Volume 06 - Welding, Brazing and Soldering Part 11 ppt

[...]...Flux-Cored Arc Welding Gas-shielded electrodes TABLE 9 ELECTRODES FOR FCAW APPLICATIONS Self-shielded electrodes T-3 and T-10 Types The T-4, T-7, and T -1 1 types T-6 and T-8 Types Gas-Tungsten Arc and Plasma Arc Welding Submerged Arc Welding Flux Selection Active fluxes Neutral fluxes Intermediate Activity... AND PLASMA WELDING, ASM HANDBOOK, MIG WELDING HANDBOOK, SUBMERGED ARC WELDING HANDBOOK, TIG WELDING HANDBOOK, WELDING HANDBOOK, Welding of Low-Alloy Steels F.J Winsor, Welding Consultant Introduction • • • • • • • • • • • • Welding Processes Welding of Low-Alloy Steels F.J Winsor, Welding Consultant Welding Consumables Filler Metals and Fluxes Shielding Gases Gas-Tungsten Arc Welding (GTAW) and Plasma... OF WELDING, THE PROCEDURE HANDBOOK OF ARC WELDING, PREFERRED ORIENTATION IN THE WELD FUSION ZONE, WELDING HANDBOOK, MODERN WELDING TECHNOLOGY, WHICH PROCESS?, WELDING METALLURGY, WELDING HANDBOOK, WELDING HANDBOOK, WELDING HANDBOOK, WELDING HANDBOOK, Arc Welding of Carbon Steels Ronald B Smith, The ESAB Group, Inc Selected References WELD J., SUBMERGED ARC WELDING, WELD J., WELDING METALLURGY, TIG AND. .. Postweld heat treatment • • • References cited in this section WELDING HANDBOOK, METALS AND THEIR WELDABILITY, Welding of Low-Alloy Steels F.J Winsor, Welding Consultant High-Strength Low-Alloy Quenched and Tempered (HSLA Q&T) Structural Steels TABLE 4 NOMINAL COMPOSITION AND TENSILE PROPERTIES OF SELECTED QUENCHED AND TEMPERED LOW-ALLOY STRUCTURAL STEELS ... ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ Gas-Metal Arc Welding (GMAW) and Gas-Tungsten Arc Welding (GTAW) Flux-Cored Arc Welding (FCAW) Submerged Arc Welding (SAW) Electroslag Welding (ESW) and Electrogas Welding (EGW) Welding Procedures and Practices Preheating TABLE 3 MINIMUM PREHEAT AND INTERPASS TEMPERATURES TO WELD HSLA STRUCTURAL STEELS USING LOW-HYDROGEN WELDING PROCESSES ≤ ≤ Postweld heat... Shielding Gases Gas-Tungsten Arc Welding (GTAW) and Plasma Arc Welding (PAW) Gas-Metal Arc Welding (GMAW), Flux-Cored Arc Welding (FCAW), and Electrogas Welding (EGW) Reference cited in this section Welding of Low-Alloy Steels F.J Winsor, Welding Consultant High-Strength Low-Alloy (HSLA) Structural Steels TABLE 1 TYPICAL COMPOSITION AND STRENGTH PROPERTIES OF HSLA STRUCTURAL STEELS Filler Metal Selection... TYPICAL MECHANICAL PROPERTIES OF WELD METAL FROM ELECTROSLAG WELDS IN CARBON AND ALLOY STEELS TABLE 15 TYPICAL MECHANICAL PROPERTIES OF WELD METAL (IN AS-WELDED CONDITION) OBTAINED WITH ELECTROSLAG WELDS IN STRUCTURAL STEELS Stud Arc Welding References cited in this section WELDING HANDBOOK, WELDING HANDBOOK, WELDING HANDBOOK, WELDING HANDBOOK, Arc Welding of Carbon Steels Ronald B Smith, The ESAB Group,... STEEL GRADES COMMONLY JOINED BY ELECTROGAS WELDING PROCESS TABLE 11 CHEMICAL COMPOSITION FOR SOLID CARBON STEEL ELECTRODES USED IN ELECTROGAS WELDING TABLE 12 COMPOSITION OF WELD METAL OBTAINED WHEN USING COMPOSITE FLUX-CORED AND METAL-CORED ELECTRODES TABLE 13 TYPICAL AS-WELDED MECHANICAL PROPERTIES OF ELECTROGAS WELDS OBTAINED WHEN USING FLUX-CORED ELECTRODES Electroslag Welding (Ref 27, 28) Process Variations . Flux-Cored Arc Welding Gas-shielded electrodes TABLE 9 ELECTRODES FOR FCAW APPLICATIONS Self-shielded electrodes T-3 and T-10 Types. The T-4, T-7, and T -1 1 types T-6 and T-8 Types. Gas-Tungsten. alt="" Low-Alloy Steel Electrodes. Gas-Metal Arc Welding TABLE 7 COMPOSITION REQUIREMENTS FOR GMAW ELECTRODES USED TO WELD CARBON STEELS TABLE 8 MECHANICAL-PROPERTY REQUIREMENTS FOR WELD-METAL. OXYGEN AND NITROGEN LEVELS OBTAINED IN WELD METAL FROM S ELECTED ARC WELDING PROCESSES. SOURCE: REF 14 References cited in this section THE PROCEDURE HANDBOOK OF ARC WELDING, WELDING HANDBOOK, MODERN