Pnipaam modified PCL matrix for in vitro cell culture study

PNIPAAM MODIFIED PCL MATRIX FOR IN VITRO CELL CULTURE STUDY LUO XUAN NATIONAL UNIVERSITY OF SINGAPORE 2007 PNIPAAM MODIFIED PCL MATRIX FOR IN VITRO CELL CULTURE STUDY LUO XUAN B.Sci., Zhejiang University A THESIS SUBMITTED FOR THE DEGREE OF MASTER OF SCIENCE GRADUATE PROGRAMME IN BIOENGINEERING NATIONAL UNIVERSITY OF SINGAPORE ACKNOWLEDGEMENTS This thesis grew out of a series of trials and experiments for the idea of an interdisciplinary project, from which I benefited and learned quite a lot I would like to gratefully acknowledge Prof Teoh Swee Hin’s efforts during this work and the precious opportunity provided for me to propose and execute this project I would like to thank Professor Ding Jeak Ling and Associate Professor Ho Bo very much for the insightful thoughts, constant guidance, and detailed instruction My sincere thanks also go to Doctor Li Jun, who has been kindly offering experiment equipments and technical support, and Doctor Tong Yen Wah for the PNIPAAm polymer provided I am grateful to all my classmates and friends from different labs at my study, without whose help this thesis wouldn’t have appeared Finally, I am forever indebted to my parents It would be unimaginable for me to overcome all the difficulties when one of them has been suffering from the serious disease, if it were not their understanding, support and encouragement TABLE OF CONTENTS Summary List of Tables List of Figures Introduction 1.1 Poly(ε-caprolactone) 1.1.1 Background 1.1.2 Physical and chemical properties 1.1.3 Major biomedical applications of PCL 1.1.3.1 Drug delivery system 1.1.3.2 Internal fixation 1.1.3.3 Membrane implantation 1.1.3.4 Skin coverings for wounds 1.1.4 PCL scaffolds manufactured by fused deposition modelling (FDM) 1.2 Poly(N-isopropyl acrylamide) 1.2.1 History 1.2.2 Physical and chemical properties 1.2.3 Major biomedical applications of PNIPAAm 1.2.3.1 Phase separation and “molecule gate” 1.2.3.2 Two dimensional cell sheet technology 1.2.3.3 Polymeric carriers Materials and methods 2.1 Physical coating of PNIPAAm onto PCL scaffolds 2.1.1 Materials 2.1.2 Methods 2.2 Chemical grafting of PNIPAAm 2.2.1 3D grafting of PNIPAAm onto PCL scaffolds 2.2.1.1.Materials 2.2.1.2.Preparation of purified NIPAAm and polymerization solution 2.2.1.3.Plasma treatment polymerization 2.2.2 2D grafting of PNIPAAm onto PCL films 2.2.2.1.Materials 2.2.2.2.Methods 2.2.2.2.1 Preparation of purified NIPAAm and polymerization solution 2.2.2.2.2 Preparation of PCL films 2.1.1.1.1 Plasma treatment 2.1.1.1.2 U.V polymerization 2.1.1.1.3 Water contact angle measurements 2.1.1.1.4 Cell seeding and culture 2.1.1.1.5 MTS assay 2.1.1.1.6 Confocal laser scanning microscopy (CLSM) 2.1.1.1.7 Scanning electron microscopy (SEM) Results, discussion 3.1.1 Physical coating of PNIPAAm onto PCL scaffolds 3.1.2 Chemical grafting of PNIPAAm 3.1.3 3D grafting of PNIPAAm onto PCL scaffolds 3.1.4 2D grafting of PNIPAAm onto PCL films Conclusion Bibliography SUMMARY 2D cell sheet technology with the aid of PNIPAAm temperature responsive changes on the hydrophobicity was already invented and widely applied as reviewed earlier PNIPAAm caught much attention in recent years mainly because of its LCST of 32℃ , which is close to human body and cell culture temperature, and moreover, adjustable by adding in functional groups bearing different hydrophobicity during the polymerization procedure The idea, development of 2D cell sheet technology into 3D in vivo cell culture instrument came from the high volume/space ratio 3D structure, especially PCL scaffolds, provided In the research, the 3D exploration did not achieve as expected, partially due to the low crystallization point of PCL and limits in 3D grafting PCL scaffolds did not withstand the last heat treatment step of the whole PNIPAAm chemical grafting process However, the change of morphology and N% on 3D physically coated PCL scaffolds still indicates how different that a PNIPAAm layer may assist in cell culture, in vitro Further investigations about 3D cell harvest can by done by selecting other scaffolds that may undergo the temperature required for 3D chemical grafting Moreover, verified by the drop in water contact angle experiment, MTS assay, SEM result and confocal microscopy images, the PNIPAAm chemical grafting onto 2D PCL I films was well targeted and established The 2D PNIPAAm grafted matrix greatly supported cell culture with the non-cytotoxic character PCL exhibited II LIST OF TABLES Table 1.1 Fact sheet of microsphere based PCL or PCL blended Table 1.2 Fact sheet of microsphere based PCL co-polymers Table 1.3 Fact sheet of nanosphere based PCL or PCL blended Table 1.4 Fact sheet of nanosphere based PCL co-polymers III LIST OF FIGURES Figure 1.1 Structure of monomer ε-caprolactone and polymer PCL Figure 1.2 Brief illustration of the basic FDM process Figure 1.3 (a) Lay-down pattern of 0º/90º/0º forming square honeycomb scaffolds Its frontal (b) and lateral view (c) under electronic microscope Figure 1.4 (a) Lay-down pattern of 0º/60º/120º forming square honeycomb scaffolds Its frontal (b) and lateral view (c) under electronic microscope Figure 1.5 Structure of monomer N-isopropylacrylamide and polymer PNIPAAm Figure 1.6 Schematic illustration of the variety of natural or synthetic biomolecules which may be conjugated to a smart polymer In some cases, only one molecule may be conjugated, such as a recognition protein, which may be linked to the protein at a reactive terminal group of the polymer, or it may be linked at a reactive pendant group along the polymer backbone In other cases more than one molecule may be onjugated along the polymer backbone, such as a targeting ligand along with many drug molecules Figure 1.7 Copolymerization of a thermally sensitive polymer, PNIPAAm, with a more hydrophilic comonomer, AAm, raises the LCST of the copolymer, while copolymerization with a more hydrophobic comonomer, N-test butylacrylamide (N-tBAAm), lowers the LCST Figure 1.8 Various types of random and site-specific smart polymer-protein conjugates Figure 1.9 Schematic illustration of the stimuli-induced phase-separation of a random conjugate of a smart polymer and a ligand that is complexed with a recognition protein Figure 1.10 (a) Schematic illustration of the stimuli-induced phase-separation of a random conjugate of a smart polymer and a recognition protein coupled to a specific analyte which is coupled to a second, labeled recognition protein, to form a smart polymer-immune complex sandwich conjugate (b) Schematic illustration of the same process carried out with one test sample, in order to assay two separate analytes in the same sample by using two different smart polymers having different LCSTs IV BIBLIOGRAPHY Van Natta FJ Hill J W, Carothers W H Studies of Polymerization and Ring Formation XXIII ε-Caprolactone and its Polymers J Am Chem Soc 1934; 56: 455-7 Chang, R.K., Price, J.C., Whitworth, C.W., 1986 Dissolution characteristics of poly (ε-carolactone)-polylactide microspheres of chlorpromazine Drug Dev Ind Pharm 12, 2355–2380 V.R Sinha, K Bansal, R Kaushik, R Kumria, A Trehan.Poly-caprolactone microspheres and nanospheres: an overview University Institute of Pharmaceutical Sciences, Panjab University, Chandigarh 160014, India Chen, D., Chen, H., Bei, J., Wang, S., 2000 Morphology and biodegradation of microspheres of polyester-polyether block copolymer based on polycaprolactone/polylactide/ poly(ethylene oxide) Polym Int 49, 269–276 Marra K G, Campbell P G, Dimilla P A, Kumta P N, Mooney M P, Szem J W, etal Novel three dimensional biodegradable scaffolds for bone tissue engineering Mater Res Soc Symp Proc 1999; 550:155-60 Corden T J, Jones I A, rudd C D, Christian P, downes S, McDougall K E Physical and biocompatibility properties of poly-ε-caprolactone produced using in situ polymerization: a novel manufacturing technique for long –fibre composite materials Biomaterials 2000; 21:713-24 40 Hutmacher D W Polymeric scaffolds in tissue engineering bone and cartilage Biomaterials 2000; 21:2528-43 Darney P D, Monroe S E, Klaisle C M, Alvarado A Clinical evaluation of the capronor contraceptive implant: preliminary report Am J Obstet Gynecol 1989; 160:1292-5 Pitt C G Poly-caprolactone, copolymers In: Chasin M, Langer R., editors Biodegradable polymers in drug delivery systems New York: marcel Dekker Inc., 1990:71-120 10 Thombre, A.G., Cardinal, J.R., 1990 Biopolymers for controlled drug delivery In: Swarbick, J., Boylan, J.C (Eds.), Encyclopedia of Pharmaceutical Technology, vol Marcel Dekker, New York, pp 61–88 11 Koleske, J.V., 1978 Blends containing poly(ε-caprolactone) and related polymers In: Paul, D.R., Newman, S (Eds.), Polymer Blends, vol Academic Press, New York, pp 369–389 12 Jameela, S.R., Suma, N., Misra, A., Raghuvanshi, R., Ganga, S., Jayakrishnan, A., 1996 Poly (ε-Caprolactone) microspheres as a vaccine carrier Curr Sci 70, 669– 671 13 Jameela, S.R., Suma, N., Jayakrishana, A., 1997 Protein release from poly (epsilon-caprolactone) microspheres prepared by melt encapsulation and solvent evaporation techniques: a comparative study J Biomater Sci Polym 8, 457–466 14 Youan, B.B.C., Benoit, M.A., Baras, B., Gillbard, J., 1999a Protein-loaded poly(ε-caprolactone) microparticles, optimization of the preparation by (water-inoil) in-water emulsion solvent evaporation J Microencapsul 16, 587–599 41 15 Murillo, M., Gamazo, C., Goni, M., Irache, J., Blanco-Prieto, M., 2002 Development of microparticles prepared by spray-drying as a vaccine delivery system against brucellosis Int J Pharm 242, 341–344 16 Perez, M.H., Zinutti, C., Lamprecht, A., Ubrich, N., Astier, A., Hoffman, M., Bodmeier, R., Maincent, P., 2000 The preparation and evaluation of poly(εcaprolactone) microsparticles containing both lipophillic and hydrophilic drug J Control Rel 65, 429–438 17 Dordunoo, S.K., Jackson, J.K., Arsenault, L.A., Oktaba, A.M., Hunter, W.L., Burt, H.M., 1995 Taxol encapsulation in poly (epsilon-caprolactone) microspheres Cancer Chemother Pharmacol 36, 279–282 18 Sondhof, A.F., Mallapragada, S., Booth, L.C., Heath, C., Rosenbusch, R., Apley, M., Hsu, W., 1998 Polylactic acid (biodegradable) microspheres for sustained antimicrobial drug release in the equine joint: preliminary in vivo results Int J Symp Control Rel Bioact Mater 25, 651–652 19 Giunchedi, P., Conti, B., Maggi, L., Conte, U., 1994 Cellulose acetate butyrate and polycaprolactone for ketoproton spray-dried microsphere preparation J Microencapsul 11, 381–393 20 Das, G.S., Rao, G.H., Wilson, R.F., Chandy, T., 2000 Colchicine encapsulation within poly (ethylene glycol)-coated poly (lactic acid)/poly (epsilon-caprolactone) microspheres-controlled release studies Drug Deliv.7, 129–138 21 Chang, R.K., Price, J.C., Whitworth, C.W., 1986 Dissolution characteristics of poly (ε-carolactone)-polylactide microspheres of chlorpromazine Drug Dev Ind Pharm 12, 2355–2380 42 22 Chang, R.K., Price, J.C., Whitworth, C.W., 1987a Control of drug release rate by use of mixtures of poly (ε-caprolactone) and cellulose acetate butyrate polymers Drug Dev Ind Pharm 13, 1119–1135 23 Chang, R.K., Price, J.C., Whitworth, C.W., 1987b Enhancement of dissolution rate by incorporation into a water insoluble polymer, poly (ε-caprolactone) Drug Dev Ind Pharm 13, 249–256 24 Aberturas, M.R., Molpeceres, J., Guzman, M., Garcia, F., 2002 Development of a new cyclosporine formulation based on poly (caprolactone) microspheres J Microenacpsul 19, 61–72 25 Chandy, T., Wilson, R.F., Rao Gundu, H.R., Das, G., 2002 Changes in cisplatin delivery due to surface-coated poly (lactic acid)-poly(epsilon-caprolactone) microspheres J Biomater Appl 16, 275–291 26 Dickerson, J.B., Blackwell, J.E., Ou, J.J., Patil, V.R.S., Goetz, D.J., 2001 Limited adhesion of biodegradable microspheres to Eand P-selectin under flow Biotehnol Bioeng 73, 500–509 27 Jackson, J.K., Liang, L.S., Hunter, W.L., Reynolds, M., Sandberg, J.A., Springate, C., Burt, H.M., 2002 The encapsulation of ribozymes in biodegradable polymeric matrices Int J Pharm 243, 43–55 28 Yang, Y.Y., Chung, T.S., Ping Ng, N., 2001 Morphology, drug distribution, and in vitro release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method Biomaterials 22, 231–241 43 29 Atkins, T.W., 1997 Fabrication of microspheres using blends of poly(ethylene adipate) and poly(ethylene adipate)/poly (hydroxybutyrate-hydroxyvalerate) with poly (caprolactone): incorporation and release of bovine serum albumin J Biomater Sci., Polym Ed 8, 833–845 30 Huatan, H., Collett, J.H., Attwood, D., 1995 The microencapsulation of protein using a novel ternary blend based on poly (ε-caprolactone) J Microencapsul 12, 557–565 31 Lin, W.J., Yu, C.C., 2001 Comparison of protein loaded poly(epsiloncaprolactone) microparticles prepared by the hot-melt technique J Microencapsul 18, 585–592 32 Lin, W.J., Huang, L.I., Chang, R.R., 2001 Characterization of protein-loaded poly(epsilon-caprolactone) microparticles based on a factorial design J Microencapsul 18, 183–189 33 Lin, W.J., Huang, L.I., 2001b Fabrication of porous poly(epsilon-caprolactone) microparticles for protein release J Microencapsul 18, 577–584 34 Gadzinowski, M., Slomkowski, S., Elaissari, A., Pichot, C., 2000 Phase transfer and characterization of poly (ε-caprolactone) and poly(l-lactide) microspheres J Biomater Sci., Polym Ed 11, 459–480 35 Cao, X., Shoichet, M.S., 1999 Delivering neuroactive molecules from biodegradable microspheres for application in central nervous disorders Biomaterials 20, 329–339 44 36 Bodmeier, R., Chen, H., 1989 Preparation and characterization of microspheres containing the anti-inflammatory agents, indomethacin, ibuprofen, and ketoporofen J Control Rel 7, 69–78 37 Calvo, P., Sanchez, A., Martinez, J., Lopez, M.I., Calonge, M., Pastor, J.C., Alonso, M.J., 1996c Polyester nanocapsules as new topical ocular delivery systems for cyclosporin A Pharm Res 13, 1423 38 Shenoy, D.B., D’Souza, R.J., Tiwari, S.B., Udupa, N., 2003 Potential applications of polymeric microsphere suspension as subcutaneous depot for insulin Drug Dev Ind Pharm 29, 555–563 39 Gibaud, S., Bonneville, A., Astier, A., 2002 Preparation of 3,4-diaminopyridine microparticles by solvent-evaporation methods Int J Pharm 242, 197–201 40 Jiao, Y.Y., Ubrich, N., Hoffart, V., Marchand-Arvier, M., Vigneron, C., Hoffman, M., Maincent, P., 2002 Preparation and characterization of heparin-loaded polymeric microparticles Drug Dev Ind Pharm 28, 1033–1041 41 Iooss, P., Le Ray, A.M., Grimandi, G., Daculsi, G., Merle, C., 2001 A new injectable bone substitute combining poly(epsiloncaprolactone) microparticles with biphasic calcium phosphate granules Biomaterials 22, 2785–2794 42 Pitt, C.G., Gratzl, M.M., Kimmel, G.L., Surles, J., Schindler, A., 1981 Aliphatic polyesters II The degradation of poly (d,l-lactide), poly(ε-caplrolactone) and their copolymers in vivo Biomaterials 2, 215 43 Buntner, B., Nowak, M., Bero, M., Dobrzynski, P., Kasperczyk, J., 1996 Controlled release of 17_-estradiol from d,l-lactide/ε- caprolactone copolymers J Bioact Compat Polym 11, 110– 116 45 44 Buntner, B., Nowak, M., Kasperczyk, U.J., Ryba, M., Grieb, P., Walski, M., Dobrzynski, P., Bero, M., 1998 The application of microspheres from the copolymers of lactide and caprolactone to the controlled release of steroids J Control Rel 56, 159– 167 45 Martini, L.G., Collett, J.H., Attwood, D., 2000 The release of 5-FU from microspheres of poly (ε-caprolactone-co-ethyleneoxide) Drug Dev Ind Pharm 26, 7–12 46 Guerra, G.D., Tricoli, M., Maltinti, S., 2001 Release of 5- FU by biodegradable poly-(ester-ether-ester)s Part release by fused thin sheets J Mater Sci: Mater Med 12, 313–317 47 Limin, M., Yuzhin, Z.Q.L., Zhongwel, G., 2000 Study on preparation and pharmacodynamics of insulin-loaded polyester microparticles Yaoxue Xuebao 35, 850–853 48 Barbato, F., Rotonda, M.I.L., Maglio, G., Palumbo, R., Quaglia, F., 2001 Biodegradable microspheres of novel segmented poly (ether-ester-amide)s based on poly(ε-caprolactone) for the delivery of bioactive compounds Biomaterials 22, 1371–1378 49 Cha, Y., Pitt, C.G., 1988 A one week subdermal delivery system for l-methadone based on biodegradable microcapsules J Control Rel 7, 69–78 50 Tarvainen, T., Malin, M., Suutari, T., Pollanen, M., Tuominen, J., Seppala, J., Jarvinen, K., 2003 Pancreatin enhanced erosion of and macromolecule release from 2,2-bis (2-oxazoline)-linked poly(epsilon-caprolactone) J Control Rel 86, 213– 222 46 51 Calvo, P., Alonso, M.J., Vila-Jato, J.L., Robinson, J.R., 1996a Improved ocular bioavailability of Indomethacin by novel ocular drug carriers J Pharm Pharmacol 48, 1147–1152 52 Calvo, P., Vila-Jato, J.L., Alonso, M.J., 1996b Comparative in vitro evaluation of several colloidal systems, nanoparticles, nanocapsules and nanoemulsions, as ocular drug carriers J Pharm Sci 85, 530–536 53 Marchal-Heussler, L., Sirbat, D., Hoffman, M., Maincent, P., 1993 Poly(epsiloncapralactone) nanocapsule in cartelol ophthalmic delivery Pharm Res 10, 386– 390 54 Lacoulonche, F., Gamisans, F., Chauvet, A., Garcia, M.L., Epsina, M., Egea, M.A., 1999 Stability and in vitro drug release of Flurbiprofen loaded poly (εcaprolactone) nanospheres Drug Dev Ind Pharm 25, 983–993 55 Gamisans, F., Lacoulonche, F., Chauvet, A., Espina, M., Garcia, M.L., Egea, M.A., 1999 Flurbiprofen loaded nanospheres: analysis of the matrix structure by thermal methods Int J Pharm 179, 37–48 56 Ferranti, Y., Maochais, H., Chabenat, C., Orecchioni, A.M., Lafont, O., 1999 Primidone-loaded poly (ε-caprolactone) nanocapsules: incorporation efficiency and in vitro release profile Int J Pharm 193, 107–111 57 Alonso, M.J., Garcia, M.L., Epsina, M., Valls, O., Egea, M.A., 2000 Aclofenacloaded poly-ε-caprolactone nanocapsules Effects of coadjuvants on morphological properties and drug entrapment Bollettino Cheimico Farmaceutico 139, 114–119 47 58 Muller, C.R., Schaffazick, S.R., Pohlmann, A.R., DeLucca, F.L., Pesce Da Silveira, N., Dalla Costa, T., Guterres, S.S., 2001 Spray-dried diclofenac-loaded poly(ε-caprolactone) nanocapsules and nanospheres Preparation and physicochemical characterization Pharmazie 56, 864–867 59 Guterres, S.S., Muller, C.R., Michalowski, C.B., Pohlmann, A.R., Dalla Costa, T., 2001 Gastrointestinal tolerance following oral administration of spray dried diclofenac loaded nanocapsules and nanospheres S.T.P Pharm Sci 11, 229–233 60 Espuelas, M.S., Legrand, P., Iranche, J.M., Gamazo, C., Orecchioni, A.M., Devissaguet, J.P., Ygartua, P., 1997 Poly(ε-caprolactone) nanospheres as an alternative way to reduce amphotericin B toxicity Int J Pharm 158, 19–27 61 Espuelas, M.S., Legrand, P., Cheron, M., Barrat, G., Puisieux, F., Renedo, M.J., Devissaguet, J.P., Iranche, J.M., 1998 Interaction of Amphotericin B with polymeric colloids: Effect of Poloxamer on the adsorption of amphotericin B onto poly(ε-caprolactone) nanospheres Colloids Surf., B: Biointerf 11, 203–212 62 Espuelas, M.S., Legrand, P., Loiseau, P.M., Bories, C., Barratt, G., Irache, J.M., 2002 In vitro antileishmanial activity of amphotericin B loaded in poly(epsiloncaprolactone) nanospheres J Drug Target 10, 593–599 63 Guzman, M., Molpeceres, J., Aberturas, M.R., Rodriguez, M., 1993 Formation and characterization of cyclosporin loaded nanoparticles J Pharm Sci 82, 498– 502 64 Calvo, P., Sanchez, A., Martinez, J., Lopez, M.I., Calonge, M., Pastor, J.C., Alonso, M.J., 1996c Polyester nanocapsules as new topical ocular delivery systems for cyclosporin A Pharm Res 13, 1423 48 65 Molpeceres, J., Chacon, M., Guzman, M., Berges, L., del Rosario Aberturas, M., 1999 A polycaprolactone nanoparticle formulation of cyclosporin A improves the prediction of area under the curve using a limited sampling strategy Int J Pharm 187, 101–113 66 Molpeceres, J., Aberturas, M.R., Guzman, M., 2000 Biodegradable nanoparticles as a delivery system for cyclosporine: preparation and characterization J Microencapsul 17, 599–614 67 Varela, M.C., Guzman, M., Molpeceres, J., del Rosario Aberturas, M., RodriguezPuyol, D., Rodriguez-Puyol, M., 2001 Cyclosporine loaded polycaprolactone nanoparticles: immunosuppression and nephrotoxicity in rats Eur J Pharm Sci 12, 471–478 68 Guzman, M., Aberturas, M.R., Rodriguez-Puyol, M., Molpeceres, J., 2000 Effect of nanoparticles on digitoxin uptake and pharmacologic activity in rat glomerular mesangial cell cultures Drug Deliv 7, 215–222 69 Cauchetier, E., Deniau, M., Fessi, H., Astier, A., Paul, M., 2003 Atovaquoneloaded nanocapsules: influence of the nature of the polymer on their in vitro characteristics Int J Pharm 250, 273–281 70 Chawla, J.S., Amiji, M.M., 2002 Biodegradable poly(epsiloncaprolactone) nanoparticles for tumor-targeted delivery of tamoxifen Int J Pharm 249, 127– 138 71 Losa, C., Alonso, M.J., Vila, J.L., Orallo, F., Martinez, J., Saavedra, J.A., Pastor, J.C., 1992 Reduction of cardiovascular side effects associated with ocular 49 administration of metipranolol by inclusion in polymeric nanocapsules J Ocul Pharmacol 8, 191–198 72 Losa, C., Marchal-Heussler, L., Orallo, F., Vila Jato, J.L., Alonso, M.J., 1993 Design of new formulations for topical ocular administration: polymeric nanocapsules containing metipranolol Pharm Res 10, 80–87 73 Leroueil-Le Verger, M., Fluckiger, L., Kim, Y.I., Hoffman, M., Maincent, P., 1998 Preparation and characterization of nanoparticles containing an antihypertensive agent Eur J Pharm Biopharm 46, 137–143 74 Lamprecht, A., Ubrich, N., Hombreiro Perez, M., Lehr, C., Hoffman, M., Maincent, P., 2000 Influences of process parameters on nanoparticle preparation performed by a double emulsion pressure homogenization technique Int J Pharm 196, 177–182 75 Kim, S.Y., Ha, J.C., Lee, Y.M., 2000 Poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide)/poly (ε-caprolactone) amphiphillic block copolymeric nanospheres, thermo responsive drug release behaviors J Control Rel 65, 345–348 76 Kim, S.Y., Lee, Y.M., Shin, H.J., Kang, J.S., 2001 Indomethacinloaded methoxypoly (ethylene glycol)/ poly(ε-caprolactone) diblock copolymer nanospheres: pharmacokinetic characterstics of indimethacin in normal Sprague Dawley rats Biomaterials 22, 2049–2056 77 Kim, S.Y., Lee, Y.M., 2001 Taxol-loaded block copolymer nanospheres composed of methoxy poly(ethylene glycol) and poly (epsilon-caprolactone) as novel anticancer drug carriers Biomaterials 22, 1697–1704 50 78 Lu, Z., Bei, J., Wang, S., 1999 A method for the preparation of polymeric nanocapsules without stabilizer J Control Rel 61, 107–112 79 Ryu, J., Jeong, Y.I., Kim, I.S., Lee, J.H., Nah, J.W., Kim, S.H., 2000 Clonazepam release from core-shell type nanoparticles of poly(epsiloncaprolactone)/poly(ethylene glycol)/poly(epsiloncaprolactone) triblock copolymers Int J Pharm 200, 231– 242 80 Daniels AU, Chang MK, Andriano KP Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone J Appl Biomater 1990 Spring;1(1):57-78 81 Ann Chir Gynaecol 1999;88(4):313-7 Histological evaluation of poly(Llactide/epsilon-caprolactone) membrane implanted subcutaneously in rats.Ashammakhi et al 82 Schwope AD, Wise DL, Sell KW, Dressler DP, Skornick WA Evaluation of wound-covering materials J Biomed Mater Res 1977 Jul;11(4):489-502 83 Jurgens C et al In vitro and in vivo studies of a temporary absorbable dressing Unfallchirurg 1995 Apr;98(4):241-7 84 Zein I, Hutmacher D W, Tan K C, Teoh S H Fused deposition modelling of novel scaffold architectures for tissue engineering applications Biomaterials 2002; 23:1169-85 85 Humacher D W, Schantz T, Zein I, Ng K W, Teoh S H, Tan K C Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modelling J Biomed Mat Res 2000; 55: 203-16 51 86 Hutmacher DW, Fu X, Tan BK, Schantz JT Tissue engineering of elastic cartilage by using scaffold/cell constructs with different physical and chemical properties in Polymer Based systems in Tissue Engineering, Replacement and Regeneration, Reis, RL and Cohn, D (Eds) Kluwer Press Publishers Dordrecht (2002) 313-32 87 Hutmacher DW, Goh JCH, Teoh SH Biodegradable materials for tissue engineering application Ann Acad Med Singapore 2001;30:183–91 88 E.H Sprecht, A Neuman and H T Neher, U.S Pat 2,773,063 (1956): assigned to Rohm & Haas CIBA Ltd., Br Pat 746,747 (1956) 89 E.H Sprecht, A Neuman and H T Neher, Br Pat 772,196 (1956); assigned to Rohm & Haas 90 N.H Shearer JR and H W Coover JR U.S Pat 2,790,744-5 (1957); assigned to Eastman Kodak 91 H G Schild Poly(N-Isopropyl acrylamide): experiment, theory and with modification.Prog Polym Sci., Vol 17, 163-249, 1992 0079-6700/92 92 Allan S Hoffman, et al Founder’s Award, Sixth World Biomaterials Congress 2000, Kamuela, HI, May 15–20, 2000 Really smart bioconjugates of smart polymers and receptor proteins J Biomed Mater Res, 52, 577–586, 2000 93 Ding Z, Long CJ, Hayashi Y, Bulmus EV, Hoffman AS, Stayton PS Temperature control of biotin binding and release with a streptavidin-polyNIPAAm sitespecific conjugate Bioconjugate Chem 1999;10:395–400 94 Ding Z, Chen G, Hoffman AS Properties of polyNIPAAmtrypsin conjugates J Biomed Mater Res 1998;39:498–505 52 95 Chen G, Hoffman AS Preparation and properties of thermoreversible, phaseseparating enzyme-oligo(N- isopropyl acrylamide) conjugates Bioconjugate Chem 1993;4:509–514 96 Chen G, Hoffman AS Synthesis of carboxylated poly- (NIPAAm) oligomers and their application to form thermoreversible polymer-enzyme conjugates J Biomater Sci Polyme Ed 1994;5:371–382 97 Ding Z, Chen G, Hoffman AS Properties of polyNIPAAmtrypsin conjugates J Biomed Mater Res 1998;39:498–505 98 Morris JE, Hoffman AS, Fisher RR Affinity precipitation of proteins by polyligands Biotechnol Bioeng 1993;41:991–997 99 Hoffman AS Intelligent polymers in medicine and biotechnology Artif Organs 1995;19:458 –467 (Also in Macromol Symp 1995;98:645–664.) 100 A.L NGU'a~N and J H T LUONG, Enzyme Microb TechnoL 12, 663 (1990) 101 Morris JE, Hoffman AS, Fisher RR Affinity precipitation of proteins by polyligands Biotechnol Bioeng 1993;41:991–997 102 Chilkoti A, Chen G, Stayton PS, Hoffman AS Site-specific conjugation of a temperature-sensitive polymer to a geneticallyengineered protein Bioconjugate Chem 1994;5:504–507 103 Stayton, PS, Shimoboji T, Long C, Chilkoti A, Chen G, Harris JM, Hoffman AS Control of protein-ligand recognition using a stimuli-responsive polymer Nature 1995;378:472–474 53 104 Ding Z, Long CJ, Hayashi Y, Bulmus EV, Hoffman AS, Stayton PS Temperature control of biotin binding and release with a streptavidin-polyNIPAAm sitespecific conjugate Bioconjugate Chem 1999;10:395–400 105 Hayashi Y, Stayton PS, Hoffman AS, unpublished results, 1998 106 Stayton PS, Hoffman AS Interactive molecular conjugates US Patent, 5,998,588, 1999 107 Nanostructured designs of biomedical materials: applications of cell sheet engineering to functional regenerative tissues and organs Akihiko Kikuchi, Teruo Okano Journal of Controlled Release 101 (2005) 69–84 108 Kwon OH, Kikuchi A, Yamato M, Sakurai Y, Okano T Rapid cell sheet detachment from poly(N-isopropyl acrylamide)-grafted porous cell culture membranes J Biomed Mater Res 2000 Apr;50(1):82-9 109 Hyeong Kwon O, Kikuchi A, Yamato M, Okano T Accelerated cell sheet recovery by co-grafting of PEG with PIPAAm onto porous cell culture membranes Biomaterials 2003 Mar;24(7):1223-32 110 H.G Schild Poly(N-isopropyl acrylamide): experiment, theory, and application Prog Polym Sci., 1992, Vol 17, 163-249 54 [...]... PEAD /PCL single emulsion In vitro Atkins29 PCL/ poly(ethylene oxide)– poly(propylene oxide) solvent evaporation In vitro Huatan et al.30 PCL solvent evaporation In vitro Lin and Yu31; Lin et al.32 PCL In vitro Lin and Huang33 In vitro Ethyl salicylate PCL emulsion-solvent evaporation solvent evaporation Nerve growth factor PCL; PCL/ PLGA solvent evaporation In vitro Indomethacin PCL melt-dispersion In vitro. .. PCL/ PLA; PCL/ cellulose acetate butyrate solvent evaporation In vitro Chang et al.21,22,23 Cyclosporine PCL solvent evaporation In vitro Aberturas et al.24 Cisplatin PCL/ PLA solvent evaporation In vitro Chandy et al.25 E- and P-selectin Ribozymes PCL PCL In vitro In vitro Dickerson et al.26 Jackson et al27 Bovine serum albumin PCL single emulsion Injection of polymeric paste solvent evaporation In vitro. .. drugs PCL o/w or w/o/w emulsion In vitro Perez et al.16 Taxol PCL In vitro Dordunoo et al.17 Gentamicin PCL In vitro Sondhof et al.18 Ketoprofen PCL; PCL/ hydroxypropylmethylcellulose phthalate PCL; PCL/ PLA solvent evaporation double emulsion spray-drying in vitro Giunchedi et al.19 Entrapping; PEG coated In vitro Das et al.20 Antigen Colchicine Chlorpromazine; chlorpromazine–HCL and progesterone PCL/ PLA;... Nitrofurantoin Insulin PCL PCL solvent evaporation solvent evaporation In vitro In vitro Gadzinowski et al.34 Cao and Shoichet35 Bodmeier and Chen,36 Dubernet et al.37 Shenoy et al.38 3,4-diaminopyridine PCL In vitro Gibaud et al.39 Heparin PCL/ poly(d,l-lactic-co-glycolic acid)/Eudragit RS and RL by different methods for double emulsification; evaporation process In vitro Jiao et al.40 Injectable bone... caprolactone PCL/ ethylene oxide ε-caprolactone/l-lactide PCL/ poly(ε-block d,llactide) PCL/ poly(ether ester amide) PCL/ lactic acid PCL/ 2,2-bis(2oxazoline) Techniques Vitro/ Vivo Researchers In vitro In vitro Pitt et al.42; Buntner et al.43,44 Martini et al.45 Guerra et al.46 both Limin et al.47 In vitro Barbato et al.48 In vitro Cha and Pitt49 In vitro Tarvainen et al.50 Solvent evaporation hot melt solvent... glycol) /PCL Taxol Methoxy poly(ethylene glycol) /PCL Bovine serum poly(ethylene albumin Oxide /PCL Clonazepam poly(ethylene glycol) /PCL 1.1.3.2 Techniques Vitro/ Vivo Researchers dialysis In vitro Kim et al.75,76 dialysis In vitro Kim and Lee77 w/o/w double emulsion dialysis In vitro Lu et al.78 In vitro Ryu et al.79 Internal fixation Early in the 1980’s, PCL had been studied as the replacement of stainless... 1.4 5 Table 1.3 Fact sheet of nanosphere based PCL or PCL blended Drug Components delivered Indomethacin PCL Techniques three submicron systems Vitro/ Vivo Researchers both Calvo et al.51,52 Cartelol PCL In vivo Flurbiprofen PCL Solvent diplacement In vitro Primidone PCL In vitro Aceclofenac PCL both Alonso et al.57 Diclofenac PCL interfacial deposition Interfacial precipitation Spray dry MarchalHeussler... especially helpful in harvesting cardiac cells beating at the same rate and endothelial cell sheets for repair of vessels 19 Sandwich cell culture layers can be formed when a PNIPAAm layer is inserted in between the tissue culture grade polystyrene (TCP) and another fibronectin (FN) cell adhesive layer (Fig 1.15) Figure 1.14 Schematic diagrams for possible interactions of materials surfaces with cells The “deadhesion”... been studied, by blending PCL with other polymers, or using PCL alone, as listed in Table 1.1 3 Tabble 1.1 Fact sheet of microsphere based PCL or PCL blended Drug Delivered Component(s) Techniques Vitro/ Vivo Researcher(s) PCL double emulsion both Jameela et al.12 PCL melt encapsulation both Jameela et al.13 PCL in vitro Youan et al.14 PLGA w/o/w solvent evaporation Spray-drying in vitro Murillo et al.15... carried out by Schwope et al, both in vitro and in vivo, with three types of materials formed by PCL: 1) a freeze-dried collagen /PCL film laminate, 2) a freeze-dried PCL foam /PCL film laminate, and 3) a heat-dried collagen /PCL film laminate Results showed that one graft was extremely adherent to wound (burned rat model) and most successful in promoting tissue bed formation.82 In the year of 1995, Jurgens’ ... PCL/ PLGA solvent evaporation In vitro Indomethacin PCL melt-dispersion In vitro Nitrofurantoin Insulin PCL PCL solvent evaporation solvent evaporation In vitro In vitro Gadzinowski et al.34 Cao and... Tamoxifen PCL Metipranolol PCL Isradipine PCL Bovine serum albumin PCL In vitro In vitro In vivo interfacial deposition nanoprecipitation both double emulsion pressure homogenization In vitro both... solvent evaporation In vitro Chandy et al.25 E- and P-selectin Ribozymes PCL PCL In vitro In vitro Dickerson et al.26 Jackson et al27 Bovine serum albumin PCL single emulsion Injection of polymeric