Trang 1 FACULTY FOR HIGH QUALITY TRAINING CAPSTONE PROJECT ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING TECHNOLOGY RESEARCH, PROPOSE SOLUTIONS AND MANUFACTURE THE CLUSTER OF CUTTING B
MINISTRY OF EDUCATION AND TRAINING HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY AND EDUCATION FACULTY FOR HIGH QUALITY TRAINING CAPSTONE PROJECT ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING TECHNOLOGY RESEARCH, PROPOSE SOLUTIONS AND MANUFACTURE THE CLUSTER OF CUTTING BLADES LECTURER: PHD DANG QUANG KHOA STUDENT : TRINH NHAT HOANG TO QUANG KHANH SKL010920 Ho Chi Minh City, August 2023 HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY AND EDUCATION FACULTY OF HIGH QUALITY TRANING *********** GRADUATION PROJECT RESEARCH, PROPOSE SOLUTIONS AND MANUFACTURE THE CLUSTER OF CUTTING BLADES Advisor: DANG QUANG KHOA, Ph.D Students: TRINH NHAT HOANG TO QUANG KHANH ID: 18143011 18143017 MAJOR: MACHINE MANUFACTURING TECHNOLOGY Ho Chi Minh City, August 2023 THE SOCIALIST REPUBLIC OF VIETNAM Independence – Freedom– Happiness Ho Chi Minh City, August 1st, 2023 GRADUATION PROJECT ASSIGNMENT Semester II/ academic year 2022-2023 Adviser: Ph.D Đặng Quang Khoa Authors: Trịnh Nhật Hoàng…………Student ID: 18143011… Training system: CLA Tô Quang Khánh …………Student ID: 18143017… Training system: CLA Topic code: 22223DT311 Topici: Research, propose solutions and manufacture the cluster of cutting blades Initial data and documents: - Capacity: 650kg/6h -Type of meat: Fresh, boneless pork belly - The size of the meat: 400x400x70 mm The main content of the project: - Choosing the blade material - Research and propose solutions - Calculation and design of the shaft, the key and rolling bearing - Fabrication and assembly - Real test - Report Expected products: - Explanation of calculation and design - Drawing set - Structure model of cluster of cutting blades Project delivery date: 15/03/2023 Project submission date: 21/07/2023 Presentation language: The report: Protection presentation: English x Vietnamese English x Vietnamese DEAN INDUSTRY LEADER ADVISER (Signed, full name) (Signed, full name) (Signed, full name) THE SOCIALIST REPUBLIC OF VIETNAM Independence – Freedom– Happiness Ho Chi Minh City, August 1st, 2023 ADVISOR’S EVALUATION SHEET Student name: Trinh Nhat Hoang Student ID: 18143011 Student name: To Quang Khanh Student ID: 18143017 Major: Mechanical Engineering Technology Project title: Research, propose solutions and manufacture the cluster of cutting blades Advisor: PhD Dang Quang Khoa EVALUATION Content of the project ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… 2.Strengths ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… 3.Weekness ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………………… Overall evaluation: (Excellent, Good, Fair, Poor) ………………………………………………………………………………………………… Mark: ………………… (in words……………………………………….) Evalution No MAX ACHIEVED POINT POINT CONTENT Structure of the capstone project 30 Student follows exactly the format the for capstone project given by FME 10 The motivation of the project is clearly provided in the thesis 10 The NEED of the project is clearly showed in the thesis 10 Main contents (demonstration that students have ability to): 50 Apply knowledge of math, engineering, and science Analyze and interpret data 10 Design and manufacturing the system, component or process the o meet needs 15 Improvement and development in future 15 Use the software and technical tool to solve the problem Real-life applications of capstone project 10 Products of capstone project 10 Total 100 Conclusion Accept Reject Ho Chi Minh City, August 1st, 2023 ADVISOR (Signature and Name) THE SOCIALIST REPUBLIC OF VIETNAM Independence – Freedom– Happiness Ho Chi Minh City, August 1st, 2023 PRE-DEFENSE EVALUATION SHEET Student name: Trinh Nhat Hoang Student ID: 18143011 Student name: To Quang Khanh Student ID: 18143017 Major: Mechanical Engineering Technology Project title: Research, propose solutions and manufacture the cluster of cutting blades Name of Reviewer: EVALUATION Content and workload of the project: ………………………………………………………………………………………………… ……………………………………………………………………………………………… …………………………………………………………………………………………… Strengths: ………………………………………………………………………………………………… ……………………………………………………………………………………………… …………………………………………………………………………………………… Weaknesses: ………………………………………………………………………………………………… ……………………………………………………………………………………………… …………………………………………………………………………………………… Approval for oral defense? (Approved or denied) ……………………………………………………………………………………………… Overall evaluation: (Excellent, Good, Fair, Poor) ……………………………………………………………………………………………… Mark: ………… (in words….……………………… ) Evalution No MAX ACHIEVED POINT POINT CONTENT Structure of the capstone project 30 Student follows exactly the format for capstone project given by FME 10 The motivation of the project is clearly provided in the thesis 10 The NEED of the project is clearly showed in the thesis 10 Main contents (demonstration that students have ability to): 50 Apply knowledge of math, engineering, and science Analyze and interpret data 10 Design and manufacturing the system, component or process to meet needs 15 Improvement and development in future 15 Use the software and technical tool to solve the problem Real-life applications of capstone project 10 Products of capstone project 10 Total 100 Conclusion Accept Reject Ho Chi Minh City, August 1st, 2023 REVIEWER (Sign with full name) THE SOCIALIST REPUBLIC OF VIETNAM Independence – Freedom– Happiness EVALUATION SHEET OF DEFENSE COMMITTEE MEMBER Student name: Trinh Nhat Hoang Student ID: 18143011 Student name: To Quang Khanh Student ID: 18143017 Major: Mechanical Engineering Technology Project title: Research, propose solutions and manufacture the cluster of cutting blades Name of Defense Committee Member: EVALUATION Content and workload of the project: ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………… Strengths: ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………… Weaknesses: ………………………………………………………………………………………………… ………………………………………………………………………………………………… ………………………………………………………………………………………… Approval for oral defense? (Approved or denied) ……………………………………………………………………………………………… Overall evaluation: (Excellent, Good, Fair, Poor) ……………………………………………………………………………………………… Mark: ………… (in words….……………………… ) Evalution No MAX ACHIEVED POINT POINT CONTENT Structure of the capstone project 30 Student follows exactly the format for capstone project given by FME 10 The motivation of the project is clearly provided in the thesis 10 The NEED of the project is clearly showed in the thesis 10 Main contents (demonstration that students have ability to): 50 Apply knowledge of math, engineering, and science Analyze and interpret data 10 Design and manufacturing the system, component or process to meet needs 15 Improvement and development in future 15 Use the software and technical tool to solve the problem Real-life applications of capstone project 10 Products of capstone project 10 Total 100 Conclusion Accept Reject Ho Chi Minh City, August 1st, 2023 COMMITTEE MEMBER (Sign with full name) ( ) 12.5 20+0,1 -0,1 12.5 12.5 412 20+0,1 -0,1 Ø6±0.07 4x45o 2-M6 GRADUATION THESIS Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design T.NHAT HOANG Scale: 3:1 Mass: 0.28 Kg SCREW SHAFT 06 Sheet: Quantity: MCM00-06 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin Sign Date 12.5 10 10±0.075 553 ( 3.2 ) 3.5±0.06 B 1x45o 100±0.07 172 12 12 103.5±0.07 12 172±0.08 12±0.035 605 176 176±0.08 8 D C D C +0,12 40 4+0,12 6.3 6.3 6.3 6.3 6.3 8-0,15 -0,51 8-0,15 -0,51 SECTION C-C SCALE : SECTION D-D SCALE : APPLY FOR POSITION 3.2 Ø25h9-0,05 8±0.075 1 DETAIL B SCALE : 107.5±0.07 6.3 Ø23-0,05 102±0.07 GRADUATION THESIS Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design T.NHAT HOANG Scale: 1:2 Mass: 2.34 Kg Sign Date SHAFT 04 Sheet: MCM00-04 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin Quantity: ( 25+0.1 7.2+0.05 -0.05 3.2 ) Ø85.21+0.02 -0.02 8+0.02 -0.02 17.8 6.3 Ø25H7+0.02 6.3 12.5+0.01 -0.01 3.2 3.3+0.12 0.5x45o ° 90 0.5x45o Ø60+0.15 -0.15 6.3 2-M6THRU ALL GRADUATION THESIS Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design T.NHAT HOANG Sign Date SSP40B21-S-25 / MISUMI-08 MCM00-08 Scale: 1:1 Mass: 0.60 Kg Sheet: Quantity: HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin ( 22+0.1 ) 6±0.018 6.3 14.8 11±0.01 ° 90 2.8+0.02 6.3 7.2±0.05 3.2 6.3 Ø22+0.02 3.2 2-M5THRU ALL GRADUATION THESIS Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer ADDITIONAL PROCESSING Name Advisor ĐQ.UANGKHOA Check Đ Q.UANGKHOA Design TO.Q.KHANH Sign Date SSP40B13-S-20 MISUMI-12 MCM00-12 Scale: 1:1 Mass: 0.18 Kg Sheet: Quantity: 1x3 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 19 11 18 ITEM NO PART NUMBER 10 MCM00-09 20 22 21 13 80 480 32 A 31 36 49 49 49 49 49 49 49 36 MCM00-10 SCREW SHAFT MISUMI YA-VA MISUMI 4 JIS B 1177 Flat point M5 x 6-N 19 JIS B 1256 Finished circular 10 20 JIS B 1256 Finished circular JIS B 1180 Continuous thread 21 hexagon head bolt A M10 x 25-N JIS B 1180 Continuous thread 22 hexagon head bolt A M6 x 20-N 4 8 115 COLLAR COLLAR SCREW SHAFT SHAFT PLATE KESS6-20 / Key / MISUMI FLU204-PBT-C1 / YA-VA SSP40B13-S-20 / MISUMI JIS B 1252 1L JIS B 1251 No.2 JIS B 1251 No.2 10 JIS B 1251 No.2 JIS B 1183 Domed cap nut Type M5 -N 12 14 ROLLING PLATE ROLLING PLATE ROLLING PLATE 3 4 1 13 14 15 16 18 15 QTY MCM00-11 17 MANUFACTURER 12 17 10 MCM00-01 MCM00-02 (00) MCM00-02 (30) MCM00-03 (60) MCM00-04 MCM00-05 MCM00-06 MCM00-07 MCM00-08 11 16 NAME COLLAR B C B C R45 A P9 6h9 SECTION A-A P9 6h9 GRADUATION THESIS Name Js9 6h9 SECTION B-B SCALE : Js9 6h9 SECTION C-C SCALE : Advisor Đ QUANG KHOA Check Đ QUANG KHOA Design TO.Q.KHANH Sign Date BLOCK ROLLING UNIT MCM00 Scale: 1:3 Mass: 5.58 Kg Sheet: Quantity: Ho Chi Minh City University Of Technology And Education 12.5 ( 6.3 ) 2-M5THRU ALL 10 20±0.1 6.3 6.3 o 0.5x45 Ø40±0.125 o 1x45 32 16±0.035 6±0.02 10±0.05 3.2 Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer 6.3 Ø22+0.02 6.3 6.3 2.8+0.04 2-Ø5+0.1 -0.05 DRILL GRADUATION THESIS Name Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design TO.Q KHANH Sign Date COLLAR 01 MCM00-01 Scale: 1:1 Mass: 0.14 Kg Sheet: Quantity: 3x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 6.3 Ø40±0.05 2-Ø5+0.1 +0.05 13±0.1 16±0.035 16 Ø22+0.1 0.5x45o 0.5x45o GRADUATION THESIS Name Note: VENDOR / MATERIAL: POM Acetal Copolymer (White) Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design TO.Q KHANH Sign Date COLLAR 05 MCM00-05 Scale: 1:1 Mass: 0.02 Kg Sheet: Quantity: 4x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 6.3 Ø40 2-Ø5+0.1 +0.05 46±0.125 0.5x45o 16±0.035 16 Ø22+0.1 0.5x45o GRADUATION THESIS Name Note: VENDOR / MATERIAL: POM Acetal Copolymer (White) Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design TO.Q KHANH Sign Date COLLAR 06 MCM00-06 Scale: 1:1 Mass: 0.06 Kg Sheet: Quantity: 6x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 80 64±0.06 6.3 12.5±0.03 90 57±0.06 57.5±0.06 18±0.04 11±0.03 ( ) 6.3 Ø22+0.02 18 115 12.5 6.3 8±0.03 10±0.07 4-7±0.03 2-M10 2x45o GRADUATION THESIS 40±0.05 Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check ĐQ.UANGKHOA Design TO.Q KHANH Sign Date PLATE 09 MCM00-09 Scale: 1:1 Mass: 0.64 Kg Sheet: Quantity: 2x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 9-R2 90° Ø100±0.175 Ø5,5+0.1 -0.05 16±0.1 Ø22+0.02 16 9-R3 CON IGURATION 00 DI ERENT LOCATION 5,5 18.23±0.1 GRADUATION THESIS 3±0.05 Name Note: VENDOR / MATERIAL: AISI 304 Advisor Đ.QUANGKHOA Chamfer : Edge Lighting Chamfer Check ĐQ.UANGKHOA LASER CUTTING Design TO.Q.KHANH Sign Date Scale: 1:1 Mass: 0.08 Kg ROLLING PLATE 02 Sheet: Quantity: 3x2 MCM00-02 HoChiMnihCtiyUnvierstiy OfTechnologyAndEducatoin 00 R 5,500 05 00 0 , 30 R3 CONFIGURATION 30 DIFFERENT LOCATION 5,5 GRADUATION T E I 05 ENDOR ATERIAL AI I 30 C E L C LA ER CUTTING A UANG OA C UANG OA D TO D N N ROLLING LATE 03 AN C 00 03 C OT CU AE 00 90° 9-R2 18.23±0.1 60° 5.5+0.1 -0.05 16±0.1 22+0.02 9-R3 100±0.175 CONFIGURATION 60 DFI FERENTLOCATO I N55 GRADUATION THESIS 3±0.05 Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer LASER CUTTING Name Advisor Q Đ U.ANGKHOA Sign Date Scale: 1:1 Mass: 0.08 Kg ROLLING PLATE 04 Sheet: Quantity: 3x2 Check Đ QU.ANGKHOA Design TO.Q.KHANH MCM00-04 HoChM inihCtyiUnvierstyi OfTechnolgyAndEducaotin ( ) 12.5 12.5 12.5 434 20±0.1 20±0.1 5±0.07 1x45o 2-M5 GRADUATION THESIS Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check Đ Q.UANGKHOA Design TO.Q.KHANH Sign Date SCREW SHAFT 07 MCM00-07 Scale: 3:1 Mass: 0.14 Kg Sheet: Quantity: 2x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin 12.5 10 546 10 ( 3.2 ) A 32±0.125 12.5 87±0.07 14 14 12.5 182±0.1 14 182±0.1 91±0.07 605 90±0.07 188±0.1 188±0.1 14±0.035 8±0.075 C B C B 587 8±0.075 6-0.012 -0.042 6-0.012 -0.042 SECTION B-B SCALE : 6.3 6.3 +0.05 6.3 3.5 6.3 6.3 3.5+0.05 3.2 DETAIL A SCALE : Ø22+0.05 0 Ø18-0.05 6.3 1x45o SECTION C-C SCALE : APPLY FOR POSITION GRADUATION THESIS Name Note: VENDOR / MATERIAL: AISI 304 Chamfer : Edge Lighting Chamfer Advisor ĐQ.UANGKHOA Check Đ Q.UANGKHOA Design T NHAT HOANG Sign Date SHAFT 08 MCM00-08 Scale: 1:2 Mass: 1.50 kg Sheet: Quantity: 1x2 HoChiMnihCtyi Unvierstyi OfTechnoolgyAndEducaotin S K L 0