HƯỚNG DẪN CÀI ĐẶT PHẦN MỀM CONTROCAD I. Cài đặt các tham số cho máy tính Bước 1: Cài hệ điều hành Window XP SP2 IP Address: 10.18.0.63 Subnet Mask: 255.255.255.0 Name: ALSTOM Bước 2: Cài đặt các tham số hệ thống Video configuaration
HƯỚNG DẪN CÀI ĐẶT PHẦN MỀM CONTROCAD I. Cài đặt các tham số cho máy tính Bước 1: Cài hệ điều hành Window XP SP2 IP Address: 10.18.0.63 Subnet Mask: 255.255.255.0 Name: ALSTOM Language English Name ALSTOM Organization ALSTOM Computer name pc0063 Installation Directory \Windows Join Group Workgroup Administrator Accaunt Password(1) qq Netwwork setting Typical Settings Select This comphuter is on a network Workgroup WORKGROUP Bước 2: Cài đặt các tham số hệ thống - Video configuaration Desktop 1600by1200 Pixels Colour Palette Highest 32bits - Hard disk partitioning(500GB) Drive letter File system Volume lable Size asked(GB) C: NTFS SYSTEM 40 D: NTFS SWAP 25 E: NTFS CCAD 50 F: NTFS DATA 100 G: NTFS OTHERS 255 - Network parameter: Start→Setting→Control panel→Network and dial-up connections→Network conection Computer name Pc0063 Workgroup WORKGROUP Adapter(1) Boardcom Netxtreme57xx Name: Office Network IP Adress 10.18.0.63 Subnet Mask 255.255.255.0 Default Gateway Adapter(2) Intel 8255x_base PC2 Ethernet Name: S8000-E Network IP Adress 195.0.0.63 Subnet Mask 255.255.255.0 Default Gateway EXC-(1-6) 196.0.1.63(Từ 1-6 tương ứng H1-H6) 255.255.255.0 II. Cài đặt các phần mềm mở rộng khác Phần mềm máy in Acrobat7.0 Cài đặt phần mềm java III. Cài đặt ORACLE Bước 1: Chuẩn bị cho cài đặt ORACLE - FTP Service Installation - Insert CD Windown SP2 To install the FTP service with Windows 2000 or XP, you have to install IIS. To install IIS, use Add/Remove Programs in the control panel. In Add/Remove program, select Add/Remove Windows Components. In the Windows Components Wizard, IIS is called Internet Information Services. Click on "Internet Services (IIS)" to add the IIS component. Confirm by OK and Next. The wizard configures the components. In Windows XP be sure to click on Details to check that the FTP service is selected, as it is not selected by default. Click on End to finish the installation. Close the add program module. IIS is now installed. - FTP Service Parameter Open Control Panel of Window Open Administrative Tools. Open Computer Management. Open Properties on the Default FTP Site (right click). Click on Write box on the FTP Site Directory and verify the Read and Log visits box. Confirm by Apply and OK. Bước 2: Cài đặt phần mềm ORACLE cho máy Server Yêu cầu: Computer name pc0063 Destination Name Ora92 Destination Path E:\Oracle\ora92 Product to install Oracle9i Database 9.2.0.1.0 Installation type Standard Configuaration Software 1- Cài đặt các CD1-CD3 - When the first CD is run the following screen appears. The CDs no longer need to be copied onto the hard disk as the Pentium IV bug of the Oracle installer has been corrected. Click on Start installation or, if this is not the first installation, on Install/Uninstall products. - If the disk does not start automatically, the installation can be run manually by clicking on setup.exe. In principle, the language of the install program is that of the OS. - In this form, input the name is Ora92 of the Ora9i installation and the installation directory E:\oracle\ora92 (depending on the server partitions) Click on Next to select the products. - In the case this of a server, select Oracle 9i Database, then click on Next. - Select the Standard Edition version then click on Next. Select Software Only, as the database is configured by Controcad. Then click on Next. [...]... Yes to quit the installation The installation is terminated; the services can now be restarted III Cài đặt phần mềm CONTROCAD Any previous version of Controcad must be uninstalled before installing this software Use the "Add/Remove programs" utility in the Windows NT configuration panel Cf 3.5 Uninstall Controcad The type of station (client or server) is determined by the presence or absence of the ORACLE... automatically from the CD; a message advises the deactivation of antivirus software during the installation process This panel informs the user as to the type of ORACLE station (CONTROCAD CLIENT or CONTROCAD SERVER) and, in the case of a Controcad server, whether the database instance is an "initialized" or "uninitialized ORACLE 9i Database Server" Click on Next If the FTP software is not present on a server... Confirm the name or input a destination is E:\P320 directory name of your choice and click on Next This is the root used to contain the local data Confirm the name or input a software destination is E:\P320\Data directory of your choice and click on Next On the server only, this is the root directory utilized to host all of the shared CONTROCAD data (mimic views, documentation etc.) and the ORACLE table... Uninstalling Oracle) - Click on Next The product installation summary appears Click on Install - The end of installation message appears; click on Exit - Then confirm by Yes to quit the installation 3- Cài đặt patch 9.2.0.5 The patch is installed in two phases; first install Oracle Universal Installer Version 10.1.0.2 then install the 9.2.0.5 patch If Universal Installer 10.1.0.2 is not installed, running... document) Comment: If you attempt to install the Controcad software over a previous version, a panel asking you to uninstall the previous version is displayed Run the Add/Remove programs utility in the Windows Control Panel) 3.2 Selecting the Destination Directories The window below is displayed when Setup is executed for the first time This is the root used for the CONTROCAD software Confirm the name or input... 1521), then click Next Respond No to the configuration of another Listener module then click Next The Listener is now configured; the OracleTNSListener service is created and runs affter click Finish 2- Cài đặt patch 9.2.0.4 - To correct a problem due to the Oracle ADO provider, install the patch 9.2.0.4 This patch is not included in patch 9.2.0.5 Run the installation by executing the setup.exe located... destination is E:\P320\Share directory of your choice and click on Next If the destination directory does not exist, the installation software displays a confirmation panel Click on OK to create the directory 3.3 Selecting the Installation Components The window below is used to select the components to be installed By default the components corresponding to the Controcad PC type (Server or Client) are selected... the components corresponding to the Controcad PC type (Server or Client) are selected It is possible to select components in accordance with the functional constraints of CONTROCAD For example, although it is impossible to select the Controcad software without also selecting the Perl component, you can select SDA server on a client station if you want the station to execute the SDA server function ...- Click on Next to display a summary of the options chosen - Click on Install to run the installation or on Back if the selection needs to be modified - The installation executes Change the CD in the drive when requested by the installation program 3CD . server, select Oracle 9i Database, then click on Next. - Select the Standard Edition version then click on Next. Select Software Only, as the database is configured by Controcad. Then click on. File system Volume lable Size asked(GB) C: NTFS SYSTEM 40 D: NTFS SWAP 25 E: NTFS CCAD 50 F: NTFS DATA 100 G: NTFS OTHERS 255 - Network parameter: Start→Setting→Control panel→Network and dial-up. name pc0063 Destination Name Ora92 Destination Path E:Oracleora92 Product to install Oracle9i Database 9.2.0.1.0 Installation type Standard Configuaration Software 1- Cài đặt các CD1-CD3 - When