[...]... discussed in Chapter 9 As explained in Chapter 10, biological wastewater treatment modelling has become and important tool in process engineering There are state of the art activated sludge models (ASMs) available, which have found wide application in the engineering community Biofilm models have found less application in engineering practice so far, and a gap has developed between biofilm research and engineering. .. at the beginning of anoxic stages and NO3 N concentration at the beginning of anaerobic stages were studied Results showed that SRT and HRT were main factors accounting for PAO deactivation occurrence in the parallel AN/AO process while DOC concentration at the beginning of anoxic stages and NO3 N concentration at the beginning of anaerobic stages were main factors influencing PAO activity in the anaerobic-anoxic... mechanical stability and biocompatibility In Chapter 8 we describe the effectiveness of using a jetting Preface xi process involving the formation of a stretched thin jet of aqueous polymer solution and its subsequent breakup into droplets in a co-flowing water-immiscible liquid for obtaining droplets of about 100 μm in diameter The droplet production process and the processes for obtaining gelated microcapsules... the change in food price and supply chain Therefore, to establish an integral infrastructure of combining energy, economics, environment and agriculture becomes a major issue for the biodiesel application 1 Introduction Improving energy security, decreasing vehicle contribution to air pollution and achieving reduction or even eliminating greenhouse gas (GHG) emissions are primary goals compelling governments... In: Biochemical Engineering Editors: F.E Dumont and J.A Sacco, pp 1-40 ISBN: 978-1-60741-257-1 © 2009 Nova Science Publishers, Inc Chapter 1 A REVIEW OF BIODIESEL AS RENEWABLE ENERGY John Chi-Wei Lan1, Amy Tsui2, Shaw S Wang1,2 and Ho-Shing Wu1 1 Department of Chemical Engineering and Materials Science, Yuan Ze University, ChungLi, Taiwan 2 Departement of Chemical and Biochemical Engineering, Rutgers... Dialysis and adsorption units are commonly used in liver support devices for the removal of albumin-bound toxins such as bilirubin In Chapter 15, an engineering approach to the analysis of a liver support device implementing these units is presented Starting from the physico-chemical description of the basic phenomena involved in the detoxification process, a mathematical model of a recirculating albumin... sludge reduction and particularly on addressing the mechanisms behind it Meanwhile, potential interactions and genetic behaviors of microbes under uncoupled growth conditions, and some advanced microbiological tools are also discussed A large amount of raw material is processed with the demand of fishery products Membrane technology and bioprocessing have increasingly involved in the fishery industry, particularly... rejuvenation occurred in both configurations shortly after main influencing factors were reset to right values: PAO was rejuvenated by adjusting SRT and HRT to 15d and 9h respectively for the parallel AN/AO process; by controlling DOC at the beginning of anoxic stages and NO3 N concentration at the beginning of anaerobic stages lower than 3 mgL-1 and 2.3 mgL1 respectively could rejuvenate PAO in anaerobic-anoxic... in the areas of solid phase extraction, catalysis, medicine, clinical analysis, drug delivery, environmental monitoring, and sensors In Chapter 4, the authors discuss the challenges associated with the imprinting of peptides and proteins, and provide an overview of the significant progress achieved within this field This review offers a comparative analysis of different approaches developed, focusing... thermal and peroxidase-catalyzed gelation process are also described In addition, we introduce the production of cell-enclosing hydrogel fibers using the same device developed for the production of cell-enclosing microcapsules Wastewater treatment systems must be operated under hydrodynamic conditions that allow maintaining the biomass in suspension and promoting intimate contact between substrates and . Biochemical Engineering Fabian E. Dumont and Jack A. Sacco 2009. ISBN: 978-1-60741-257-1 BIOTECHNOLOGY IN AGRICULTURE, INDUSTRY AND MEDICINE SERIES BIOCHEMICAL ENGINEERING . h0" alt="" BIOTECHNOLOGY IN AGRICULTURE, INDUSTRY AND MEDICINE SERIES BIOCHEMICAL ENGINEERING No part of this digital document may be reproduced, stored in a retrieval. application in engineering practice so far, and a gap has developed between biofilm research and engineering practice in the biofilm modelling community. In this context biofilm and floc structure