Stabilizers 1 Section XX Stabilizers 2 Plastics Additives Akcros Chemicals America: Additives for Rigid PVC Applications: General Purpose Stabilizers: T-4654: Weather Ability: Excellent Color Hold, Term Stability, Clarity, Flexible PVC, Plastisols: Recommended Odor, Lubricity: Good T-4791: Color Hold, Rigid Foam: Excellent Term Stability: Recommended Clarity, Weather Ability, Flexible PVC, Odor, Lubricity, Plastisols: Good T-4905: Term Stability, Clarity, Weather Ability, Flexible PVC: Excellent Odor: Recommended Color Hold, Lubricity, Plastisols: Good T-5003: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Clarity, Flexible PVC, Odor: Good T-5005: Odor, Lubricity, Rigid Foam: Excellent Color Hold, Term Stability, Clarity, Weather Ability, Flexible PVC: Good T-5007: Color Hold, Lubricity: Excellent Term Stability, Weather Ability: Recommended Clarity, Flexible PVC, Odor: Good T-5063: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Flexible PVC: Recommended Lubricity, Plastisols: Good T-5095: Color Hold, Clarity, Odor: Excellent Term Stability, Weather Ability, Flexible PVC: Recommended Lubricity: Good T-5160: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Odor: Good Stabilizers 3 Akcros Chemicals America: Additives for Rigid PVC Applications (Continued): General Purpose Stabilizers (Continued): T-5172: Color Hold, Term Stability, Weather Ability: Excellent Lubricity: Recommended Odor: Good T-5178: Color Hold, Term Stability, Weather Ability, Lubricity: Excellent Odor: Good T-7020: Color Hold, Clarity, Weather Ability, Odor: Excellent Term Stability, Lubricity: Recommended Food Grade Applications: T-883: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended T-885: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended T-7021: Color Hold, Term Stability, Clarity, Weather Ability, Odor: Excellent Lubricity: Recommended 4 Plastics Additives Akcros Chemicals America: Additives for Rigid PVC Applications (Continued): Specialty Applications: T-186: Term Stability, Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Clarity, Odor: Recommended Lubricity: Good T-876: Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Term Stability, Clarity, Odor: Recommended Lubricity: Good T-876A: Weather Ability, Flexible PVC, Plastisols: Excellent Color Hold, Term Stability, Clarity, Odor: Recommended Lubricity: Good T-878M: Color Hold, Clarity, Weather Ability, Flexible PVC, Plastisols: Excellent Term Stability, Odor: Recommended Lubricity: Good T-5507A: Weather Ability: Excellent Color Hold, Term Stability, Clarity, Flexible PVC, Odor, Lubricity, Plastisols: Recommended TL: Lubricity, Plastisols: Excellent Color Hold, Term Stability, Clarity, Weather Ability, Flexible PVC, Odor: Recommended Stabilizers 5 Akcros Chemicals America: Stabilizers for Flexible Vinyl: AKCROS’ ABC Line-Foam Stabilizer/Activators: Akcros stabilizer/activators have been formulated to provide controlled, uniform gas evolution for the production of PVC foams utilizing azodicarbonamide as the blowing agent. The ABC series of blowing agent catalysts are primary materials and act as both heat stabilizers and gas generation activators. No secondary stabilizer is normally required. Thus, with the availability of such blowing agent catalysts, the use range of azodicarbonamide is extended to a significant degree. ABC-1: Decomposition Range: 340 to 360F Activity Rate: High ABC-2: Decomposition Range: 330 to 350F Activity Rate: High ABC-6*: Decomposition Range: 390 to 400F Activity Rate: Low ABC-7: Decomposition Range: 390 to 410F Activity Rate: Low ABC-18: Decomposition Range: 340 to 360F Activity Rate: Medium ABC-4810: Decomposition Range: 330 to 350F Activity Rate: High · *Note: ABC-6 functions as a stabilizer/de-activator resulting · in a controlled blow with very fine cell structure. 6 Plastics Additives Akcros Chemicals America: Stabilizers for Flexible Vinyl: Calcium Zinc Based Stabilizers: General Purpose: LT-2001M: Heat Stability, Printability, Plastisol: Excellent Lubricity, Clarity, Extrusion/Inj.Mldg., Calendering: Good LT-4468: Plastisol: Excellent Printability: Recommended Heat Stability, Clarity: Good CAZ-4842: Heat Stability, Plastisol: Excellent Clarity: Good CAZ-4949: Heat Stability: Excellent Lubricity, Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering: Recommended Food Contact: CZ-11D: Foam Activation, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Heat Stability, Lubricity, Clarity: Good CZ-19A: Heat Stability, Lubricity, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended Clarity: Good CZL-717: Clarity, Plastisol: Excellent Heat Stability, Low Plateout, Printability: Recommended Foam Activation, Calendering: Good CZL-720: Clarity, Plastisol: Excellent Printability: Recommended Heat Stability, Low Plateout, Foam Activation: Good CZL-720A: Clarity, Plastisol: Excellent Heat Stability, Printability: Recommended Low Plateout, Foam Activation, Extrusion/Inj.Mldg., Calendering: Good Stabilizers 7 Akros Chemicals America: Stabilizers for Flexible Vinyl: Chelators and Auxiliaries: CH-55 (FDA): Printability, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Heat Stability, Clarity: Good CH-301: Printability: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended Clarity, Plastisol: Good P-2307*: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Low-odor/Volatility, Printability: Good SA-5038: Printability: Excellent Heat Stability, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended Ca Stearate: Heat Stability, Lubricity: Excellent Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering: Recommended Printability: Good Zn Stearate: Lubricity: Excellent Low-odor/Volatility, Foam Activation, Extrusion/Inj.Mldg., Calendering: Recommended Heat Stability, Clarity, Printability: Good *Note: PLASTOFLEX 2307 is a high-quality epoxidized soy bean oil with a minimum oxirane content of 6.8%. 8 Plastics Additives Akcros Chemicals America: Stabilizers for Flexible Vinyl: Metal Soap Based Stabilizers: Barium Cadmium Based Stabilizers: BC-103A: Heat Stability, Clarity, Foam Activation, Extrusion/Inj. Mldg., Calendering, Plastisol: Recommended Printability: Good BC-103L: Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity, Clarity, Printability, Plastisol: Good BC-111: Extrusion/Inj.Mldg., Calendering: Recommended Heat Stability, Clarity, Printability, Plastisol: Good BC-4746S: Heat Stability, Printability, Extrusion/Inj. Mldg., Calendering: Excellent Lubricity, Clarity, Low Plateout: Recommended Low-odor/Volatility: Good BC-4962: Heat Stability, Lubricity, Extrusion/Inj. Mldg., Calendering: Excellent Barium Zinc Based Stabilizers: LT-4797: Heat Stability, Low Plateout, Printability: Recommended Clarity, Low Fog, Extrusion/Inj.Mldg., Calendering, Plastisol: Good LT-4798: Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg., Plastisol: Recommended Lubricity, Foam Activation, Calendering: Good LT-4813: Heat Stability, Low Plateout, Printability, Calendering: Excellent Lubricity, Clarity, Foam Activation, Extrusion/Inj. Mldg.: Recommended BZ-4903M: Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity, Clarity: Good BZ-4929: Heat Stability, Foam Activation: Excellent Extrusion/Inj.Mldg., Calendering: Recommended Printability: Good Stabilizers 9 Akcros Chemicals America: Stabilizers for Flexible Vinyl: Metal Soap Based Stabilizers (Continued): Barium Zinc Based Stabilizers (Continued): BZ-4946: Clarity: Excellent Heat Stability, Low Plateout, Printability, Extrusion/Inj. Mldg., Calendering: Recommended Lubricity: Good BZ-4951: Heat Stability, Lubricity, Calendering: Excellent Low-odor/Volatility, Extrusion/Inj. Mldg.: Recommended BZ-4975: Low-odor/Volatility: Excellent Heat Stability, Extrusion/Inj.Mldg.: Recommended Lubricity, Clarity: Good BZ-4996: Clarity: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended Lubricity, Low Plateout: Good BZ-5023: Low-odor/Volatility, Low Fog: Excellent Heat Stability, Extrusion/Inj.Mldg.: Recommended Low Plateout: Good BZ-5043: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering: Excellent Low Plateout, Printability: Excellent Lubricity: Good BZ-5046: Low Fog: Excellent Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended BZ-4922: Heat Stability, Lubricity, Low-odor/Volatiliy: Excellent Low Fog, Foam Activation: Recommended Barium Zinc ESO Blends: LT-4801: Plastisol: Recommended Heat Stability, Clarity, Printability, Extrusion/Inj.Mldg., Calendering: Good LT-4803: Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering, Plastisol: Recommended Printability, Foam Activation: Good BZ-4864: Printability, Calendering: Recommended Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg.: Good 10 Plastics Additives Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin Carboxylates: Butyl: DBTL/C: Fields: Plastisol Properties: Transparent, Weather resistant, Low odor, Phenol-free, Limited self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 70 Color Gardner (max.): 3 Density at 20C (g/cm3): 1.05 M 15: Fields: Plastisol Properties: Transparent, Weather resistant, Low odor, Phenol-free, Limited self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 130 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.08 MS: Fields: Extrusion, Blown Films, Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Low fogging, Stabilizing E-PVC, High Vicat temperature Powder Color Gardner (max.): White Density at 20C (g/cm3): 1.50 MSL: Fields: Extrusion, Rigid PVC: Technical Properties: Transparent, Weather resistant, Low odor, Phenol-free, No self-lubrication, Very good initial color, Stabilizing E-PVC Viscosity at 20C (mPa.s): 800 Color Gardner (max.): 2 Density at 20C (g/cm3): 1.34 [...]... 66.5-69.5 Density (g/cm3): 3. 3 Barostab V 220 MC/DOP: Residue on ignition (%): 93. 0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6 Barostab V 220 MC/DIDP: Residue on ignition (%): 93. 0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6 Barostab V 220 TM: Residue on ignition (%): 93. 0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6 Barostab V 220 MC/B: Residue on ignition (%): 93. 0-96.0 Lead... Residue on ignition (%): 90.0- 93. 0 Lead content (%): 76.0-79.0 Density (g/cm3): 5.2 Basis PEBETAL: Barostab E 5 03: Residue on ignition (%): 67.7-69.7 Lead content (%): 62.6-65.6 Density (g/cm3): 3. 0 Pebetal B: Residue on ignition (%): 76.0-79.0 Lead content (%): 70.6- 73. 6 Density (g/cm3): 4 .3 Pebetal-DOP: Residue on ignition (%): 76.0-79.0 Lead content (%): 70.6- 73. 6 Density (g/cm3): 4.1 Pebetal TM: Residue... Density (g/cm3): 6.1 20 Plastics Additives Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications: Basis BAROSTAB V 220 MC: BAROSTAB E 500: Residue on ignition (%): 83. 1-87.1 Lead content (%): 72.0-76.0 Density (g/cm3): 3. 8 Barostab TX 500: Residue on ignition (%): 79.5-82.5 Lead content (%): 66.5-69.5 Density (g/cm3): 3. 3 Barostab SMS 500: Residue on ignition (%): 80.6- 83. 6 Lead... Lead content (%): 64.5-67.5 Density (g/cm3): 3. 2 Basis Pebefos: Barostab E 502: Residue on ignition (%): 88.2-91.2 Lead content (%): 73. 0-76.0 Density (g/cm3): 4.0 Pebefos /ND: Residue on ignition (%): 95.0-98.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5 .3 Barostab SMS 502: Residue on ignition (%): 81.9-84.9 Lead content (%): 67.8-70.8 Density (g/cm3): 3. 2 24 Plastics Additives Ciba Specialty Chemicals:... Lead content (%): 70.6- 73. 6 Density (g/cm3): 4.1 Pebetal LTM: Residue on ignition (%): 71.1- 73. 1 Lead content (%): 64.0-67.0 Density (g/cm3): 3. 3 22 Plastics Additives Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications (Continued): Basis BAROSTAB Pb 51 S: Barostab E 504: Residue on ignition (%): 49.0-52.0 Lead content (%): 44.5-47.5 Density (g/cm3): 1.8 BAROPAN Pb 51 S/ES:... Polyolefins: TINUVIN 1 23: Molecular Weight: 737 .2 Melting Point C: liquid Specific Gravity @ 20C: 0.97 TGA: temp at 10% Wt Loss: 265 Appearance: pale yellow liquid Tinuvin 234 : Molecular Weight: 448 Melting Point C: 135 -141 Specific Gravity @ 20C: 1.22 TGA: Temp @ 10% Wt Loss: 31 5 Appearance: Light yellow powder Tinuvin 32 6: Molecular Weight: 31 6 Melting Point C: 140-141 Specific Gravity @ 20C: 1 .32 TGA: Temp... powder Tinuvin 32 7: Molecular Weight: 35 8 Melting Point C: 154-158 Specific Gravity @ 20C: 1.26 TGA: Temp @ 10% Wt Loss: 235 Appearance: pale yellow powder Tinuvin 32 8: Molecular Weight: 35 1.5 Melting Point C: 79-87 Specific Gravity @ 20C: 1.17 TGA: Temp @ 10% Wt Loss: 230 Appearance: off-white powder Tinuvin 622: Melting Point C: 55-70 Specific Gravity @ 20C: 1.18 TGA: Temp @ 10% Wt Loss: 33 5 Appearance:... 29.0 -31 .0 Lead content (%): 28.0 -30 .0 Density (g/cm3): 1.4 Stabilizers 23 Baerlocher U.S.A.: Lead Stabilizers: Characteristics of Commodity Modifications (Continued): Basis PEBEFOS FP: BAROSTAB E 502 FP: Residue on ignition (%): 87 .3- 90 .3 Lead content (%): 73. 0-76.0 Density (g/cm): 4.4 Pebefos FP/ND: Residue on ignition (%): 94.0-97.0 Lead content (%): 78.8-81.0 Density (g/cm3): 5.9 Pebefos XS: Residue... off-white powder Chimassorb 2020: Molecular Weight: 2600 -34 00 Melting Point C: 120-150 Specific Gravity @ 20C: 1.01 TGA: Temp at 10% Wt Loss: 37 5 Appearance: transparent, slightly yellow pellets Stabilizers 35 Ciba Specialty Chemicals: Light Stabilizer Systems: Product TINUVIN 111: Tinuvin 1 23 S: Tinuvin 492: Tinuvin 494: Tinuvin 7 83: Tinuvin 791: Tinuvin C 35 3: IRGASTAB FS 210: Irgastab FS 410: Irgastab FS... Density (g/cm3): 1.9 Barostab Pb 51 S/DOP: Residue on ignition (%): 52.8-55.8 Lead content (%): 48.0-51.0 Density (g/cm3): 1.9 Barostab Pb 51 S/TM: Residue on ignition (%): 52.8-55.8 Lead content (%): 48.0-51.0 Density (g/cm3): 1.9 Basis Pb 28 F: Barostab Pb 28 AV: Residue on ignition (%): 28.4 -30 .4 Lead content (%): 27.0-29.0 Density (g/cm3): 1.4 Barostab TX Pb 28: Residue on ignition (%): 29.0 -31 .0 Lead . Range: 34 0 to 36 0F Activity Rate: High ABC-2: Decomposition Range: 33 0 to 35 0F Activity Rate: High ABC-6*: Decomposition Range: 39 0 to 400F Activity Rate: Low ABC-7: Decomposition Range: 39 0 to. 72.0-76.0 Density (g/cm3): 3. 8 Barostab TX 500: Residue on ignition (%): 79.5-82.5 Lead content (%): 66.5-69.5 Density (g/cm3): 3. 3 Barostab SMS 500: Residue on ignition (%): 80.6- 83. 6 Lead content. 66.5-69.5 Density (g/cm3): 3. 3 Barostab V 220 MC/DOP: Residue on ignition (%): 93. 0-96.0 Lead content (%): 78.0-81.0 Density (g/cm3): 5.6 Barostab V 220 MC/DIDP: Residue on ignition (%): 93. 0-96.0 Lead