Microsoft Word C037858e doc ICS 59 100 01 Ref No ISO 2113 1996/Cor 1 2003(E) © ISO 2003 – All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 2113 1996 TECHNICAL CORRIGENDUM 1 Publ[.]
INTERNATIONAL STANDARD ISO 2113:1996 TECHNICAL CORRIGENDUM Published 2003-02-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION Reinforcement fibres — Woven fabrics — Basis for a specification TECHNICAL CORRIGENDUM Renforts — Tissus — Base de spécification RECTIFICATIF TECHNIQUE Technical Corrigendum to ISO 2113:1996 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13, Composites and reinforcement fibres Page 1, Clause Delete the reference to ISO 10548 In addition, update the other normative references as follows: ISO 291: Insert the year of publication (1997) and delete footnote 1) ISO 1886: Replace by ISO 2859-1:1999, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection, and ISO 3951:1989, Sampling procedures and charts for inspection by variables for percent nonconforming ISO 4602: Insert the year of publication (1997) and delete footnote 2) ISO 4605:1978: Replace by ISO 3374:2000, Reinforcement products — Mats and fabrics — Determination of mass per unit area ISO 5025:1978: Replace by ISO 5025:1997, Reinforcement products — Woven fabrics — Determination of width and length ICS 59.100.01 © ISO 2003 – All rights reserved Published in Switzerland Ref No ISO 2113:1996/Cor.1:2003(E) ISO 2113:1996/Cor.1:2003(E) Page 2, Definition 3.5 Add the following note: “NOTE The term is also used with reference to the type of weave.” Page 2, Clause Replace “ISO 1886” by “ISO 2859-1 and ISO 3951” Page 3, Subclause 7.2.2.1 Replace “ISO 4605” by “ISO 3374” Page 3, Subclause 7.2.3.2 Replace “ISO 10548” by “a suitable method” © ISO 2003 – All rights reserved