.Lubricants and Lubrication Edited by Theo Mang and Wilfried DreselLubricants and Lubrication. 2nd pptx

[...]... Other Standardized and Non-Standardized Test Methods and Test Machines for Lubricants 783 Interpretation and Precision of Lubricant Tests 784 786 Subject Index 837 780 XXXIII Preface, Foreword 2nd edition Six years after the publication of “Lubricants and Lubrication , its high acceptancy motivated the publisher and the editors to realize a second edition The result is this largely revised and extended... as functional elements and as media which influence service life and increasingly safety and environmental protection officers who are responsible for workplace safety, an acceptable use of resources along with the reduction or avoidance of emissions and wastes Mannheim, December 2006 Lubricants and Lubrication 2nd Ed Edited by Th Mang and W Dresel Copyright  2007 WILEY-VCH Verlag GmbH & Co KGaA, Weinheim... Solid Lubricants in Carrying Media 704 Dispersions and Suspensions 704 Greases and Grease Pastes 704 Pastes 706 Dry-Film Lubricants 706 Industrial Uses of Products Containing Solid Lubricants 710 Screw Lubrication 711 Roller-Bearing Lubrication 712 Slide Bearing, Slide Guideway, and Slide Surface Lubrication 713 Chain Lubrication 713 Plastic and Elastomer Lubrication 713 17.1.2.3 17.1.3 17.1.4 17.2 17.2.1... Helmut Seidel, FUCHS LUBRITECH GmbH, Weilerbach, Gisela Dressler, FUCHS PETROLUB AG, Mannheim, Germany; Ursula Zelter, FUCHS PETROLUB AG, Mannheim, Germany and Jochen Held, Bolanden-Weierhof, Germany Lubricants and Lubrication 2nd Ed Edited by Th Mang and W Dresel Copyright  2007 WILEY-VCH Verlag GmbH & Co KGaA, Weinheim ISBN: 978-3-527-31497-3 ... Hot 625 Friction and Lubrication with Cold Extrusion and Cold Forging 625 Friction and Lubricant Testing Methods 626 Selection Criteria for Lubricants and Lubrication Technology 628 Lubricating Oils for Cold Extrusion of Steel (Extrusion Oils) 629 Phosphate Coatings and Soap Lubricants for Cold Extrusion of Steel 631 Solid Lubricants for Cold Extrusion of Steel 634 Warm Extrusion and Forging 636 Temperature... 15.2.4.2 15.2.5 15.2.5.1 15.2.5.2 15.2.5.3 15.2.6 15.2.6.1 15.2.6.2 15.2.7 15.2.7.1 15.2.7.2 15.2.7.3 15.2.8 Friction and Lubrication, Tools, and Machines 573 Forming Classification 573 Friction and Lubrication, Machines and Tools when Wire Drawing 574 Drawing Force and Tension 575 Drawing Tool and Wear 577 Wire Cracks 579 Hydrodynamic Drawing 579 Wire Friction on Cone 579 Lubricant Feed in Wet Drawing 582... Push-Belt and Fluid 774 Standardized Test Rigs and Test Methods 775 ZF Universal Variator Test Bench 775 Van Doorne Test Bench 777 Performance Tests for Hydraulic Fluid Applications 777 Field of Application 777 Function of Vane Pumps 778 Standardized Vane Pump Test Machines and Test Methods 778 Function of Axial Piston Pumps 779 Standardized Axial Piston Pump Test Machines and Test Methods Nonstandardized... Minimum Quantity Lubrication 513 Considerations When Dispensing with Coolants 514 Minimum Quantity Lubrication Systems 515 Coolants for Minimum Quantity Lubrication 516 Oil Mist Tests with Minimum Quantity Lubrication 518 Product Optimization of a Minimum Quantity Coolant Medium for Drilling 520 15 Forming Lubricants 15.1 Sheet Metal Working Lubricants 522 Theo Mang, Franz Kubicki, Achim Losch and Wolfgang... mankind but the scientific analysis of lubrication, friction and wear as an aspect of tribology is relatively new The reduction of friction along with the reduction or even avoidance of wear by the use of lubricants and lubrication technologies results in energy savings, the protection of resources and also fewer emissions These benefits describe the economic and ecological importance of this field... 15.1.12.13 Friction and Lubrication in the Different Areas of a Deep Drawing Operation 527 Significance of Lubrication Dependent upon Sheet Metal Thickness, Drawn-part Size and the Efficiency of Deformation 531 Assessment of the Suitability of Lubricants for Deep Drawing 533 Stretch Drawing and a Combination of Stretch and Deep Drawing 534 Shear Cutting 535 Stamping 536 Fineblanking 539 Material and Surface .