NC2000 system operation manual vol2

Manual of NC2000 monitoring and controlling system volume operations NARI Group Corp Nanjing Automation Research Institute June.2006 Copyright Announcement The copyright of 《 Manual of NC2000 monitoring and controlling system》belongs to Nanjing NARI automatic control corporation All rights have been reserved, and any copying or diffusing is forbidden without permition of Nanjing NARI automatic control corporation 、 company is the registered trade mark of Nanjing NARI group Preface Basing on NARI Access monitoring and controlling system and much applying experience in many hydro-power plants around the world, Nanjing NARI automatic control corporation developed NC2000,which is new generation of monitoring and controlling software for electric system The software employs CLIENT/SERVER mode and supports various hardwares,operating systems,relationalized database.Users can easily master NC2000 for its facing to opjects designing and developing This manual helps users master the installation,using and maintenance of NC2000.The first volume introduces installation of the software, the second volume introduces operations, the third volume introduces configuration ,the last volume introduces maintenance Through the manual, users may expertly master NC2000 and contribute to the automatization of electric system guide target This volume ,as second volume of NC2000, major in operations object The whole manual faces to circulators in electric plants, and is typeset by Microsoft Word Thirteen chapters constitute this volume Logging on system, introduce how to enter NC2000 Picture display system, introduce how to employ picture display function of NC2000 Briefing ,introduce how to use briefing of NC2000 Schedule, introduce how to use schedule of NC2000 Report query, introduce how to query report Curve query, introduce how to query curve Faulty alarm with lampalarm with lamplight, introduce how to use faulty alarm with lampalarm with lamplight Index, introduce how to use index function Trace, introduce how to use accident tracing function 10 Protecting config, introduce to how to config protecting function 11 Time record, introduce how to employ time record function 12 AGVC query, introduce how to perform AGC(Automatic Generate Control)query and AVC (Automatic Voltage Control)query 13 Web query, introduce how to perform web query function [announcement] Headlines are black font If followed by “terms”, the headlines are achieved under these terms [attention] indicating items for attention [warning]indicating items may cause serious error catalogue CHAPTER LOGGING ON .2 1.1 NC2000 LOGGING ON 1.1.1 layout of logging on 1.1.2 process of logging on 1.1.3 log off 1.2.1 mission column 1.2.2 start menu 1.3 NC2000 RESET OF MAN MACHINE INTERFACE CHAPTER PICTURE DISPLAY .8 2.1 PICTURE DISPLAY WINDOW 2.1.1 layout 2.1.2 menu bar and toolbar 2.2 MAKEUP OF PICTURES 11 2.2.1 introducing of general pictures of monitoring and controlling system in hydro-power plants 11 2.2.2 picture transfering 18 2.2.3 picture display 19 2.3 PICTURE OPERATION 19 2.3.1 dynamic query by icon 19 2.3.2 zoom in 22 2.3.3 input data 22 2.3.4 set state 24 2.3.5 operation of control 25 2.3.6 curve of load 27 2.3.7 delamination display .28 2.3.8 trade curve 29 CHAPTER BRIEFING 31 3.1 LAYOUT AND SETTING 31 3.1.1 layout .31 3.1.2 setting of briefing 31 3.2 INFORMATION DISPLAY 32 3.2.1 makeup of information 32 3.2.2 classified display .32 3.2.3 horse race lamb .32 3.2.4 optional 32 CHAPTER SCHEDULE 34 4.1 LAYOUT OF SCHEDULE 34 4.1.1 layout of window .34 4.1.2 menu 35 4.2 INFORMATION DISPLAY 35 4.2.1 classification of schedule data 35 4.2.2 default query 35 4.3 ADVANCED QUERY 36 4.3.1 query by date 36 4.3.2 query by string 39 4.3.3 advanced items of query setting 40 CHAPTER REPORT QUERY .43 5.1 LAYOUT OF REPORT QUERY 43 5.1.1 layout of report query window 43 5.1.2 menu bar 43 5.2 REPORT QUERY 45 5.2.1 select report .45 5.2.2 select query date 45 5.2.3 immediately query 46 5.3 EDIT AND PRINT OF REPORT 46 5.3.1 edit of report 46 5.3.2 print of report 47 5.3.3 select query node .47 5.3.4 save function 47 CHAPTER CURVE QUERY 50 6.1 LAYOUT OF CURVE QUERY 50 6.1.1 layout of interface/window 50 6.1.2 menu bar 50 6.1.3 setting area 51 6.1.4 curve displaying area 51 6.1.5 curve setting area 52 6.2 CURVE QUERY 52 6.2.1 select query objects 52 6.2.2 set query period .54 6.2.3 value query 57 6.3 ADVANCED FUNCTION 58 6.3.1 zoom in and resume 58 6.3.2hide curve 59 6.3.3 set range for displaying 60 CHAPTER ALARM WITH LAMPLIGHT 62 7.1 LAYOUT OF FAULT ALARM WITH LAMPLIGHT 62 7.1.1 layout of window .62 7.1.2 tool bar 63 7.2 DISPLAY AND RESUME OF ALARMS WITH LAMPLIGHT 63 7.2.1 start-up of alarm with lamplight .63 7.2.2 display of alarm with lamplights .64 7.2.3 query of lamplight 65 7.2.4 resume of lamplight 66 7.2.5 alarm with lamplights of a multilevel hydro-power plant .67 CHAPTER INDEX 70 8.1 LAYOUT OF INDEX 70 8.1.1 layout of the window .70 8.1.2 menu bar 70 8.1.3 project tree 71 8.1.4 display area for point information 71 8.2 INFORMATION QUERY 73 8.2.1 select point for query .73 8.2.2 basal attributes of points 73 8.3 ADVANCED FUNCTION 75 8.3.1 edit and setting of attributes 75 8.3.2 list of error points 75 CHAPTER ACCIDENT RETRIEVAL 77 9.1 THE WINDOW LAYOUT OF THE ACCIDENT RETRIEVAL TABLE 77 9.1.1 The window layout 77 9.1.2 the region for display the accident retrieval 77 9.2 ACCIDENT RETRIEVAL QUERY 77 9.2.1 The start-up of accident retrieval 77 9.2.2 Query the accident retrieval table 78 9.2.3 Print the accident retrieval table 78 CHAPTER 10 PROTECTION FIXED VALUE .79 10.1 THE LAYOUT OF PROTECTION FIXED VALUE WINDOWS 10.2 DISPLAY INFORMATION 79 79 CHAPTER 11 TIME RECORD 81 11.1 TIME RECORD WINDOW 81 11.1.1 Window layout .81 11.1.2 Toolbar 81 11.2 QUERY METHODS 82 11.2.1 Record Name Query 82 11.2.2 Record Time Query .82 11.2.3 Query Record data 83 CHAPTER 12 AGVC INQUIRIES 84 12.1 AGVC QUERY WINDOW 84 12.1.1 Window layout .84 12.1.2 Toolbar 84 12.2 PARAMETER QUERY 85 12.2.1 Plant parameters 85 12.2.2 Unit parameters 85 CHAPTER 13 WEB BROWSER 87 13.1 NC2000 WEB BROWSER SYSTEM（C/S VERSION）CLIENT COMPUTER START 87 13.1.1 WEB client computer start 87 13.1.2WEB client window closed .88 13.2 SERVICE CONNECTION 88 13.2.1 WEB Service Connection 88 13.3 USER LOGIN 90 13.4 DOWNLOAD DATA 91 13.4.1 DOWNLOAD SCREEN 91 13.4.3 Update client program 92 13.5 DATA QUERY 93 13.5.1 View images 93 13.5.2 view the list 93 13.5.3 View The Report 94 13.5.4 View Curve 95 13.6 NC2000 WEB BROWSER SYSTEM (B / S VER 1.0 VERSION) 95 13.6.1 Login Interface 95 13.6.2 Display Properties 96 summarize NC2000 system is running on windows, Linux, Unix and other operating systems and it is the automated monitoring system of hydropower plant application which is developed by NARI, Nanjing Automation Co., Ltd 。 The manual describes the main functions and basic usage of system software NC2000 The main purpose is to enable readers to master the basic usage of NC2000 system The main features of NC2000 monitoring system include: display and control power plant equipment, display real-time information of various types which is required for by the production and running of the plant, generate real-time report of the production and schedule, see about all kinds of real-time information and the history The manual describes the function of NC2000 system in 13 chapters according to the figure layout design of NC2000: system registry, screen display, briefing window, schedule, report query, curve query, the incident optical character, the point index, recall the accident, protect value, time records, AGVC query and the Web browser of NC2000 system In the following chapter, we will introduce to you how to use these functions one by one.。 Chapter logging on 1.1 NC2000 logging on 1.1.1 layout of logging on Clicking the start button ,you will get startmenu, then move the mouse to “log on” Don’t click until the colour of “log on” becomes deeper Another method to log on is to click shortcut” ”,as picture1-1 shows Figure1-1 Upside of “log on” window, which includes two blanks for username input and password input,a”information”button ,a “confirm”button, and “deny”button,is the area for input of usernames and passwords Downside of “log on”window is used to display version of the system [ attention]please select a username and input the passwords paying attention to font of characters [attention]please log out when you leaves, avoiding errors 1.1.2 process of logging on ． you can select a username in drawout menus Firstly,you can click the drawout menu and then select a username 2． input password 1) You can input password in the “password”column.After entering a password, you can click”confirm”to confirm your operation or click”deny”to give up your operation 3． lick “confirm” If the password doesn’t match the username, a window will appear to indicate”error password”, as picture 1-2 shows Figure1-2 Click ”confirm”button in the window, you can slect a username or input a password again ． If the password matches the username,username will be showed in mission column , as picture 1-3 shows At the same time, information of logging on user will appear in briefing, as picture 1-3 shows Figure1-3 Figure1-4 5． You can click the“deny”button in “log on” window to close it 1.1.3 log off If someone has logged on, you can click “start menu” to log off Firstly,you Figure 12-4 Click on the button in the above region or ， it can show the home parameters ； Click on the button in the above region or ，it can show the parameters of the end。 FAQ interlocution： FAQ Q & A Any doubt about the contents of this chapter, please write the questions behind FAQ, according to the sequence of 1,2,3, , and send the problem back to us, we will respond as soon as possible, thank you! (Nanjing NARI Autocontrol Co., Ltd / Engineering Center / Technical Support) 86 Chapter 13 Web browser 13.1 NC2000 Web browser system（ C/S version） client computer start 13.1.1 WEB client computer start Click“Start”―“programme”－“NC2000”－“NC2000 Web client computer”， Figure 14-1。 Figure 13-1 Start WEBRemote start window，Interface in Figure 13-2。 87 Figure 13-2 13.1.2WEB client window closed click "turn off windows client" on the “NARI—Remote start window”，Turn off "remote start window"，and turn off the remote connected service。 13.2 Service Connection 13.2.1 WEB Service Connection In the "NARI-remote start window" ， enter the remote server address ， For example 192.9.200.107。 Click on the "connect server" button ， If the WEB client and the WEB server connected ， the Client "NARI-remote start window" will display "network connected"，Figure 13-3； Figure 13-3 WEB server-side display window，Figure 13-4 88 Figure 13-4 13.2.2 Close the WEB Service In the "NARI-remote start window" ， Click on "Close connection" button ， the WEB Service will be Closed。 The WEB client shows status，Figure 13-5: Figure 13-5 The WEB server display status，Figure 13-6: 89 Figure 13-6 13.3 User Login 1.When the WEB Service connected ， at the Client’s "remote start window" ， enter the user name，such as abc； Enter the password，such as abc； Click the "Sign In" button，Figure 13-7； Figure 13-7 90 When users log in，the Client will show "NARI-remote start window"，Figure 13-8。 Figure 13-8 13.4 Download Data 13.4.1 Download screen In the "Remote restart windows" ， Click on the button "Download the latest screen"，download the latest screen from the WEB server ， the process of download on the figure 13-9。 Figure 13-9 13.4.2 Download The Report 91 In the "Remote restart windows" ， Click the "Download the latest Report" button ， download the latest Report from the WEB server ， download process in Figure 13-10。 Figure 13-10 13.4.3 Update client program In the “Remote start window” ， Click "Update Client program " button ， download the client program from the WEB server ， download process in Figure 13- 11。 92 Figure 13-11 13.5 Data Query 13.5.1 View images In the “Remote start window”，click "Start browser screen"，the system pop-up a "graphics display" window，Figure 13-12。 Figure 13-12 Call the other screen through the main screen。 13.5.2 view the list Click the "historical data" menu in the "NARI (graphic displays)" window ， Choose the menu of "Record Query" ， the system pop-up a "NARI-List" 93 window，the history List can be queried，Figure 13-13。 Figure 13-13 13.5.3 View The Report Click the "historical data" menu in the "NARI (graphic displays)" window ， choose the menu of "Report Query" ， the system pop-up "NARI-Report System" window，the report historical data can be queried，Figure 13-14。 Figure 13-14 94 13.5.4 View Curve Click the "historical data" menu in the "NARI (graphic displays)" window ， Choose the menu of "Query curve" ， the system pop-up "NARI-history curve" window ， the history of curve can be queried，Figure 13-15。 Figure 13-15 13.6 NC2000 Web browser system (B / S ver 1.0 version) 13.6.1 Login Interface Type the URL at the IE browser of the client ： http:// serverIP:8080/webnc ， enter into the NC2000 B / S version of the following Web browser interface sign ： 95 Figure 13-16 Click Login，enter the username and the password，then enter into the system。 13.6.2 Display Properties Double-click the " project" on the left ， it will display “Graph” 、 “Report”and “curve”separately "Graph" mainly the real-time Screen data display of the computer monitoring and control system ， Click on the "Graph" may appear of the screen display 。 As follows： 96 Figure 13-17 "Report"shows the report of the computer monitoring and control system ，Click on the "Report"，you will see the item of “Report”。As follows： Figure 13-18 "Curve" shows the History curve of the computer monitoring and control system，Click on the "curve"，you will see the item of “Curve”。 As follows： 97 Figure 13-19 The content of the menu at the upper right corner of the page are respectively “Service Management” 、 “ Personnel Management” 、 “ Print” 、 “ Preview” 、“ Print Preview” 、“ Refresh” 、“ logout” 和“ Help” Now we will give a brief introduction of these functions "Service Management" can start or stop the service of graph 、 report and curve（the user will be Required with appropriate permissions），As follows： Figure 13-20 98 “Personnel Management” can edit or add users，As follows： Figure 13-21 Click on "Help"，it will show more details of the NC2000 Web browser system Figure 13-22 99 ... the manual, users may expertly master NC2000 and contribute to the automatization of electric system guide target This volume ,as second volume of NC2000, major in operations object The whole manual. .. functions and basic usage of system software NC2000 The main purpose is to enable readers to master the basic usage of NC2000 system The main features of NC2000 monitoring system include: display... volume Logging on system, introduce how to enter NC2000 Picture display system, introduce how to employ picture display function of NC2000 Briefing ,introduce how to use briefing of NC2000 Schedule,