OmniReach™ FTTX Solutions for Multi-Dwelling Unit Applications 1st Edition Table of Contents Fiber Distribution Hub - FDH 3000 5-7 Indoor Fiber Distribution Hub - FDH 3000i 8-10 FDH 3000 and FDH 3000i Splitter Module 11-12 FDH 3000 and FDH 3000i Accessories 13-14 Outdoor Fiber Distribution Terminal (oFDT) 15-16 Fiber Splitter Box (FSB) 17-20 Indoor Fiber Distribution Terminal (iFDT) 21-22 Reduced Bend Radius Fiber MDU Drops 23-24 Index 25 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Introduction 1-4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Multi-Dwelling Unit Solutions Fiber-to-the-X (FTTX) network applications increasingly include Multi-Dwelling Units (MDUs) as part of the network build—often accounting for over 40% of the target subscriber base The MDU segment of an FTTX network is the “last mile” or distribution end of the network, representing the demarcation point for electronics and home wiring where the end user is connected in the more densely populated MDU applications (i.e apartments, town homes, campuses) ADC OmniReach™ Solutions for MDU applications provide high performance interconnection of fiber cables and equipment at multiple dwelling units These solutions support both low and high fiber count applications and include compact, environmentally protective enclosures, high performance cable assemblies and connectivity components With preterminated solutions from ADC, distribution nodes can be added to the network quickly and with increased reliability, reducing overall installation and long-term maintenance costs Features • Provide secure indoor and outdoor environmental protection • Feature ADC high-performance components • Meet rigorous quality assurance standards, and are independently tested and certified to assure reliability • Feature superior fiber management techniques for flexible re-arrangement • Accommodate a wide range of fiber counts and mounting/deployment applications • Available in high-density preterminated configurations • Designed to be compact and craft-friendly • Lower installation costs and accelerate construction of fiber network connections 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 Multi-Dwelling Unit Solutions Residential Businesses Central Office Headend High-Rise MDU Medium-Rise MDU 102761AE OmniReach™ Multi-Dwelling Unit Solutions Applications • Indoor Fiber Distribution Terminal (iFDT) 4/08 Indoor Fiber Distribution Hubs (iFDH) www.adc.com • +1-952-938-8080 • 1-800-366-3891 Reduced Bend Radius MDU Drops Horizontal/Garden Style MDU Reduced Bend Radius MDU Drops Outdoor Fiber Distribution Terminal (oFDT) Fiber Distribution Hub (FDH) Low-Rise MDU Reduced Bend Radius MDU Drops Feeder Distribution Drop Outdoor Fiber Distribution Terminal (oFDT) www.adc.com • +1-952-938-8080 • 1-800-366-3891 Multi-Dwelling Unit Solutions OmniReach features solutions for all MDU applications including high-rise, medium-rise, low-rise/garden style and horizontal housing structures, providing the necessary customization to meet the specific requirements for any size multiple dwelling unit building Indoor Fiber Distribution Hub (iFDH) Fiber Distribution Hub (FDH) Outdoor Fiber Distribution Terminal (oFDT) Indoor Fiber Distribution Terminal (iFDT) Fiber Distribution Splitter module Drop Cable 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Applications www.adc.com • +1-952-938-8080 • 1-800-366-3891 Fiber Distribution Hub OmniReach™ Multi-Dwelling Unit Solutions FDH 3000 ADC’s OmniReach™ FTTX Solutions are the industry’s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant The OmniReach FDH 3000 is designed to meet and serve the distinct needs of diverse markets and customer segments The unique design of the FDH 3000 provides for rapid connection between fiber optic cables and passive optical splitters in the outside plant segment of the network, facilitating fast service connection and reconfiguration, simplified network installations and improved installation efficiencies in the field Unique Design to Meet Diverse Customer Requirements “Craft Friendly” to support both low and highdensity applications, different network system designs, and diverse installation environments Flexible and Modular Standardized splitter modules and accessories for all FDH 3000 cabinets Easy to Order Streamlined configurations simplify the ordering process Incorporates ADC Quality and Innovation ADC is a high quality, industry-leading brand you can rely on to future-proof your network, with a complete portfolio of FTTX products and services to ensure seamless deployment and maintenance over the life of the network The FDH 3000 incorporates four time-tested elements that have long impacted reliability, flexibility and operational costs within the central office: • Bend radius protection • Intuitive cable routing 102761AE • Easy fiber/connector access 4/08 • • Physical protection www.adc.com • +1-952-938-8080 • 1-800-366-3891 Fiber Distribution Hub Features and Benefits Integrated slack storage spools Allows for storage of excess fiber while providing positive bend radius control Four cabinet sizes Extra Small (24-96 fibers) Small (72-288 fibers) Medium (72-432 fibers) Large (72-864 fibers) Angled bulkhead panels Eliminates 90° bends and assists technician with routing Intelligent design Allows for standardized splitter modules and accessories across all cabinet sizes Unique “swing-out frame” design Allows for easy maintenance and access to back of modules and cables Dust-cap friendly parking lot 96 terminations up to 48 parking lots; 288 terminations up to 72 parking lots; 432 terminations up to 128 parking lots; 864 terminations up to 256 parking lots Common “Mini Plug & Play” splitter module with common output length Allows for true plug and play functionality Pole mounting option Available with small (72-288) and medium (72-432) termination models Supports diverse splitter module configurations 1x32, 2x32, 1x16, dual 1x16, 1x8, dual 1x8, 1x4, dual 1x4, 1x2, dual 1x2 Three-point latch Provides weather-tight seal Six-inch pad mount skirt Included with all cabinets Craft friendly splitter module design Easy to insert and remove without affecting adjacent splitters Hand hole options Available in polymer-concrete NEMA-4 Design Provides heavy duty protection from wind, rain and other contaminants Features discrete ground and cable location access Allows for locating wires without entry into the cabinet Extreme temperature tubing Improved performance at high and low temperatures Accessible with standard 216B tool Offers flexible security options, including pad lock provisions Product Dimensions Cabinet Size (HxWxD) Distribution Area Size Extra Small (24-96) 30" x 21" x 14" (76.20 x 52.80 x 35.3 cm) 24-96 homes Small (72-288) 30" x 27" x 18" (76.20 x 68.58 x 45.72 cm) Medium (72-432) Large (72-864) Access Mounting Options Splitter Slots Cable Exit Location all front ground, pole bottom 72-288 homes all front ground, pole 12 top or bottom 41" x 27" x 18" (121.92 x 68.58 x 45.72 cm) 72-432 homes all front ground, pole 24 top or bottom 48" x 46" x 22" (121.92 x 116.84 x 55.88 cm) 72-864 homes all front 48 bottom ground 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions FDH 3000 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Fiber Distribution Hub Hand Hole Kits Ordering Information Description Ordering Number Hand Hole and cover kit for extra small (24-96 fibers) cabinets FMS-FD3C-KIT-A Hand Hole and cover kit for small (72-288 fibers) and medium (72-432 fibers) cabinets FMS-ACE100-KIT-A Hand Hole and cover kit for large (72-864 fibers) cabinets FMS-FD3J-KIT-A Note: For application with FDH 3000 only Pad Mount Frames Ordering Information Description Ordering Number Extra small (24-96 fibers) pad mount frame FD3-PMFC06 Small (72-288 fibers) and medium (72-432 fibers) pad mount frame FD3-PMFE06 Large (72-864 fibers) pad mount frame FD3-PMFJ06 Note: For application with FDH 3000 only Additional Panel Options Ordering Information Description Ordering Number Single Armor Loose Tube 72 position APC SC FD3MOD-072JGAB Dielectric Loose Tube 72 position APC SC FD3MOD-072JJAB Single Armor Ribbon 72 position APC SC FD3MOD-072JLAB Dielectric Ribbon 72 position APC SC FD3MOD-072JTAB Note: For application with FDH 3000 only 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions FDH 3000 and FDH 3000i Accessories www.adc.com • +1-952-938-8080 • 1-800-366-3891 14 Outdoor Fiber Distribution Terminal (oFDT) OmniReach™ Multi-Dwelling Unit Solutions Introduction The Outdoor Fiber Distribution Terminal (OFDT) is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment This terminal may be adapted to FTTX Multiple Dwelling Unit (MDU) applications by mounting the enclosure to the exterior surface of a dwelling and connecting between the distribution cable and drops routed to individual living units The OFDT-24 features a unique "swing frame" type design that seperates the splicing in the rear from the patch access in the front of the swing frame It allows for easy connector access to the rear connectors for maintenance and cleaning This approach allows for a single door sealing method, ensuring reliability to withstand long-term outdoor conditions The OFDT-48 is typically divided into two side-by-side sections with distribution cable routed into one side and drop cable routed into the other side The cables meet at a central connector field that includes termination for the distribution cable and parking for the drop cables and each side of the cabinet may be configured with splice trays for splicing the cable to connector pigtails The ODE may be preterminated on the distribution side with outside plant cable stubs so that the unit is quickly connected to the plant It can be pre-wired with pigtails on the drop side so that individual drops routed into the unit can be spliced to the connectorized pigtails The unit accommodates a variety of OSP cable types via sealed grommet entry Cables are secured with standard grip clamps to provide required pull out strength The enclosure provides grounding for metallic members and for the cabinet Features • Designed to accommodate 6-, 12-, 24- and 48-fibers including termination and parking • Environmental enclosure provides heavy-duty protection from wind, rain, and other contaminants • Lightweight structure provides for easy installation • Lockable tool or padlock offers flexible security options • Cable entrance ports seal cable at entry • Cable management and routing limits radius and adds strain relief • Wall mount; efficient use of wall space • All units come with a wall-mount bracket 4/08 • 102761AE • Aluminum welded construction provides strength and resists corrosion www.adc.com • +1-952-938-8080 • 1-800-366-3891 15 Outdoor Fiber Distribution Terminal (oFDT) OFDT-24 OFDT-48 Height: 13.5" (35 cm) 22.0 in (56 cm) Width: 19" (49 cm) 20.0 in (51 cm) Depth: 8" (20 cm) 10.0 in (25 cm) Weight (Empty): 14 lbs (31kg) 21.0 lbs (46 kg) Fiber Terminations: 6, 12, 24 Up to 48 Parking Adapters: 6, 12, 24 12, 24 or 48 Splice Trays: to 4/side Cable Ports: in bottom; in rear on bottom Color Beige Beige Ordering Information Catalog Number FDT - Stub Length Enclosure F OFDT-48 000 Feet G OFDT-24 025 25 Feet 100 100 Feet 200 200 Feet 300 300 Feet 500 500 Feet Connector Type J SC/APC Splice Tray Cable Type No tray Heat shrink fusion Pigtails Mechanical/Ribbon A Bare ribbon pigtail assy C Pigtails (Colored) Fiber Count Stubs S Ribbon OSP w/Conn 12 Fibers R Ribbon IFC w/Conn 24 24 Fibers T Loose tube OSP w/Conn 48 48 Fibers V Loose tube IFC w/Conn 06 Fibers 12 Pigtails Parking P Parking P Pigtails (2mm) N No parking X No pigtails 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Specifications www.adc.com • +1-952-938-8080 • 1-800-366-3891 16 Fiber Splitter Box (FSB) ADC’s new OmniReach® Fiber Splitter Box (FSB) enables customers to accelerate their FTTX deployments more effectively and is an ideal solution when deploying FTTX networks in non-residential Multiple Tenant Unit (MTU) and residential Multiple Dwelling Unit (MDU) applications These wall boxes provide a small footprint for splitting, splicing and terminating and are environmentally rated for indoor or outdoor use Available in three sizes, each box is equipped with a 12-fiber splice tray allowing for an input splicing option FSB’s accept standard plug and play (PNP) splitters (same as in the Fiber Distribution Hub 3000 or FDH 3000) and splitters can be easily added after the wall box has been installed FSB’s accommodate 1x4, 1x8, 1x16 and 1x32 splitters; up to 72 fibers FSB’s offer increased efficiency within distinct FTTX network applications Featuring a compact solution for wall mounting, these boxes provide a significant space savings while maintaining hand access to connectors The unique swing frame design also allows for easy access to the back section of the wall box For use in MTU’s, as well as garden style, mid-rise and high-rise MDU buildings, FSB’s allow for a de-centralized MDU-ONT (Optical Network Termination) architecture and offer an economical solution for MTU/MDU applications where a larger sized FDH is not economical, i.e strip malls and rural areas 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 17 Fiber Splitter Box (FSB) OmniReach™ Multi-Dwelling Unit Solutions Specifications 102761AE FSB-16 - Indoor/Outdoor Enclosure Installation Type: Fiber Count (Full): Parking Ports: Splitter/WDM Ports: Splice Trays: NEMA Rating: Height: Width: Depth: Features and Benefits • Accommodates up to 16 ports • Rated for indoor or outdoor use • Traditional swing frame design allows for access to the back section of the wall box • Splitter can be easily installed after wall box install • Standard 12-fiber splice tray allows for input splicing option • Output pigtails can either be stored internally or routed externally for MDU-ONT connection • Accepts standard PNP splitter (same as FDH 3000) 4/08 • Indoor/Outdoor 16 1/12f and 12 9" 9" 3.5" www.adc.com • +1-952-938-8080 • 1-800-366-3891 18 FSB-32 – Indoor Enclosure Features and Benefits Specifications • Dual hinge design creates separation between rear splitter section and front customer side access Installation Type: Fiber Count (Full): Parking Ports: Splitter/WDM Ports: Splice Trays: NEMA Rating: Height: Width: Depth: • Splitters can be easily installed after wall box install allowing for separate purchase • Standard 12-fiber splice tray allows for input splicing option • Accommodates up to 32 splitter ports for one splitter module Indoor 32 1/12f 12 8" 13" 5" • Dual hinge provides small footprint on the wall while maintaining excellent hand access to connectors • Accepts standard PNP splitter (same as FDH 3000) FSB-72 – Outdoor Enclosure Features and Benefits Specifications • Traditional swing frame design allows for access to the back section of the wall box Installation Type: Fiber Count (Full): Parking Ports: Splitter/WDM Ports: Splice Trays: NEMA Rating: Height: Width: Depth: • Splitter can be easily installed after wall box install • • Standard 12-fiber splice tray allows for input splicing option • Accommodates up to PNP splitter modules 4/08 102761AE OmniReach™ Multi-Dwelling Unit Solutions Fiber Splitter Box (FSB) • 72 port capacity with built-in 32-port parking • Easily wall mounts to buildings Outdoor 72 32 5/12f 13" 19" 10" • Accepts standard PNP splitter (same as FDH 3000) www.adc.com • +1-952-938-8080 • 1-800-366-3891 19 Fiber Splitter Box (FSB) Catalog Number FSB- S 10 11 11 Key Locks Configuration Standard Enclosure Type Code Description Capacity Size (HxWxD) B Indoor FSB-32 32-Fiber 8"x13"x5" G Outdoor FSB-72 72-Fiber 13"x19"x8" H Indr/Outdr FSB-16 16-Fiber 9"x9"x3.5" J SC/APC Splice Tray (Feeder Side) Heat Shrink Fusion Mechanical/Ribbon No Splice Tray 12 12 Fibers 16 16 Fibers 32 32 Fibers 48 48 Fibers 72 72 Fibers None Installed A 1x32 Standard C 1x16 Standard G 2x32 Standard Power J 1x8 Standard L Dual 1x8 Standard M Dual 1x16 Standard N 1x4 Standard P 2x16 Standard U Dual 1x4 Standard One (1) Installed Two (2) Installed Three (3) Installed B Front Lock 1, Rear Lock C Front Lock 1, No Rear Lock D Rear Lock 2, No Front Lock No Stub 2 Fibers 4 Fibers 6 Fibers 8 Fibers 000 Feet 025 25 Feet 100 100 Feet 200 200 Feet 300 300 Feet 500 500 Feet Adapters Adapters Only (No Pigtail for Feeder) Pigtails A Splice Ribbon Pigtail Assy C Splice Pigtails (900 Micron) Stubs S Ribbon OSP Cable R Ribbon IFC Cable T Loose Tube OSP Cable V Loose Tube IFC Cable M 900um IFNR Cable 4/08 • None Front Lock 1, Rear Lock Cable Type (Feeder Cable) Splitter Qty Installed None (Pad Lock Ready) Feeder Cable Length Splitter Type Installed Fiber Count (Distribution) A 10 Feeder Fiber Count Connector Type 102761AE OmniReach™ Multi-Dwelling Unit Solutions Ordering Information www.adc.com • +1-952-938-8080 • 1-800-366-3891 20 Indoor Fiber Distribution Terminal (iFDT) The Indoor Fiber Distribution Terminal (iFDT) provides Multiple Dwelling Unit (MDU) applications with a compact and secure family of enclosures for connecting fiber cables at MDU's The IFDT products utilize a rugged double-hinged design that effectively isolates the splicing and cable termination in the rear compartment from the jumper interconnection in the front compartment Separating the cable splicing and termination into a layered configuration provides a space efficient and craft friendly interface unit The layered iFDT staggered interconnection field provides ease of access to all connections The iFDT enclosure provides standard SC/APC connections and parking adapters for locating the connectorized pigtails prior to deployment Features • Designed to splice and terminate 6-, 12-, 24- and • Front and rear layer maximizes wall space utilization for both splicing and interconnect 48-fibers • Integrated splice tray offers flexible splice management for individual or mass splicing • Sealed enclosure protects fibers from dust, water spray, insects and other contaminants • Dual-hinged design ensures separation of owner/ client network segments • Robust steel construction protects fibers against damage and ensures network reliability • Slotted cable entrance ports allow for rapid cable installation and pass-through capability • Cable management and routing limits bend radius and adds strain relief • 216-Tool (can wrench), key lock or padlock offers • NEMA-12 Rated • Tested to GR-2898-CORE flexible security options 6-Port 12-Port 24-Port 48-Port 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 21 Indoor Fiber Distribution Terminal (iFDT) 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Specifications Fibers: 12 24 48 Parking Adapters: 12 24 48 Splice Trays: 1/12f 2/12f 4/12f 8/12f Grip Clamps: 1 1 Jumper Ports: 3 3 NEMA Rating 12 12 12 12 Height: 7.0" (17.8 cm) 8.0" (20.3 cm) 18.5" (47.0 cm) 32.0" (81.3 cm) Width: 12.0" (30.5 cm) 14.0" (35.5 cm) 13.0" (33.0 cm) 13.0" (33.0 cm) Depth: 3.0" (7.6 cm) 5.0" (12.7 cm) 5.0" (12.7 cm) 5.0" (12.7 cm) Color: CO White CO White CO White CO White Ordering Information Catalog Number FDT- Stub Length Enclosure Type Max Capacity 000 Feet Code Desc w/Prkg w/o Prkg 025 25 Feet A IFDT-6/12 6-Fiber 12-Fiber 100 100 Feet B IFDT-12/24 12-Fiber 24-Fiber 200 200 Feet C IFDT-24/48 24-Fiber 48-Fiber 300 300 Feet E IFDT-48/96 48-Fiber 96-Fiber 500 500 Feet Connector Type J Cable Type SC/APC Pigtails Splice Tray A Bare Rbn Pgtl Assy C Pigtails (Colored) No Tray Stubs Heat Shrink Fusion S Ribbon OSP w/Conn Mechanical/Ribbon Fiber Count 06 Fiber 12 12 Fibers 24 24 Fibers 48 48 Fibers 72 72 Fibers 96 96 Fibers www.adc.com R Ribbon IFC w/Conn T Loose Tube OSP w/Conn V Loose Tube IFC w/Conn Pigtails P Pigtails (2mm) X No Pigtails Parking • +1-952-938-8080 • P Parking N No Parking 1-800-366-3891 22 Reduced Bend Radius Fiber MDU Drop Cables ADC's OmniReach Reduced Bend Radius Fiber MDU Drop Cables are an ideal solution for the unique challenges encountered when deploying FTTX networks in today’s Multiple Dwelling Unit or MDU buildings Reduced Bend Radius MDU Drops are offered in Indoor/Outdoor, Riser and Plenum cable types making them suitable for all types of MDU structures Reduced Bend Radius MDU Drops allow for a bend radius as small as 7.5 mm without changing attenuation characteristics of the cable and improve insertion loss (IL) performance for 90 degree bend locations With the average MDU installation including as many as seven 90 degree turns, this new fiber greatly reduces the risk to bend induced IL during installation In addition to the improved bend radius performance, the rugged 3mm cable construction provides the flexibility and durability to withstand the most demanding applications The rugged mm indoor/outdoor cable can be stapled*, allowing for fast and easy securing of cables to most surfaces The reduced bend radius glass allows the technician to staple around tight corners without compromising insertion loss performance ADC’s Reduced Bend Radius MDU Drops provide for quick and easy deployments with increased reliability which allow for fast service turn-up, improved network reach and lower overall network operating and maintenance costs *ADC approved staplers and staples Features • Bend radius as small as 7.5mm without changing cable characteristics • Greatly reduces risks to bend induced insertion loss created during installation • Indoor/Outdoor, Plenum and Riser cable options available • Rugged mm cable jacket construction • G.657 Table A and B compliant • Two cable configurations available: connectors on both ends or connector on one end • Spooling options: end with connector pulled first or end without connector pulled first • Ivory cable color helps distinguish cable in the field 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 23 Reduced Bend Radius Fiber MDU Drop Cables Catalog Number MDC- - Connector Type J APC SC N UPC SC Spool Option Connector Type J APC SC N UPC SC Stub No Spool J Standard Spool F Spooled Connector First L Spooled Connector Last Standard Cable Measurement Number of Fibers F Feet M Meters One Standard Cable Lengths Cable Type (RBR) Reduced Bend Radius F RBR Indoor/Outdoor Ivory G RBR Plenum Ivory H RBR Riser Ivory 0010 10 0050 50 0100 100 0150 150 0200 200 0250 250 0500 500 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions Ordering Information www.adc.com • +1-952-938-8080 • 1-800-366-3891 24 Multi-Dwelling Unit Solutions Index FD3-PMFC06 14 FD3-PMFE06 14 FD3-PMFJ06 14 FD3-RSRC06 13 FD3-RSRE06 13 FD3-RSRJ06 13 FD3MOD-072JGAB 14 FD3MOD-072JJAB 14 FD3MOD-072JLAB 14 FD3MOD-072JTAB 14 FMS-ACE100-KIT-A 14 FMS-FD3C-KIT-A 14 FMS-FD3J-KIT-A 14 FPC-CLNKIT1 13 O OSP-216BKEY1 13 OSP-216BKEY2 13 OSP-216BKEY3 13 4/08 • 102761AE OmniReach™ Multi-Dwelling Unit Solutions F www.adc.com • +1-952-938-8080 • 1-800-366-3891 25 OmniReach™ FTTX Solutions Website: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products orfeatures contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer 102761AE 4/08 Revision © 2008, 2007 ADC Telecommunications, Inc All Rights Reserved [...]... 102761AE OmniReach Multi- Dwelling Unit Solutions Specifications www.adc.com • +1-952-938-8080 • 1-800-366-3891 16 Fiber Splitter Box (FSB) ADC’s new OmniReach Fiber Splitter Box (FSB) enables customers to accelerate their FTTX deployments more effectively and is an ideal solution when deploying FTTX networks in non-residential Multiple Tenant Unit (MTU) and residential Multiple Dwelling Unit (MDU) applications. .. Network Termination) architecture and offer an economical solution for MTU/MDU applications where a larger sized FDH is not economical, i.e strip malls and rural areas 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 17 Fiber Splitter Box (FSB) OmniReach Multi- Dwelling Unit Solutions Specifications 102761AE FSB-16 - Indoor/Outdoor Enclosure... Multi- Dwelling Unit Solutions FDH 3000 and FDH 3000i Accessories www.adc.com • +1-952-938-8080 • 1-800-366-3891 14 Outdoor Fiber Distribution Terminal (oFDT) OmniReach Multi- Dwelling Unit Solutions Introduction The Outdoor Fiber Distribution Terminal (OFDT) is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment This terminal may be adapted to FTTX Multiple Dwelling. .. 0 A 10 Feeder Fiber Count 3 Connector Type 102761AE OmniReach Multi- Dwelling Unit Solutions Ordering Information www.adc.com • +1-952-938-8080 • 1-800-366-3891 20 Indoor Fiber Distribution Terminal (iFDT) The Indoor Fiber Distribution Terminal (iFDT) provides Multiple Dwelling Unit (MDU) applications with a compact and secure family of enclosures for connecting fiber cables at MDU's The IFDT products... Rated • Tested to GR-2898-CORE flexible security options 6-Port 12-Port 24-Port 48-Port 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions Introduction www.adc.com • +1-952-938-8080 • 1-800-366-3891 21 Indoor Fiber Distribution Terminal (iFDT) 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions Specifications Fibers: 6 12 24 48 Parking Adapters: 6 12 24 48 Splice Trays: 1/12f 2/12f 4/12f... Indoor/Outdoor Ivory G RBR Plenum Ivory H RBR Riser Ivory 0010 10 0050 50 0100 100 0150 150 0200 200 0250 250 0500 500 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions Ordering Information www.adc.com • +1-952-938-8080 • 1-800-366-3891 24 Multi- Dwelling Unit Solutions Index FD3-PMFC06 14 FD3-PMFE06 14 FD3-PMFJ06 14 FD3-RSRC06 13 FD3-RSRE06 13 FD3-RSRJ06 ... loose tube 1-800-366-3891 7 Indoor Fiber Distribution Hub OmniReach Multi- Dwelling Unit Solutions FDH 3000i ADC’s OmniReach Indoor Fiber Distribution Hub 3000 series cabinets (FDH 3000i) are designed to organize and administer fiber optic cables and passive optical splitters in an inside plant environment typically found at the Multiple Dwelling Unit (MDU) These cabinets are used to connect feeder and... OSP-216BKEY1 13 OSP-216BKEY2 13 OSP-216BKEY3 13 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions F www.adc.com • +1-952-938-8080 • 1-800-366-3891 25 OmniReach FTTX Solutions Website: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our... standard 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions FDH 3000 and FDH 3000i Splitter Module www.adc.com • +1-952-938-8080 • 1-800-366-3891 12 Fiber Distribution Hub 216 Tools – Can Wrench Keys Ordering Information Description Ordering Number Nickel plated brass can wrench key For use in loosening/tightening security screws OSP-216BKEY1 Aluminum can wrench key For use in loosening/tightening... Drop Cables ADC's OmniReach Reduced Bend Radius Fiber MDU Drop Cables are an ideal solution for the unique challenges encountered when deploying FTTX networks in today’s Multiple Dwelling Unit or MDU buildings Reduced Bend Radius MDU Drops are offered in Indoor/Outdoor, Riser and Plenum cable types making them suitable for all types of MDU structures Reduced Bend Radius MDU Drops allow for a bend radius ... 102761AE OmniReach Multi- Dwelling Unit Solutions Applications www.adc.com • +1-952-938-8080 • 1-800-366-3891 Fiber Distribution Hub OmniReach Multi- Dwelling Unit Solutions FDH 3000 ADC’s OmniReach ... 102761AE OmniReach Multi- Dwelling Unit Solutions Introduction 1-4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Multi- Dwelling Unit Solutions Fiber-to-the-X (FTTX) network applications. .. ground 4/08 • 102761AE OmniReach Multi- Dwelling Unit Solutions FDH 3000 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Fiber Distribution Hub OmniReach Multi- Dwelling Unit Solutions FDH 3000 –