Hệ thống nhúng - Chương 3 doc

1 Hệ thống nhúng Thạc sĩ Lê Mạnh Hải Embedded Systems 2 Lesson 3 : NUMBERS Flight plan: • In this lesson we will review all the numerical data types offered by the MPLAB® C30 compiler. • We will learn how much memory the compiler allocates for the numerical variables and we will investigate the relative efficiency of the routines used to perform arithmetic operations by using the MPLAB • SIM Stopwatch as a basic profiling tool. This experience will help you choose the “right” numbers for your embedded-control application, understanding when and how to balance performance and memory resources, real-time constraints and complexity. 3 Preflight checklist • MPLAB IDE, Integrated Development Environment • MPLAB SIM, software simulator • MPLAB C30 compiler (Student Version) 4 The flight 1.MPLAB C30 User Guide 5 The flight unsigned long i,j,k; main () { i = 0x1234; // assign an initial value to i j = 0x5678; // assign an initial value to j k = i * j; // perform the product and store the result in k } 6 Assembly code 7 On optimization (or lack thereof) • In fact, the compiler does not see things this clearly—its role is to create “safe” code, avoiding (at least initially) any assumption and using standard sequences of instructions. • Later on, if the proper optimization options are enabled, a second pass (or more) is performed to remove the redundant code. • During the development and debugging phases of a project, though, it is always good practice to disable all optimizations as they might modify the structure of the code being analyzed and render single-stepping and breakpoint placement problematic. 8 Testing • Set the cursor on the first line containing the initialization of the first variable, and perform a Run To Cursor command to let the program initialize and stop the execution just before the first instruction we want to observe. • Open the Watch window (“View→Watch”) and select WREG0 in the SFR selection box, then click on the “Add SFR” button. • Repeat the operation for WREG1. • Select “i” in the symbol selection box, and click on the “Add Symbol” button. • Repeat the operation for j and k. • Use the “Step Over” function to execute the next few program lines, observing the effects on the registers and variables in the Watch window. As we noted before, when the value of a variable in the Watch window changes, it is conveniently highlighted in red. 9 Post-flight briefing • In this lesson, we have learned not only what data types are available and how much memory is allocated to them, but also how they affect the resulting compiled program— code size and the execution speed. • We used the MPLAB SIM simulator Stopwatch function to measure the number of instruction cycles (and therefore time) required for the execution of a series of code segments. • Some of the information gathered will, hopefully, be useful to guide our actions in the future when balancing our needs for precision and performance in embedded-control applications. 10 Interrupts • What is Interrupts? • Why does ES need more and more Interrupts? • How does Interrupts work? • How can we control Interrupts? [...]... sources • • • • • 5 × 16-bit Timers 1 × Analog-to-Digital Converter 1 × Analog Comparators module 1 × Real-time Clock and Calendar 1 × CRC generator 19 Exercises 1 2 3 4 Write a program that uses Timer2 as a stopwatch for real-time performance measurements If the width of Timer 2 is not sufficient: use the prescaler (and lose some of the lsb), or use Timer2 and Timer3 joined in the new 32 -bit timer mode Test... How the MPLAB® C30 compiler allows us to easily manage the interrupt mechanisms offered by the PIC24 microcontroller architecture • After a brief review of some of the C language extensions and some practical considerations, we will present a short example of how to use the secondary (low-frequency) oscillator to maintain a real-time clock 11 Preflight checklist • • • MPLAB IDE, MPLAB C30 compiler and... relative performance of the multiplication for complex data types 20 What is next? • CHAPTER 5: Interrupts (pg 53 - pg68) – – – – – – – Nesting of interrupts? A template and an example for Timer1 interrupt A real example with Timer1 Testing the Timer1 interrupt The secondary oscillator The real-time clock calendar (RTCC) Managing multiple interrupts • PIC24F family manuals Section 8 Interrupts • How to... • They cannot be called directly by other functions • Ideally, they should not call any other function 15 Interrupt service 1 2 3 4 void attribute (( interrupt)) _T1Interrupt ( void) { // interrupt service routine code here } // _InterruptVector 16 Interrupt service 1 2 3 4 void _ISR _T1Interrupt (void) { // interrupt service routine code here } // _InterruptVector 17 external sources • 5 × External... very short but it is also fixed for each given interrupt source—only three instruction cycles for internal events and four instruction cycles for external events 13 PIC24F Interrupt • Up to 8 processor exceptions and software traps • 7 user-selectable priority levels • Interrupt Vector Table (IVT) with up to 118 vectors • A unique vector for each interrupt or exception source • Fixed priority within... user priority level • Alternate Interrupt Vector Table (AIVT) for debug support • Fixed interrupt entry and return latencies 14 Interrupt Vector Table (IVT) MPLAB C30 compiler can automatically associate interrupt vectors with “special” user-defined C functions as long as a few limitations are kept in consideration, such as: • They are not supposed to return any value (use type void) • No parameter can... example of how to use the secondary (low-frequency) oscillator to maintain a real-time clock 11 Preflight checklist • • • MPLAB IDE, MPLAB C30 compiler and the MPLAB SIM simulator Use the “New Project Set-up” checklist to create a new project called “Interrupts” and a new source file similarly called “interrupts.c” 12 The flight • The PIC24 architecture provides a rich interrupt system that can manage . 1 Hệ thống nhúng Thạc sĩ Lê Mạnh Hải Embedded Systems 2 Lesson 3 : NUMBERS Flight plan: • In this lesson we will review all the numerical data types offered by the MPLAB® C30 compiler secondary (low-frequency) oscillator to maintain a real-time clock. 12 Preflight checklist • MPLAB IDE, • MPLAB C30 compiler and the MPLAB SIM simulator. • Use the “New Project Set-up” checklist. I2C™) • Parallel Master Port 19 internal sources • 5 × 16-bit Timers • 1 × Analog-to-Digital Converter • 1 × Analog Comparators module • 1 × Real-time Clock and Calendar • 1 × CRC generator 20 Exercises 1.