/MSC-B-7M: Patch cord with ST® ultra polish connector on one end and SC ultra polish connector on the other end, 62.5/125 fiber size, meters in length 50/125 Multimode Catalog Number - - A - M Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Length Cable Type Leave 3mm single Blank OM 2mm single F 1.7mm single 900 micron Z 3mm dual zip 2mm dual zip T 1.7mm dual zip Connector Type MSC SC ultra polish MDSC SC duplex MST ST® ultra polish MLC LC ultra polish MDLC LC duplex X Length in meters For hybrid patch cords, enter both connector types in this field and separate them with a slash mark (/) One connector per end; requires dual zip cable Ordering Example FPC2-MSC/MLC-A-7M: Patch cord with SC ultra polish connector at one end and LC ultra polish on the other end, 2mm dual zip 50/125 fiber, meters in length www.adc.com • +1-952-938-8080 • 1-800-366-3891 285 Fiber Connectivity Solutions 102094AE TrueNet® Structured Cabling - - B - M Fiber Connectivity Solutions Fiber Optic Patch Cords 50/125 Ultra Multimode (Laser Optimized to 300m) Catalog Number TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions - - A - M Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Length Cable Type A 3mm single MA 2mm single FA 1.7mm single 2A 2mm dual zip TA 1.7mm dual zip Connector Type MSC SC ultra polish MDSC SC duplex MST ST® ultra polish MLC LC ultra polish MDLC LC duplex X Length in meters For hybrid patch cords, enter both connector types in this field and separate them with a slash mark (/) One connector per end; requires dual zip cable Ordering Example FPCTA-MSC/MLC-A-7M: Patch cord with SC ultra polish connector at one end and LC ultra polish on the other end, 2mm dual zip 50/125 ultra fiber, meters in length Singlemode Catalog Number - - - M Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Length X Length in meters Cable Type Blank 2mm S 900micron, 1.7mm, 3mm Cable Type Leave 3mm single Blank M 2mm single F 1.7mm single 900 micron Z 3mm dual zip 2mm dual zip T 1.7mm dual zip Connector Type SPSC SC ultra polish APSC SC angled polish SDSC SC duplex SPFC FC ultra polish APFC FC angled polish For hybrid patch cords, enter both connector types SPST ST® ultra polish in this field and separate them with a slash mark; SPLX LX.5® ultra polish remove “S” from the ultra polish connector options SDLC LC ultra polish duplex 2 (see second ordering example) One connector per end; requires dual zip cable Ordering Example FPC2-SPFC-10M: Patch cord with ultra polish FC connectors on both ends, 2mm dual zip cable, 10 meters in length with standard breakout length of 12" on both ends FPC-SPST/PSC-S-10M: Patch cord with ST® ultra polish connector on one end and SC ultra polish connector on the other end, 10 meters in length www.adc.com • +1-952-938-8080 • 1-800-366-3891 286 Fiber Connectivity Solutions Fiber Optic Patch Cords Multifiber Patch Cords (4 to 32 fibers) Cable Jacket, PVC 0.89mm thick Central Strength Aramid Yarn Member PVC Jacket 0.64 mm thick Cable Jacket, PVC 1.65mm thick Aramid Yarn Central Strength Member 1.7mm Fiber subunit Buffered Fiber 900 micron 3/06 • Rip Cord Rip Cord Rip Cord Rip Cord (12 fiber shown) Standard wall (4-fiber shown) Soft wall (12-fiber shown) Thick wall (4-fiber shown) Standard wall: Available with 4, 6, 12 or 32 tight buffered 1.7mm fibers enclosed in a standard wall outer jacket Each 1.7mm fiber is coded for easy identification of individual fibers Central strength member, aramid yarn; PVC jacket thickness 0.89mm Soft wall: Available with 6, or 12 tight buffered 900 micron fibers with a thin outer jacket No central strength member or aramid yarn; PVC jacket thickness 0.64mm Thick wall: Available with or 24 tight buffered 1.7mm fibers Each 1.7mm fiber is coded for easy identification of individual fibers Central strength member, aramid yarn; PVC jacket thickness 1.65mm Multimode Catalog Number MFPM- / - M- / Connector Type (1st and 2nd end) A P Stub SC ultra polish ST® ultra polish FC ultra polish LC ultra polish Length Breakout Length X Length in meters X Length in inches Leave blank if both ends 12" Cable Type WB 4-fiber soft wall, 62.5/125 PB 6-fiber soft wall, 62.5/125 NB 12-fiber soft wall, 62.5/125 Singlemode Catalog Number FPM-0 / - M- / Connector Type (1st and 2nd end) Stub SC ultra polish ST® ultra polish FC ultra polish E SC angled polish D FC angled polish K LC ultra polish www.adc.com • Cable A D W E P L F M AD BD Length Breakout Length X Length in meters X Length in inches Leave blank if both ends 12" Type 4-fiber thick wall with 1.7mm subunits 4-fiber standard wall with 1.7mm subunits 4-fiber soft wall 6-fiber standard wall with 1.7mm subunits 6-fiber soft wall 8-fiber soft wall 12-fiber standard wall with 1.7mm subunits 12-fiber soft wall 24-fiber thick wall with 1.7mm subunits 32-fiber thick wall with 1.7mm subunits +1-952-938-8080 • 1-800-366-3891 287 Fiber Connectivity Solutions 102094AE TrueNet® Structured Cabling 1.7mm Fiber subunit Fiber Connectivity Solutions Accessories Ordering Information Description Catalog Number Fiber connector/adapter cleaning kit Includes: • Instruction sheet • Lint-free wipes • Isopropyl alcohol • Cotton swabs • Lint-free pipe cleaners • Oil-free compressed air FPC-CLNKIT This kit contains flammable alcohol and compressed air For this reason, it can be shipped by surface method only • 102094AE TrueNet® Structured Cabling The fiber connector/adapter cleaning kit contains all the items required to adequately clean fiber connectors and adapters The performance of an optical fiber system is largely dependent on the fiber connector cleaning procedures followed prior to installation It is suggested that all the connectors and adapters be cleaned before making any connections The kit cleans approximately 500 connectors or adapters 3/06 Fiber Connectivity Solutions Fiber Connector/Adapter Cleaning Kit www.adc.com • +1-952-938-8080 • 1-800-366-3891 288 Fiber Connectivity Solutions Fiber Optic Connectors Epoxy/Polish Connectors • Available in both singlemode and multimode constructions • ST®, SC, MTRJ, FC and LC connector types available • Connectors utilize pre-radiused zirconia ceramic ferrules • Singlemode ultra physical contact (UPC) and angled physical contact (APC) polishes available for SC, FC and LC connectors • SC and LC connectors can be duplexed • ST®, SC, FC and LC tested to rigid Telcordia GR-326 standard • Available for 900µm and 3.0mm installations • Typical insertion loss: 0.2dB Fiber Connectivity Solutions • All styles meet Fiber Optic Connector Intermateability Standard (FOCIS) documents Ordering information follows on next page 3/06 • 102094AE TrueNet® Structured Cabling Features www.adc.com • +1-952-938-8080 • 1-800-366-3891 289 Fiber Connectivity Solutions Fiber Optic Connectors Epoxy/Polish Connectors Ordering Information TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions Description Catalog Number SC epoxy/polish connector Singlemode, 900µm blue boot, ceramic ferrule Singlemode, 3mm blue boot, ceramic ferrule Singlemode, APC 900µm green boot, ceramic ferrule Singlemode, APC 3mm green boot, ceramic ferrule Multimode, 900µm black boot, ceramic ferrule Multimode, 3mm black boot, ceramic ferrule SC duplex clip—multimode, beige SC duplex clip—singlemode, blue EPSCUSM30096BL EPSCUSM30306BL EPSCASM30096GR EPSCASM30306GR EPSCXMM30096BK EPSCXMM30306BK SCD-CLIP6BG SCD-CLIP6BL ST® epoxy/polish connector Singlemode, 900µm yellow boot, ceramic ferrule Singlemode, 3mm yellow boot, ceramic ferrule Multimode, 900µm black boot, ceramic ferrule Multimode, 3mm black boot, ceramic ferrule EPSTUSM30096YL EPSTUSM30306YL EPSTXMM30096GR EPSTXMM30306GR FC epoxy/polish connector Singlemode, 900µm black boot, ceramic ferrule Singlemode, 3mm black boot, ceramic ferrule Singlemode, APC 900µm green boot, ceramic ferrule Singlemode, APC 3mm green boot, ceramic ferrule Multimode, 900µm black boot, ceramic ferrule Multimode, 3mm black boot, ceramic ferrule EPFCUSM30096BK EPFCUSM30306BK EPFCASM30096GR EPFCASM30306GR EPFCXMM30096BK EPFCXMM30306BK LC epoxy/polish connector Singlemode, 900µm boot, ceramic ferrule Singlemode, 1.8mm boot, ceramic ferrule Singlemode, 3mm boot, ceramic ferrule Singlemode, APC 900µm boot, ceramic ferrule Singlemode, APC 1.8mm boot, ceramic ferrule Singlemode, APC 3.0mm boot, ceramic ferrule Multimode, 900µm boot, ceramic ferrule Multimode, 1.8mm boot, ceramic ferrule Multimode, 3mm boot, ceramic ferrule LC duplex clip EPLCUSM30095 EPLCUSM30185 EPLCUSM30305 EPLCASM3009 EPLCASM3018 EPLCASM3030 EPLCXMM30095 EPLCXMM30185 EPLCXMM30305 LCD-CLIP MTRJ epoxy/polish connector Singlemode, 3.0mm round boot Singlemode, 3.0mm oval boot for 1.6mm zip cord Multimode, 3.0mm round boot Multimode 3.0mm oval boot for 1.6mm zip cord EPMT-SM-32 EPMT-SM32Z EPMT-MM-32 EPMT-MM32Z Accessories Epoxy/polish connector tool kit: specify connector style Consumables for epoxy/polish connectors Ideal Tool Kit: specify 100V or 220V curing oven EPTK-XX* EPTK-CON IDTK *Replace XX with connector style: ST® SC FC LC Other boot colors available, please contact ADC www.adc.com • +1-952-938-8080 • 1-800-366-3891 290 Fiber Connectivity Solutions Fiber Optic Connectors Field Installation Connectors 3/06 • • Available in both singlemode and multimode constructions • ST®, SC, MTRJ, FC and LC connectors available • Pre-polished, no epoxy connector— no polishing required • Outstanding optical performance • Factory-assembled • Fiber is fully bonded into the ferrule • Fully compliant with ANSI/TIA/EIA-568-B • Best solution for emergency repairs • Small-form-factor MTRJ and LC double current densities on active equipment and passive hardware, and fit transceiver packages • Well suited for fiber-to-the-workstation applications • Typically install in two minutes, saving labor costs • Simple tool kit with easy-to-use-tools • Typical insertion loss: 0.4dB (singlemode), 0.3dB (multimode) Ordering Information Description Catalog Number SC no epoxy/no polish connector Singlemode, ceramic ferrule Singlemode, UPC, ceramic ferrule 62.5µm multimode, composite ferrule 50µm multimode, ceramic ferrule Duplex clip for FISC connectors 50µm laser enhanced multimode, ceramic ferrule FISC-SMSP-30 FISC-SMUP-30 FISC-M6MM-32 FISC-M5MM-30 SCD-CLIP2 FISC-M5UM-30 ST® no epoxy/no polish connector Singlemode, ceramic ferrule 62.5µm multimode, composite ferrule 50µm multimode, ceramic ferrule 50µm laser enhanced multimode, ceramic ferrule FIST-SMSP-30 FIST-M6MM-32 FIST-M5MM-30 FIST-M5UM-30 MTRJ no epoxy/no polish connector Singlemode, composite ferrule 62.5µm multimode, composite ferrule 50µm multimode, ceramic ferrule 50µm laser enhanced multimode, composite ferrule FIMT-SMUP-30 FIMT-M6MM-32 FIMT-M5MM-30 FIMT-M5UM-32 LC no epoxy/no polish connector Singlemode, ceramic ferrule 62.5µm multimode, composite ferrule 50µm multimode, ceramic ferrule 50µm laser enhanced multimode, ceramic ferrule FILC-SMUP-30 FILC-M6MM-32 FILC-M5MM-30 FILC-M5UM-30 Accessories Field installation tool kit FITK www.adc.com • +1-952-938-8080 • 1-800-366-3891 291 Fiber Connectivity Solutions 102094AE TrueNet® Structured Cabling Features [...]... 3/06 Fiber Connectivity Solutions FPL- R – 0B www.adc.com • +1-952-938-8080 • 1-800-366-3891 252 Fiber Connectivity Solutions FPL Series Fiber Enclosures Preconfigured Termination Panels with Multifiber Cable, Black • Available in 24-, 48-, 72-, 96- and 144-termination densities • Available with factory-installed multifiber intrafacility fiber cable (IFC) or OSP cable • Panels with multifiber... FL2-19MAX1750-B Fiber Connectivity Solutions 9" Maximum TrueNet® Structured Cabling Rear Guard Box (optional with some racks) 18.31" (46.51cm) 21.88" (55.58cm) 3.02" (7.67cm) TSI Bracket Mounting 5.00" (12.70cm) 4.85" (12.32cm) www.adc.com • 5.00" (12.70cm) +1-952-938-8080 • 1-800-366-3891 247 Fiber Connectivity Solutions FPL Series Fiber Panels TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions. .. for 12 fiber capacity panel only Bonding/grounding kit FL2-ACC008 FL2-ACC007 FL2-ACC021 FL2-ACC033 FL2-ACC006 Mounting kits sold separately www.adc.com • +1-952-938-8080 • 1-800-366-3891 241 Fiber Connectivity Solutions 102094AE TrueNet® Structured Cabling Features Fiber Connectivity Solutions FL2000 System Empty Splice Panels, Black 3/06 • 102094AE TrueNet® Structured Cabling Features Fiber Connectivity. .. separately www.adc.com • +1-952-938-8080 • 1-800-366-3891 243 Fiber Connectivity Solutions TrueNet® Structured Cabling • Mounting 102094AE 19.60" (49.79 cm) 10.14" (25.76 cm) Features Fiber Connectivity Solutions FL2000 System 6pak Connector Plug-Ins With Adapters and Pigtails TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity Solutions Features • Available with preterminated 3 meter (9.84')... optimized to 550 meters 3/06 Fiber Connectivity Solutions FPL-144 R – B www.adc.com • +1-952-938-8080 • 1-800-366-3891 258 Fiber Connectivity Solutions Fiber Management Tray Features: All-Front-Access Design By controlling the movement of fibers into the tray, error-proof slack loop management is maintained, ensuring 30mm bend radius protection This is crucial to protecting fiber, eliminating service... management trough 12 fiber capacity 24 fiber capacity 36 fiber capacity 48 fiber capacity 72 fiber capacity 96 fiber capacity Panel Height Catalog Number 1.75" (4.45cm) 3.50" (8.89cm) 5.25" (13.34cm) 5.25" (13.34cm) 8.75" (22.23cm) 10.50" (26.67cm) FL2-12RPNL-B FL2-24RPNL-B FL2-36RPNL-B FL2-48RPNL-B FL2-72RPNL-B FL2-96RPNL-B 24 fiber capacity Accessories Wall mount bracket, black—needed for 12 fiber capacity... following page for 288 fiber count termination/splice LC  Nortel Qpak is for use in heat shrink fusion applications using LC adapters 1  2 • 102094AE Nominal Capacity 24 24-position 48 48-position 72 72-position 96 96-position 3/06 Fiber Connectivity Solutions FPL- R - B www.adc.com • +1-952-938-8080 • 1-800-366-3891 256 Fiber Connectivity Solutions FPL Series Fiber Panels High-Density... double the capacity of the panel by terminating two fibers at each adapter 2  Nortel Qpak is for use in heat shrink fusion applications using LC adapters 1  • 102094AE TrueNet® Structured Cabling Panel Size 3/06 Fiber Connectivity Solutions FPL - R - B www.adc.com • +1-952-938-8080 • 1-800-366-3891 250 Fiber Connectivity Solutions FPL Series Fiber Panels Preconfigured Termination Only Panels,... required in 1 or 2 rack unit footprint Features at a Glance Completely enclosed drawer with easy access to fiber and high cable management and bend radius protection 3/06 Fiber Connectivity Solutions FMT Fast Facts www.adc.com • +1-952-938-8080 • 1-800-366-3891 260 Fiber Connectivity Solutions Fiber Management Tray 1 Rack Unit Slack Storage Bulk Storage Drawer Capacity Slack storage type 3mm cable... 261 Fiber Connectivity Solutions Discrete Storage Drawer 3/06 102094AE TrueNet® Structured Cabling The slack storage tray offer bulk storage for up to 60 fibers, and discrete slack storage for up to 16 fibers This all-front-access tray mounts in 19- or 23-inch racks Sliding radius limiters provide cable management for incoming and outgoing fibers Unit comes with black faceplate and chassis Fiber Connectivity ... Fiber Connectivity Solutions TrueNet® Structured Cabling RMG - ADP Fiber Connectivity Solutions RMG Series Fiber Enclosures TrueNet® Structured Cabling 102094AE • 3/06 Fiber Connectivity. .. to fiber and high cable management and bend radius protection 3/06 Fiber Connectivity Solutions FMT Fast Facts www.adc.com • +1-952-938-8080 • 1-800-366-3891 260 Fiber Connectivity Solutions Fiber. .. 1-800-366-3891 271 Fiber Connectivity Solutions Applications and Benefits 102094AE TrueNet® Structured Cabling RMG Series Fiber Enclosures Fiber Connectivity Solutions RMG Series Fiber Enclosures