What makes Total Quality Management work A study of obstacles and outcomes
WHAT MAKES TOTAL QUALITY MANAGEMENT WORK: A STUDY OF OBSTACLES AND OUTCOMES by Deborah A Hill JEAN GORDON, Ph.D., Faculty Mentor and Chair JOHN KLOCINSKI, Ph.D., Committee Member WARREN MCDONALD, Ph.D., Committee Member Kurt Linberg, Ph.D., Dean, School of Business & Technology A Dissertation Presented in Partial Fulfillment Of the Requirements for the Degree Doctor of Philosophy Capella University April 2008 UMI Number: 3303697 UMI Microform 3303697 Copyright 2008 by ProQuest Information and Learning Company All rights reserved This microform edition is protected against unauthorized copying under Title 17, United States Code ProQuest Information and Learning Company 300 North Zeeb Road P.O Box 1346 Ann Arbor, MI 48106-1346 Abstract Data was gathered from a section survey of ASQ members to determine the obstacles associated with managing a successful quality transformation The five most significant barriers to TQM were: (a) management’s compensation was not tied to achieving quality goals, (b) employees are not trained in quality improvement skills, (c) there are not adequate resources to effectively employ total quality management, (d) employees are resistant to change, and (e) employees are not trained in problem identification and problem solving techniques Factor analysis on the ratings of the twenty-one barriers to TQM revealed three underlying constructs: (a) lack of planning for quality, (b) lack of training on quality, and (c) lack of leadership for quality These obstacles were found to be significantly related to specific potential outcomes that can be used to measure TQM success (or failure) The potential outcomes include frequent turnover of employees, frequent turnover of management, the cost/benefit ratio of implementing TQM, and quality improvement results rarely meet expectations This provides a useful way to evaluate the significance of obstacles to TQM success, and therefore, provides guidance and direction for developing strategies for an effective quality transformation ii Table of Contents List of Tables vi List of Figures vii CHAPTER INTRODUCTION Introduction to the Problem Background of the Study Statement of the Problem Purpose of the Study Research Questions Significance of the Study Definition of Terms Assumptions and Limitations Nature of the Study, or Theoretical/Conceptual Framework Organization of the Remainder of the Study CHAPTER LITERATURE REVIEW TQM Defined History of TQM Obstacles to TQM 32 Benefits of TQM 40 How Can TQM Work? 46 CHAPTER METHODOLOGY 56 iii Population 56 Research Design 57 Sample 61 Instrumentation/Measures 62 Data Collection 63 Data Analysis 63 Validity 64 Reliability 64 Ethical Considerations 65 CHAPTER RESULTS 66 Summary of Research Design and Methodology 66 Characteristics of Respondents 66 Definitions of Quality 68 Product Quality Dimensions 71 Service Quality Dimensions 76 Research Questions 82 Obstacles to TQM Success 82 Correlations of Obstacles with Outcomes 97 CHAPTER DISCUSSION AND CONCLUSIONS 103 Findings and Interpretations 104 Recommendations 112 Suggestions for Future Research 114 Summary and Conclusion 115 iv REFERENCES 117 APPENDIX SURVEY QUESTIONS 125 v List of Tables Table Eigenvalues and the Total and Cumulative Variance for Each Extracted Factor97 Table Results From the Regression Analyses 100 vi List of Figures Figure Size of Organization 67 Figure Type of Organization 67 Figure Quality Defined as Innate Excellence 68 Figure Quality Defined as a Measured Characteristic 69 Figure Quality Defined by Intended Use 70 Figure Quality Defined as Conformance to Standards 70 Figure Quality Defined as Performance at an Acceptable Price 71 Figure Product Quality Dimension-Aesthetics 72 Figure Product Quality Dimension-Conformance 73 Figure 10 Product Quality Dimension-Durability 73 Figure 11 Product Quality Dimension-Features 74 Figure 12 Product Quality Dimension-Perceived Quality 74 Figure 13 Product Quality Dimension-Performance 75 Figure 14 Product Quality Dimension-Reliability 75 Figure 15 Product Quality Dimension-Serviceability 76 Figure 16 Service Quality Dimension-Reliability 77 Figure 17 Service Quality Dimension-Responsiveness 78 Figure 18 Service Quality Dimension-Competence 78 Figure 19 Service Quality Dimension-Access 79 Figure 20 Service Quality Dimension-Courtesy 79 Figure 21 Service Quality Dimension-Communication 80 Figure 22 Service Quality Dimension-Credibility 80 vii Figure 23 Service Quality Dimension-Security 81 Figure 24 Service Quality Dimension-Knowing the Customer 81 Figure 25 Service Quality Dimension-Tangibles 82 Figure 26 Statement 1-Strategic Plans not Include Quality Goals 84 Figure 27 Statement 2-The Best Practices and/or Products of Other Companies are NOT Benchmarked 85 Figure 28 Statement 3-There are Excess Layers of Management 85 Figure 29 Statement 4-Quality is Treated as a Separate Initiative 86 Figure 30 Statement 5-Quality is not Everyone’s Responsibility 86 Figure 31 Statement 6-Employees are NOT Trained in Problem Identification and Problem Solving Techniques 87 Figure 32 Statement 7-There is no Joint Planning with Suppliers 87 Figure 33 Statement 8-Quality is not Effectively Measured 88 Figure 34 Statement 9-Quality is NOT Defined by the Customer 88 Figure 35 Statement 10-Employees are not Trained in Group Discussion and Communication Techniques 89 Figure 36 Statement 11-Quality Action Plans are Often Vague 89 Figure 37 Statement 12-The Strategic Plan is NOT Customer Driven 90 Figure 38 Statement 13-Employees are NOT Empowered to Implement Quality Improvement Efforts 90 Figure 39 Statement 14-There are Inadequate Resources to Effectively Employ Total Quality Management 91 Figure 40 Statement 15-Cross-Functional Teams are not Employed 91 Figure 41 Statement 16-Employees and/or Teams are NOT Recognized for Achievements in Quality Improvement 92 Figure 42 Statement 17-Employees are NOT Trained in Quality Improvement 92 viii Figure 43 Statement 18-Top Management is NOT Visibly and Explicitly Committed to Quality 93 Figure 44 Statement 19-Quality Improvement Efforts Rarely Meet Expectations in Terms of desired results 93 Figure 45 Statement 20-Management’s Compensation is NOT Linked to Achieving Quality Goals 94 Figure 46 Statement 21-There is Frequent Turnover of Employees 94 Figure 47 Statement 22-Time Constraints Prohibit Effective Total Quality Management Implementation 95 Figure 48 Statement 23-Employees are Resistant to Change 95 Figure 49 Statement 24-The High Costs of Implementing Total Quality Management Outweigh the Benefits 96 Figure 50 Statement 25-There is Frequent Turnover of Management 96 Figure 51 Scree Plot for the Principal Components Analysis 98 ix In this study it was very difficult to get responses from the survey by including it in a newsletter It is highly recommended that a survey be sent out separately and by itself in order to get more responses Also, it is recommended to have some kind of reward or prize for those that complete the survey Summary and Conclusion This study showed the main obstacles to TQM and how they relate to specific outcomes This study showed the most significant obstacle is not tying management’s compensation to achieving quality goals The second most significant barrier to TQM was that employees are not trained in quality improvement skills The third most significant barrier was that there are not adequate resources to effectively employ total quality management The fourth most significant barrier was that employees are resistant to change The fifth most significant barrier was that employees are not trained in problem identification and problem solving techniques When the twenty-one obstacles were correlated with potential outcomes, three underlying constructs resulted: lack of planning for quality, lack of training on quality, and lack of leadership for quality Then regression analysis was performed on the four undesirable outcomes of TQM (frequent turnover of employees, frequent turnover of management, high cost of implementing TQM outweighs the benefits, and quality improvement efforts rarely meet expectations) and it was found that lack of planning and lack of leadership were significant for all four undesirable outcomes Lack of training was significant for the frequent turnover of employees 115 This study is very beneficial for those involved in implementing or maintaining an effective TQM system It can help those involved in TQM realize what potential obstacles can occur and what the underlying constructs or reasons can be This study also leads to further research in that the five most prevalent obstacles could be hypotheses in future studies They could each be tested to see if they are the same obstacles for other areas, groups, or organizations Managers need to realize that when implementing a TQM program the expected results not occur overnight; it may take years before an organization realizes benefits However, if there is proper planning, training, and leadership for quality, then the negative potential outcomes can be avoided However, the entire organization must be involved Also, customers are requiring more and more quality, and if they not receive it, they will go elsewhere It is important to remember that “if you fail to plan, you plan to fail.” 116 REFERENCES Abas, Z & Yaacob, Z (2006) Exploring the relationship between total quality management (TQM), strategic control systems (SCS), and organizational performance (OP) using a SEM framework Journal of American Academy of Business, Cambridge, 9(2), 161-166 Agus, A., & Sagir, R M (2001) The structural relationships between total quality management, competitive advantage, and bottom line financial performance: An empirical study of Malaysian manufacturing companies Total Quality Management, 12, 1018-1024 Amar, K., & Zain, Z M (2002) Barriers to implementing TQM in Indonesian manufacturing organizations TQM Magazine, 14, 367-372 Antony, J., Foutris, F., Banuelas, R., & Thomas, A (2004) Using six sigma Manufacturing Engineer, 83(1), 10-12 Antony, J., Somasundarum, V., Fergusson, C., & Blecharz, P (2004) Applications of Taguchi approach to statistical design of experiments in Czech Republican industries International Journal of Productivity and Performance Management, 53, 447-457 Arbnor, I., & Bjerke, B (1997) Methodology for creating business knowledge (2nd ed.) Thousand Oaks, CA: Sage Baxter, L F & Hirschhauser, C (2004) Reification and representation in the implementation of quality improvement programs International Journal of Operations & Production Management, 24, 207-224 Beer, M (2003) Why total quality management programs not persist: The role of management quality and implications for leading a TQM transformation Decision Sciences, 34, 623-642 Bergquist, B., Fredriksson, M., & Svensson, M (2005) TQM: Terrific quality marvel or tragic quality malpractice? TQM Magazine, 17, 309-321 Bertrand, J W., & Fransoo, J C (2002) Operations management research methodologies using quantitative modeling International Journal of Operations & Production Management, 22, 241-264 Bullington, S F., Easley, J Y., Greenwood, A G., & Bullington, K E (2002) Success factors in initiating versus maintaining a quality improvement process Engineering Management Journal, 14(3), 8-14 117 Chen, J., & Tsou, J (2003) An optimal design for process quality improvement: Modeling and application Production Planning & Control, 14, 603-612 Chin, K-S & Pun, K-F (2002) A proposed framework for implementing TQM in Chinese organizations International Journal of Quality & Reliability Management, 19, 272-294 Claver, E., Gasco, J L, Llopis, J., & Gonzalez, R (2001) The strategic process of a cultural change to implement total quality management: A case study Total Quality Management, 12, 469-482 Cooper, D R., & Schindler, P S (2003) Business research methods (8th ed.) Boston: McGraw-Hill Irwin Corbett, C J., Montes-Sancho, M J., & Kirsch, D A (2005) The financial impact of ISO 9000 certification in the United States: An empirical analysis Management Science, 51, 1046-1059 Coronado, R B & Antony, J (2002) Critical success factors for the successful implementation of six sigma projects in organizations TQM Magazine, 14(2), 9299 Crosby, P B (1979) Quality is free: The art of making quality certain New York: McGraw-Hill Crosby, P B (1984) Quality without tears: The art of hassle-free management New York: McGraw-Hill Crosby, P B (1989) Let's talk quality: 96 questions you always wanted to ask Phil Crosby New York: McGraw-Hill Crosby, P B (2000) Creating a useful and reliable organization: The quality professional's role Quality Congress ASQ's Annual Quality Congress Proceedings, 720-722 Daigleish, S (2006) Taking the quality high ground Quality, 45(2), 18 Davies, E.C (2003) Quality: Its historical context Engineering Management, 13(2), 1417 de Mast, J (2004) A methodological comparison of three strategies for quality improvement International Journal of Quality & Reliability Management, 21, 198-213 118 Deming, W E (1952) Statistical techniques and international trade Journal of Marketing, 17(1), 428-433) Deming, W E (1981) Improvement of quality and productivity through action by management National Productivity Review, 1(1), 12-22 Deming, W E (1985) Transformation of western style of management Interfaces, 15(3), 6-11 Deming, W E (1986) Out of the crisis Cambridge: Massachusetts Institute of Technology, Center for Advanced Engineering Study Deming, W E (1987) Transformation of today’s management Executive Excellence, 4(12), Deming, W E (1988) Quality and the required style of management Journal for Quality and Participation Retrieved October 8, 2006, from http://deming.eng.clemson.edu/pub/ den/files/reqstyle.txt Deming, W E (1993) Leading quality transformations Executive Excellence, 10(5), Deming, W E (1994) Leadership for quality Executive Excellence, 11(6), 3-5 Destefani, J (2005) Masters of manufacturing: Joseph M Juran Manufacturing Engineering, 135(1), 51-62 Faul, F., & Erdfelder, E (1992) GPOWER: A priori, post-hoc, and compromise power analyses for MS-DOS [Computer program] Bonn FRG: Bonn University, Department of Psychology Retrieved October 20, 2006, from http://www.psycho.uniduesseldorf.de/aap/projects/gpower Feigenbaum, A V (1983) Total quality control New York: McGraw-Hill Feigenbaum, A V & Feigenbaum, D S (2005) What quality means today MIT Sloan Management Review, 46(2), 95-97 Fisher, C M., Barfield, J., Li, J., & Mehta, R (2005) Retesting a model of the Deming management method Total Quality Management, 16, 401, 412 Ghobadian, A., & Gallear, D (2001) TQM implementation: An empirical examination and proposed generic model Omega, 29, 343-359 Goldman, H H (2005) Origins and development of quality initiatives in American business TQM Magazine, 17, 217-225 119 Grover, S., Agrawal, V P., & Khan, I A (2004) A digraph approach to TQM evaluation of an industry International Journal of Production Research, 42, 4031-4053 Hendricks, K B., & Singhal, V R (2001) Long-run stock price performance of firms with effective TQM programs Management Science, 47, 359-368 Hoyer, R W & Hoyer, B B (2001) What is quality? Quality Progress, 34(7), 52-62 Ishikawa, K (1985) What is total quality control? The Japanese way Englewood Cliffs, NJ: Prentice-Hall Jun, M., Cai, S., & Peterson, R T (2004) Obstacles to TQM implementation in Mexico’s maquiladora industry Total Quality Management, 15(1), 59-72 Juran Institute (2005) Retrieved October 8, 2006, from http://www.juran.com/brand/ cfm?target=&article_id=32 Juran, J M (1992) Departmental quality planning National Productivity Review, 11(3), 287-300 Juran, J M (1993) Why quality initiatives fail Journal of Business Strategy, 14(4), 3538 Juran, J M (2001) Juran's Quality Handbook, 5e Blacklick, OH: McGraw-Hill Professional Book Group Juran, J M (2002) A call to action: The summit Measuring Business Excellence, 6(3), 4-8 Kartha, C P (2002) Application of Taguchi methods for process improvement for tubular exhaust manifolds Journal of American Academy of Business, Cambridge, 2(1), 118-122 Kartha, C P (2004) A comparison of ISO 9000: 2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria TQM Magazine, 16, 331-340 Kaynak, H (2003) The relationship between total quality management practices and their effects on firm performance Journal of Operations Management, 21, 405435 Klefsjo, B., Wiklund, H., & Edgeman, R L (2001) Six sigma seen as methodology for total quality management Measuring Business Excellence, 5(1), 31-36 120 Kocakoc, I D., & Sen, A (2006) Utilizing surveys for finding improvement areas for customer satisfaction along the supply chain International Journal of Market Research, 48, 623-636 Kontoghiorghes, C., & Gudgel, R (2004) Investigating the association between productivity and quality performance in two manufacturing settings Quality Management Journal, 11(2), 8-20 Kruger, V (2001) Main schools of TQM: “The big five” TQM Magazine, 13, 146-155) Kujala, J., & Lillrank, P (2004) Total quality management as a cultural phenomenon Quality Management Journal, 11(4), 43-55 Kwak, Y H., & Anbari, F T (2006) Benefits, obstacles, and future of six sigma approach Technovation, 26, 708-715 Leonard, D., & McAdam, R (2001a) Grounded theory methodology and practitioner reflexivity in TQM research International Journal of Quality and Reliability, 18, 180-194 Leonard, D., & McAdam, R (2001b) Relationship between total quality management (TQM) and corporate strategy: The strategic impact of TQM Strategic Change, 10, 439-448 Leonard, D., & McAdam, R (2003) An evaluative framework for TQM dynamics in organizations International Journal of Operations & Production Management, 23, 652-677 Leonard, D., McAdam, R., & Reid, R (2002) A grounded multi-model framework for TQM dynamics International Journal of Quality & Reliability Management, 19, 710-736 Litwin, M S (1995) How to measure survey reliability and validity Thousand Oaks, CA: Sage Ljungstrom, M., & Klefsjo, B (2002) Implementation obstacles for a workdevelopment-oriented TQM strategy Total Quality Management, 13, 621-634 Maghsoodloo, S., Ozdemir, G., Jordan, V., & Huang, C (2004) Strengths and limitations of Taguchi's contribution to quality, manufacturing, and process engineering Journal of Manufacturing Systems, 23(2), 73-126 Matthews, M L (2001) How to implement feedback & drive improvement Quality Congress ASQ's Annual Quality Congress Proceedings, 294-299 121 McDonald, I., Zairi, M., & Idris, M.A (2002) Sustaining and transferring excellence Measuring Business Excellence, 6(3), 20-30 Mohrman, S A., Gibson, C B, & Mohrman, A M (2001) Doing research that is useful to practice: A model and empirical exploration Academy of Management Journal, 44, 357-375 Motwani, J (2001) Measuring critical factors of TQM Measuring Business Excellence, 5(2), 27-30 Neureuther, B D., & Kenyon, G N (2004) Quality improvement under budgetary and life-cycle constraints Quality Management Journal, 11(2), 21-32 Nunnally, J (1978) Psychometric theory New York: McGraw-Hill Nwabueze, U (2001) An industry betrayed: The case of total quality management in manufacturing TQM Magazine, 13, 400-408 Padhi, N (2006) Retrieved September 16, 2006, from http://www.isixsigma.com/library/ content/c021230a.asp Phillips-Donaldson, D (2004) 100 years of Juran Quality Progress, 37(5), 25-31 Powell, S (2001) Spotlight on Armand Feigenbaum Measuring Business Excellence, 5(2), 45-48 Prajogo, D I (2005) The comparative analysis of TQM practices and quality performance between manufacturing and service firms International Journal of Service Industry Management, 16, 217-228 Prajogo, D I., & Brown, A (2004) The relationship between TQM practices and quality performance and the role of formal TQM programs: An Australian empirical study Quality Management Journal, 11(4), 31-42 Prajogo, D I., & Sohal, A S (2003) The relationship between TQM practices, quality performance, and innovation performance International Journal of Quality & Reliability, 20, 901-918 Proposing a framework for your TQM program (2002) Measuring Business Excellence, 6(3), 58-61 Rao, M P., Youssef, M A., & Stratton, C J (2004) Can TQM lift a sinking ship? A case study Total Quality Management, 15, 161-171 122 Rahman, S (2004) The future of TQM is past Can TQM be resurrected? Total Quality Management, 15, 411-422 Reis, D., & Pena, L (2001) Reengineering the motivation to work Management Decision, 39, 666-675 Robson, C (2002) Real world research: A resource for social scientists and practitioner-researchers (2nd ed.) Malden, MA: Blackwell Sadikoglu, E (2004) Total quality management: Context and performance Journal of American Academy of Business, Cambridge, 5, 364-366 Sakakibara, S., Flynn, B B., & Schroeder, R G (1993) A framework and measurement instrument for just-in-time manufacturing Production and Operations Management, 2(3), 177-194 Scandura, T A., & Williams, E A (2000) Research methodology in management: Current practices, trends, and implications for future research Academy of Management Journal, 43, 1248-1264 Sebastianelli, R., & Tamimi, N (2003) Understanding the obstacles to TQM success Quality Management Journal, 10(3), 45-56 Senapati, N R (2004) Six sigma: Myths and realities International Journal of Quality & Reliability Management, 21, 683-690 Shewhart, W A (1931) Economic control of quality of manufactured product New York: Van Nostrand Sila, I., & Ebrahimpour, M (2002) An investigation of the total quality management survey based research published between 1989 and 2000 International Journal of Quality & Reliability Management, 19, 902-970 SkyMark Corporation (2006) Retrieved December 10, 2006 from http://www.skymark.com Soltani, E., Lai, P., & Gharneh, N S (2005) Breaking through barriers to TQM effectiveness: Lack of commitment of upper-level management Total Quality Management, 16, 1009-1021 Tari, J J (2005) Components of successful total quality management TQM Magazine, 17, 182-194 Taylor, W A., & Wright, G H (2003a) Impact of senior managers’ commitment on the success of TQM programs International Journal of Manpower, 24, 535-550 123 Taylor, W A & Wright, G H (2003b) A longitudinal study of TQM implementation: Factors influencing success and failure Omega, 31(2), 97-111 Temtime, Z., & Solomon, G H (2002) Total quality management and the planning behavior of SMEs in developing economies TQM Magazine, 14, 181-191 Tena, A B E., Llusar, J C B., & Puig, V.R (2001) Measuring the relationship between total quality management and sustainable competitive advantage: A resourcebased view Total Quality Management, 12, 932-938 TQM: A snapshot of the experts (2002) Measuring Business Excellence, 6(3), 54-57 Ugboro, I O & Obeng, K (2000) Top management leadership, employee empowerment, job satisfaction, and customer satisfaction in TQM organizations: An empirical study Journal of Quality Management, 5, 247-272 Warwood, S & Antony, J (2003) A simple, semi-prescriptive self-assessment model for TQM Quality Assurance, 10(2), 67-81 Wikimedia Foundation (2006) Retrieved December 20, 2006, from http://www.c2.com/ cgiwiki?FishboneDiagram Wiele, T V., Iwaarden, J V., Dale, B G., & Williams, R (2006) A comparison of five modern improvement approaches International Journal of Productivity and Quality Management, 1, 363-378 Williams, R., Wiele, T., Iwaarden, J., & Visser, R (2004) TQM: Why it will again become a top management issue International Journal of Quality & Reliability Management, 21, 603-611 Wilson, J P., Walsh, M T., & Needy, K L (2003) An examination of the economic benefits of ISO 9000 and the Baldrige Award to manufacturing firms Engineering Management Journal, 15(4), 3-10 Zairi, M (2002) Beyond TQM implementation: The new paradigm of TQM sustainability Total Quality Management, 13, 1161-1172 124 I APPENDIX SURVEY QUESTIONS Background information Your job title: Size of your organization: Less than 50 employees 50 to 90 employees 100 to 499 employees 500 to 999 employees More than 1,000 employees Your organization is primarily involved in (choose one): Manufacturing Service What type of product or service is provided by your organization? Is your organization involved in Total Quality Management? Yes No If yes, for how many years has your organization been involved? II Rate how closely each of the following definitions of quality matches that of your organization Not at all Somewhat Exactly Quality is innate excellence Quality is reflected by the level of some measurable product/service attribute Quality is realized when customer satisfaction is maximized because the product/service fits its intended use Quality is conformance to specification 5 Quality is performance at an acceptable price 125 III If your division is primarily involved in MANUFACTURING, complete PART A only If your division is primarily involved in SERVICE, skip PART A and complete PART B only PART A Rate how important each of the following product quality dimensions is to your organization's competitive strategy not minor somewhat important very important importance important important Aesthetics Conformance Durability Features 5 Perceived Quality Performance Reliability Serviceability PART B Rate how important each of the following service quality dimensions is to your organization's competitive strategy not minor somewhat important very important importance important important Reliability Responsiveness Competence Access 5 Courtesy Communication Credibility Security Knowing the Customer 10 Tangibles 126 IV Please indicate the extent to which each of the following statements is true about your organization not at all slightly somewhat mostly completely true true true true true Strategic plans not include quality goals The best practices and/or products of other companies are benchmarked 5 5 There are excess layers of management Quality is treated as a separate initiative Quality is not everyone's responsibility Employees are trained in problem identification and problem solving techniques 5 5 There is no joint planning with suppliers Quality is not effectively measured Quality is defined by the customer 10 Employees are not trained in group discussion and communication techniques 127 11 Quality action plans are often vague 5 12 The strategic plan is customer driven 13 Employees are empowered to implement quality improvement efforts 14 There are adequate resources to effectively employ total quality management 5 15 Cross-functional teams are not employed 16 Employees and/or teams are recognized for achievements in quality improvement 17 Employees are trained in quality improvement skills 18 Top management is visibly and explicitly committed to quality 19 Quality improvement efforts rarely meet expectations in terms of desired results 20 Management's compensation is linked to achieving quality goals 21 There is frequent turnover of employees 22 Time constraints prohibit effective total quality management implementation 128 5 23 Employees are resistant to change 24 The high costs of implementing total quality management outweigh the benefits 25 There is frequent turnover of management 129 ... and product quality Malcolm Baldrige National Quality Award (MBNQA) This award is administered by ASQ and is presented annually to organizations that demonstrate quality and performance excellence... and the Malcolm Baldrige National Quality Award (MBNQA) TQM is often thought of as either a terrific quality marvel or tragic quality malpractice It depends on several factors, such as to what. .. operational levels rather than adopting Strategic Total Quality Management 36 Another obstacle to TQM is change and resistance to change Too often, management ignores human resistance issues and