Volume 06 - Welding, Brazing and Soldering Part 18 pot

[...]... PRESSURE PREHEAT RATE OF FLOW kpa m3/h kpa m3/h psi CUTTING WITH STANDARD-PRESSURE TIPS ft3/h psi MPS GAS CUTTING PRESSURE ft3/h kpa psi CUTTING RATE OF FLOW m3/h KERF WIDTH ft3/h mm in CUTTING WITH HIGH-SPEED TIPS TABLE 7 APPROXIMATE DEPTHS OF HAZ IN OXYGEN CUT CARBON STEELS PLATE THICKNESS HAZ DEPTH MM IN MM IN LOW-CARBON STEELS HIGH-CARBON STEELS • • • • • • • • • • • • TORCH SETTINGS FOR BAR A(A) . in. CUTTING WITH STANDARD-PRESSURE TIPS CUTTING WITH HIGH-SPEED TIPS TABLE 7 APPROXIMATE DEPTHS OF HAZ IN OXYGEN CUT CARBON STEELS PLATE THICKNESS HAZ DEPTH MM IN. MM IN. LOW-CARBON STEELS HIGH-CARBON STEELS