Graduation report bachelor of aeronautical engineering title

SCIENCE ANDTECHNOLOGY OF HANOI PARTNER INTERNSHIP PARTNER GRADUATION REPORT BACHELOR OF AERONAUTICAL ENGINEERING TITLE By Student name Student ID SUPERVISORS: EXTERNA L: PROF.. TABLE OF

SCIENCE AND

TECHNOLOGY OF

HANOI

PARTNER INTERNSHIP PARTNER

GRADUATION REPORT

BACHELOR OF AERONAUTICAL ENGINEERING

TITLE

By

Student name Student ID

SUPERVISORS:

EXTERNA

L: PROF DR NGUYỄN VĂN A, LAB NAME PROF DR NGUYỄN VĂN B, LAB NAME

INTERN

TABLE OF CONTENTS

ACKNOWLEDGEMENTS II LIST OF ABBREVIATIONS III LIST OF TABLES IV LIST OF FIGURES V SUMMARY/ABSTRACT VI

I INTRODUCTION 1

II OBJECTIVE 2

III MATERIALS, METHODS 3

IV RESULTS AND DISCUSSION 4

V CONCLUSION 7

REFERENCES 8

APPENDICES 1

i

Example:

“I would like to express my gratitude to those who gave me the possibility to complete this thesis in specific as well as academic supporting in general that I have received during the time of my studying at the University of Science and Technology of Hanoi Foremost, I would like to send my honest thanks to my supervisor ”

ii

LIST OF ABBREVIATIONS

Example

AMP Aircraft Maintenance Program

USTH University of Science and Technology of Hanoi

iii

LIST OF TABLES

EXAMPLE

TABLE 4-1: EXAMPLES OF PM/PE/PPM INSPECTION TIMES ……….

………… 11

iv

LIST OF FIGURES

Example

Figure 4-1: Example of Aircraft maintenance tools (Photo: rainger.com) 12

v

(No more than 250 words in English + 4 key words)

4 Keywords:

vi

I INTRODUCTION

Summary of current knowledge and literature

1

II OBJECTIVE

(Presenting in this section what this work is aiming at)

2

III MATERIALS, METHODS

(Presenting in this section the materials, the methods you have used)

3

IV RESULTS AND DISCUSSION

(In this section, you must do a critical analysis and discuss the results you obtained with respect to the data already available in the technical literature if possible In case of failure, you have to analyse the reasons and propose an alternative strategy Conclusions; critical assessment of your own work.)

Example of table to present your results (always choose between tables or figures)

Table 4-1: Examples of PM/PE/PPM Inspection Times

TYPE OF

AIRCRAFT NUMBER OF PHASES PER

CYCLE

TIME BETWEEN PHASES (FLIGHT HOURS)

TOTAL TIME OF CYCLE

Example of figure to present your results:

4

Figure 4-1: Example of Aircraft maintenance tools (Photo: grainger.com)

5

V CONCLUSION

The conclusion recapitulates the main achievements of your work

6

References should follow the Harvard system (alphabetic), which means all the references should be in an alphabetical order

The international journals’ names should be abbreviated as regulated (Please refer to the list of abbreviations for the International journals via this website: https://images.webofknowledge.com/images/help/WOS/A_abrvjt.html)

Any cited reference follows the template as below:

Article:

Sanger J, Nicklen S, Coulson AR (1977) DNA sequencing with the chain-termination inhibitors Proc Natl Acad Sci USA 74: 5463-5467.

Book:

Sambrook J, Russell DW (2001) Molecular Cloning A Laboratory Manual, 3rd ed Cold Spring Harbor Laboratory, Cold Spring Harbor, NY

In case, there are many chapters or parts in one book:

Voytas DF, Boeke JD (2002) Tyl and Ty5 of Saccharomyces cerevisiae In Craig NL, Claigie R, Gellert M, Lambowitz AM, eds Mobile DNA II ASM Press, Washington, DC: 631-632.

Thesis/Dissertations

Santanen A (2000) Polyamine metabolism during development of somatic and zygotic embryos of Picea abies PhD dissertation Department of Biosciences, University of Helsinki, Finland.

Patent, conference document, online document and other documents: should follow the

citations in international journals

7

APPENDIX 1

1

APPENDIX 2

2