References References Acosta-Martinez, H.E. and Gourvenec, S. (2006). One-dimensional consolidation tests on kaolin clay, Research Report GEO: 06385, University of Western Australia, Geomechanics Group, Perth. Bennett & Associates, L.L.C. & Offshore Technology Development Pte. Ltd. (2005). Jack up units: A technical primer for the offshore industry professional. (Website: http://www.bbengr.com/jack_up_primer.pdf) Berg, A.H.H.J. (2004). Harmonisation of distributed geographic datasets: A model driven approach for geotechnical and footprint data. Master of Science thesis, Delft University of Technology. Bransby, M.F. and Randolph, M.F. (1999). The effect of skirted foundation shape on response to combined V-M-H loadings. Int. J. of Offshore and Polar Eng., 9(3), 214-218. Butterfield, R., Houlsby, G. T. and Gottardi, G. (1997). Standardized sign conventions and notation for generally loaded foundations. Géotechnique 47, No. 5, 1051-1054. Cassidy, M.J., Byrne, B.W. and Randolph, M.F. (2004). A comparison of the combined load behaviour of spudcan and caisson foundations on soft normally consolidated clay. Géotechnique 54, No. 2, 91 – 106. Cassidy, M.J., Quah, C.K. and Foo, K.S. (2009). Experimental investigation of the reinstallation of spudcan footings close to existing footprints. Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 135, No. 4, April 2009, pp. 474-486. Chung, S.F., Randolph, M.F. and Schneider, J.A. (2006). Effect of penetration rate on penetrometer resistance in clay. Journal of Geotechnical and Geoenvironmental Engineering 2006: 1188-1196. Dean, E.T.R., Hsu, Y. S., James, R.G., Schofield, A.N., Murff, J.D. and Wong, P.C. (1995). Centrifuge modelling of 3-leg jack-ups with non-skirted spuds on partially drained sand. Proc. 27th Offshore Technology Conf., Houston, Texas 319 – 332. 275 References Dean, E.T.R., James, R.G., Schofield, A.N., Tan, F. S. C. and Tsukamoto, Y. (1993). The bearing capacity of conical footings on sand in relation to the behaviour of spudcan footings of jackups. In Predictive soil mechanics, Proc. Wroth Mem. Sym., pp. 230-253. London: Thomas Telford. Dean, E.T.R., and Serra, H. (2004). Concepts for mitigation of spudcanfootprint interaction in normally consolidated clay. Proc. 14th Int. Offshore and Polar Engineering Conf. (ISOPE), Toulon, France. Finnie, I.W.S. (1993). Performance of shallow foundations in calcareous soils. PhD thesis, University of Western Australia. Finnie, I.M.S. and Randolph, M.F. (1994). Punch-through and liquefaction induced failure of shallow foundations on calcareous sediments. Proceedings of International Conference on Behaviour of Offshore Structures. Boston, pp. 217 -230. Foo, K.S., Quah, M.C.K., Wildberger, P. and Vazquez, J.H. (2003). Spudcan footprint interaction and rack phase difference. Proc. 9th Int. Conf. Jackup Platform Design, Construction and Operation, City University, London, UK. Gan, C.T., Cassidy, M.J., Gaudin, C., Leung, C.F. and Chow, Y.K. (2008a). Drum centrifuge model tests on spudcan footprint characteristics in normally consolidated and over-consolidated kaolin clay. Centre for Offshore Foundation System, University of Western Australia. Research report No. 08469. Gan, C.T., Leung, C.F. and Chow, Y.K. (2007). A study on spudcan footprint. Proc. of 16th Southeast Asia Geotechnical Conference, Kuala Lumpur, 735-740. Gan, C.T., Leung, C.F. and Chow, Y.K. (2008b). A study on spudcan footprint interaction. Proc. of 2nd BGA International Conference on Foundations, Dundee, Scotland, 24-27 June 2008, pp. 861 – 872. Gemenhardt, J.P. and Focht, J.A. (1970). Theoretical and observed performance of mobile rig footings on clay. Proceeding of 2nd Annual Offshore Technology Conference, Houston, Texas, US. April 22-24, 1970. OTC 1201. pp. 549 – 558. Global Maritime-Fugro Alliance. (2002). Guideline Document for the assessment and mitigation of jack-up spudcan-footprint interaction. 276 References Proposal for an industry sponsored project managed by the Global Maritime-Fugro JIP Alliance. Global Maritime. (2003). Impact of changes to T&R 5-5A on jack-up system reliability levels. Research Report 037. Health and Safety Executives 2003. Goh, T.L. (2003). Stabilisation of an excavation by an embedded improved soil layer. PhD thesis, National University of Singapore. Grammatikopoulou, A., Jardine, R.J., Kovacevic, N, Potts, D.M., Hoyle, M.J.R. and Hampson, K.M. (2007). Potential solutions to the problem of the eccentric installation of jack-up structures into old footprint craters. Proceedings of the 6th International Offshore Site Investigation and Geotechnics Conference. 11-13 September 2007, London, UK. Hossain, M.S., Hu, Y., Randolph, M.F. and White, D.J. (2005). Limiting cavity depth for spudcan foundations penetrating clay. Géotechnique, 55(9), 679-690. Hossain, M.S., Myhreyar, Z., Hu, Y. and Randolph, M.F. (2004). Deep penetration of spudcan foundation into NC clay. Proc. of 23rd International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Vancouver, Canada, OMAE 2004. 51154. Houlsby, G.T. and Martin, C.M. (2003). Undrained bearing capacity factors for conical footings on clay. Géotechnique 53, No.5, pp. 513-520. Hu, Y. and Randolph, M. F. (1998). H-adaptive FE analysis of elasto-plastic non-homogeneous soil with large deformation. International Journal of Computer Geomechanics, 23(1), pp. 61-84. Hu, Y., Randolph, M.F. and Watson, P.G. (1999). Bearing response of skirted foundation on nonhomogeneous soil. Journal of Geotechnical and Geoenvironmental Engineering (ASCE). Vol. 125(11). pp. 924-935. Jamiolkowski, M.B., Ladd, C.C., Germaine, J.T. and Lancellotta, R. (1985). New developments in field and laboratory testing of soils. Proceedings of 11th International Conference on Soil Mechanics and Foundation Engineering, San Franscisco, 12-16 Aug. 1985. Vol. 1. pp. 57-153. Jardine, R.J. (2009). Review of technical issues relating to foundations and geotechnics for offshore installations in the UKCS. Research report 676 for Health and Safety Executive, UK. 277 References Jardine, R.J., Kovacevic, N., Hoyle, M.J.R., Sidhu, H.K. and Letty, A. (2001). A study of eccentric jack-up penetration into infilled footprint craters. Proc. 8th International Conference the Jack-up Platform, eds: C.D’Mello and L. Boswell, City University, London. Jardine, R.J, Kovacevic, N., Hoyle, M. J. R., Sidhu, H.K. and Letty, A. (2002). Assesing the effects on jack-up structures of eccentric installation over infilled craters. In Society for Underwater Technology (SUT), Proc. Int. Conf. Offshore Site Investigation and Geotechnics – ‘Diversity and Sustainability’. London, pp. 307 – 324. Koutsoftas, D.C. and Ladd, C.C. (1985). Design strengths for an offshore clay. Journal of Geotechnical Engineering, ASCE, 111(3): 337-355. Ladd, C. C. and R. Foott. (1974). New design procedure for stability of soft clays. American Society of Civil Engineers, Journal of the Geotechnical Engineering Division 100(GT7): 763-786. Le Tirant, P. (1979). Seabed reconnaissance and offshore soil mechanics for the installation of petroleum structures. Paris: Editions Technips. Lee, F.H. (1992). The University of Singapore Geotechnical Centrifuge User Manual. Research Report No. CE001. July 1992. Lee, F.H., Tan, T.S., Yong, K.Y., Karunaratne, G.P. and Lee, S.L. (1991). Development of geotechnical centrifuge facility at the National University of Singapore. Proc. Int. Conf. Centrifuge 1991, pp. 11-17. Lee, K.K. (2009). Investigation of potential spudcan punch-through failure on sand overlying clay soils. PhD thesis, University of Western Australia. Leung, C.F., Gan, C.T. and Chow, Y.K. (2007). Shear strength changes within jack-up spudcan footprint. 7th International Offshore and Polar Engineering Conference (ISOPE), Lisbon, Portugal, pp. 1504 – 1509. Leung, C.F., Lee, F.H. and Tan, T.S. (1991). Principles and applications of geotechnical centrifuge model testing. Journal of the Institution of Engineering, Singapore, Vol. 31, No. 4, pp. 39-44. Low, H.E., Randolph, M.F., DeJong, J.T. and Yafrate, N.J. (2008). Variable rate fullflow penetration tests in intact and remoulded soil. Proceedings of 3rd International Conference on Site Characterization (ISC'3) Geotechnical and Geophysical Site Characterization. Edited by A.-B. 278 References Huang and P.W. Mayne. Taipei, Taiwan. 1-4 April 2008. Taylor & Francis. pp. 1087-1092. Lunne, T., Randolph, M.F., Chung, S.F., Andersen, K.H. and Sjursen, M. (2005). Comparison of cone and T-bar factors in two onshore and one offshore clay sediments. Frontiers in Offshore Geotechnics: ISFOG 2005: 981-989. Martin, C.M. (1994). Physical and numerical modeling of offshore foundations under combined loads. DPhil thesis, University of Oxford. McClelland, B., A.G. Young and B.D. Remmes. (1981). Avoiding jack-up rig foundation failure. Proc. Int. Symp. Geotechnical Aspects of Coastal and Offshore Structures, Bangkok. McClelland, B., A.G. Young and B.D. Remmes. (1982). Avoiding jack-up rig foundation failure. Geotechnical Engineering 13(2), 151-188. McNamee, J. and R.E. Gibson. (1960a). Displacement functions and linear transforms applied to diffusion through porous elastic media. Quarterly Journal of Mechanics and Applied Mathematics, 13. pp. 98-111. McNamee, J. and R.E. Gibson. (1960b). Plane strain and axially symmetric problems of the consolidation of a semi-infinite clay stratum. Quarterly Journal of Mechanics and Applied Mathematics, 13. pp. 210-227. MSL. (2004). Guidelines for jack-up rigs with particular reference to foundation integrity. Research Report 289. Health and Safety Executive 2004. Murff, J.D. (1996) The geotechnical centrifuge in offshore engineering. In Proceedings International Offshore Technology Conference, Houston, – May 1996, pp 675 – 689. Murff, J.D., Himilton, J.M., Dean, E.T.R., James, R.G., Kusakabe, O. & Schofield, A.N. (1991). Centrifuge testing of foundation behaviour using full jack-up rig models. Proc. 32nd Offshore Technology Conference, Houston, Texas, OTC 6516. Newson, T.A., Watson, P.G. and Bransby, M.F. (1999). Undrained shear strength profiling using a spherical penetrometer. Research report: G469. Geomechanics Group, The University of Western Australia. 279 References Osborne, J.J. (2005). Are we good or are we lucky? Managing the mudline risk. OGP/CORE Workshop – the Jackup Drilling Options & Ingredient for Success, 2005.National University of Singapore. Osborne, J.J., Pelley, D., Nelson, C. and Hunt, R. (2006). Unpredicted jack-up foundation performance. 1st Jack-up Asia Conference and Exhibition, Singapore. 7-8 December 2006. Osborne, J.J., Teh, K.L., Leung, C.F., Cassidy, M.J., Houlsby, G.T., Chan, N., Devoy, D., Handidjaja, P. and Foo, K.S. (2008). An introduction to the InSafe JIP. Proceeding of the 2nd Jack-up Asia Conference. Singapore. Poulos, H.G. (1988). Marine geotechnics. London: Unwin Hyman. Purnawa, O. A. (2007). Centrifuge model study on the spudcan extraction in soft clay. Phd Thesis, National University of Singapore. Purwana, O.A., Leung, C.F., Chow, Y.K. and Foo, K.S. (2005). Influence of base suction on extraction of jack-up spudcans. Géotechnique 55, No. 10, 741-753. Randolph, M.F., Cassidy, M.J., Gourvenec, S., and Erbrich, C.T. (2005). Challenges of offshore geotechnical engineering (Keynote). Proc. 16th Int. Symp. Soil Mechanics And Geotechnical Engineering (ISSMGE), Osaka, Japan, Balkema. Randolph, M.F., Hefer, P.A., Geise, J., and Watson, P.G. (1998). Improved seabed strength profiling using T-bar penetrometer. Offshore Site Investigation and Foundation Behaviour ‘ New Frontier’, London, UK, 221-235. Randolph, M.F. and Hope, S. (2004). Effect of cone velocity on cone resistance and excess pore pressures. Proc. of International Symposium on Engineering Practice and Performance of Soft Deposits. Osaka, Japan, pp. 147-152. Randolph, M.F. and Houlsby, G.T. (1984). The limiting pressure on a circular pile loaded laterally in cohesive soil. Géotechnique 34, No. 4, 613-623. Randolph, M.F. and House, A.R. (2001). The complementary roles of physical and computational modeling. International Journal of Physical Modelling in Geotechnics (2001): 01-08. 280 References Randolph, M.F., Martin, C.M. and Hu, Y. (2000). Limiting resistance of a spherical penetrometer in cohesive material. Géotechnique 50, No. 5, 573-582. Reardon, M.J. (1986). Review of the geotechnical aspects of jack-up unit operations. Ground Engineering. 19(7): 21-26. Rowe, R.K. and Davis, E.H. (1982). The behaviour of anchor plates in clay, Geotechnique 32, No. 1, pp. 9-23. Schiffman, R.L., A.T.F. Chen and J.C. Jordan.(1969). An analysis of consolidation theories, Journal of the Soil Mechanics and Foundations Division: Proceedings of the American Society of Civil Engineers, 95(SM1), pp. 285-312. Schofield, A. N. (1998). Geotechnical centrifuge development can correct a soil mechanics error. Keynote lecture, Tokyo Conference of TC2, Centrifuge 98. 23 September 1998. Siciliano, R.J., Hamilton, J.M. and Murff, J.D. and Phillips, R. (1990). Effect of jackup spudcans on piles, Offshore Technology Conference. OTC 6467, 381-390. Stewart, D.P. (1992). Lateral loading of piled bridge abutments due to embankment construction. PhD thesis, University of Western Australia, Perth. Stewart, D.P. (2005). Influence of jack-up operation adjacent to a piled structure. Frontiers in Offshore Geotechnics: ISFOG 2005. pp. 516-523. Stewart, D.P., Boyle, R.S. and Randolph, M.F. (1998). Experience with a new drum centrifuge. Proc. Int. Conf. Centrifuge’98, Tokyo, Japan, 1, pp 3540. Stewart, D.P. and Finnie, I.M.S. (2001). Spudcan-footprint interaction during jack-up workovers. International Society of Offshore and Polar Engineers (ISOPE), Cupertino, California. Vol. 1. pp. 61-65. Stewart, D.P., and Randolph, M.F. (1991). A new site investigation tool for the centrifuge. Proc. Int. Conf. on Centrifuge Modelling – Centrifuge 91, Boulder, Colorado, 531-538. Stewart, D.P., and Randolph, M.F. (1994). T-bar penetrometer testing in soft clay. Journal of Geotechnical Engineering, Vol. 120, No. 12, 2230-2235. 281 References SNAME (2002a). Guidelines for Site Specific Assessment of Mobile Jack-up Units, Society of Naval Architects and Marine Engineers, Technical & Research Bullentin 5-5A, New Jersey. SNAME (2002b). Commentaries to Recommended Practice for Site Specific Assessment of Mobile Jack-up Units, Society of Naval Architects and Marine Engineers, New Jersey. Sumrow, M. (2002). Industry funded project investigates jack-up rig spudcan, footprint interactions. Oil & Gas Journal, 2002. pp. 56-57. Svano, G. and Tjelta T. I. (1996). "Skirted spud-cans - Extending operational depth and improving performance." Marine Structures 9(1 Spec. Iss.): 129-148. Swee, S. (2009).The effect of skirted height on punch-through mitigation. Bachelor thesis, National University of Singapore. Taylor, R.N. (1995). Centrifuge in modeling: Principles and scale effects. Geotechnical Centrifuge Technology, Blackie Academic and Professional. Taylor, R.N., R.J. Grant, S. Robson and J. Kuwano. (1998). An image analysis system for determining plane and 3-D displacements in soil models. Proc. Centrifuge’ 98. Balkema, Rotterdam, pp. 73-78. Teh, K.L. (2007). Punch-through of spudcan foundation in sand overlying clay. PhD thesis, National University of Singapore. Teh, K.L., Byrne, B.W. and Houlsby, G.T. (2006). Effects of seabed irregularities on loads developed in legs of jack-up units. Jack Up Asia Conference & Exhibition 2006, Singapore. Teh, K.L, Gan, C.T., Hu, E.H.J., Leung, C.F. and Chow, Y.K. (2008). A comparison of penetration behaviour of spudcan and skirted footing in sand overlying clay. Proc. of 2nd Jack-up Asia Conference, Singapore, 17-18 Nov. 2008. Tho, K.K., Leung, C.F., Chow, Y.K. and Swaddiwudhipong, S. (2009). Application of Eulerian finite element technique for analysis of spudcan and pipeline penetration into the seabed. Proc. 12th International Conference the Jack-up Platform, City University, London. Tsukamoto, Y. (1994). Drum centrifuge tests of three-leg jack-ups on sand. PhD. Thesis, University of Cambridge, United Kingdom. 282 References Watson, P.G. (1999). Performance of skirted foundations for offshore structures. PhD thesis, The University of Western Australia. Watson, P.G., Newson, T.A. and Randolph, M.F. (1998). Strength profiling in soft offshore soils. Proc. 1st Int. conf. on site characterization – ISC’98, pp. 1389-1394. Atlanta: Balkema. White, D.J. and W.A. Take. (2002). GeoPIV: Particle Image Velocimetry (PIV) software for use in Geotechnical testing. D-Soils-TR322. Cambridge University Engineering Department Technical Report. White, D.J., W.A. Take and M.D. Bolton. (2003). Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry. Géotechnique, Vol. 30(1). Pp. 49-65. Wroth, C.P. (1984). The interpretation of in situ soil tests. Géotechnique, 34(4): 449-489. Xie, Y. (2009). Centrifuge model study on spudcan-pile interaction. Phd Thesis, National University of Singapore. Zhou, X.X. (2006). Numerical modelling of extraction of spudcans. Phd Thesis, National University of Singapore. 283 . Géotechnique, 34(4): 4 49- 4 89. Xie, Y. (20 09) . Centrifuge model study on spudcan-pile interaction. Phd Thesis, National University of Singapore. Zhou, X.X. (2006). Numerical modelling of extraction of spudcans Technology Conference, Houston, 6 – 9 May 199 6, pp 675 – 6 89. Murff, J.D., Himilton, J.M., Dean, E.T.R., James, R.G., Kusakabe, O. & Schofield, A.N. ( 199 1). Centrifuge testing of foundation behaviour. M.F. and Watson, P.G. ( 199 9). Bearing response of skirted foundation on nonhomogeneous soil. Journal of Geotechnical and Geoenvironmental Engineering (ASCE). Vol. 125(11). pp. 92 4 -93 5. Jamiolkowski,