Thông tin tài liệu
SAER ELETTROPOMPE S.p.A.
Via Circonvallazione, 22
• 42016 Guastalla (RE) Italy
Tel. 0522.83.09.41 r. a.
• Fax 0522.82.69.48
e-mail: info@saerelettropompe.com - http://www.saerelettropompe.com
®
n° 206 - 10/2005
• La ditta si riserva la facoltà di modificare senza preavviso i dati riportati in questo catalogo.
• Saer can alter without notifications the data mentioned in this catalogue.
• Saer se reserva el derecho de modificar los datos indicados en este catalogo sin previo aviso.
• Saer se réserve le droit de modifier sans préavis les données techniques dans ce catalogue.
• Die Firma hat die Moeglichkeit, plötzlich die Daten, in diesem Katalog enthalten, zu aendern.
• Saer reserva o direito de modificar os dados indicados neste catálogo sem aviso prévio.
Quality System Certified
ISO 9001: 2000
Prestazioni e tolleranze secondo UNI EN ISO 9906 - Appendice A
Performances and tolerances according to UNI EN ISO 9906 - Attachment A
Prestaciones y tolerancias de acuerdo con UNI EN ISO 9906 - Parrafo A
Performances et tolérances conformes aux normes UNI EN ISO 9906 - Annexe A
Leistungen und Abweichungen gemäß UNI EN ISO 9906 - Anhang A
Datos de rendiçao e tolerâncias de acordo com UNI EN ISO 9906 - Parágrafo A
®
elettropompe centrifughe
normalizzate EN733
NCB
MG
IR
SAER ELETTROPOMPE O.P.A.
Via Circonvallazione 22
42016 Guastalla (RE) Italy
BARESHAFT END - SUCTION
CETRIFUGAL PUMPS
Platemountedhorizontalpump
DIESEL FIRE PUMP SELECTION
Pump Model Driven
m3/h
40 45 50 60 65 70 75 80 90 100 110 120 130 140 150 180 210 240 315 400
L/min 667 750 833 1000 1083 1167 1250 1333 1500 1667 1833 2000 2166 2333 2500 3000 3500 4000 5250 6667
NCB50-250NC 19Kw/25Hp
H(m)
73,3 71,5 70 65 62,3 60
NCB50-250NB 22Kw/30Hp
83,4 82 80 76 74 71 68 64,5
NCB50-250NA 30Kw/40Hp
91,5 90 88,7 85,5 83 81 80 77 71,3 65
NCB65-250NC 22Kw/30Hp
65,9 65,7 65,5 65 64,5 64 63 61,5 60
NCB65-250NA 37Kw/50Hp
88 87 86,5 86 85,5 85 84 82 80 78 74,8 74
NCB65-250NO 45Kw/60Hp
94 93 92,5 92 91 90 89 85,5 83,5 81 77 76 70
NCB80-250C 45Kw/60Hp
73,5 73 72 71,2 70,4 69 67,8 66,2 61,7
NCB80-250B 55Kw/75Hp
87 86,5 86 85 84,4 83,5 82,6 81 78 72,8 66
NCB80-250A 75Kw/100Hp
98 97 96 95,5 94,5 94 93 92 88,4 84,3 79,4
NCB100-250C 75Kw/100Hp
70 69,6 69,4 67,5 65 62,1
NCB100-250B 75Kw/100Hp
79 78,8 78,4 67,5 74 71,1 60,5
NCB100-250A 90Kw/125Hp
94,5 94 93,5 92 90 87,7 80 67
SAER ELETTROPOMPE S.p.A.
Sede legale e amministrativa: Via Circonvallazione, 22 - 42016 Guastalla (RE) - Italy Tel. +39 0522 830941 - Fax +39 0522 826948
R.E.A n. 158853 - Reg. Soc. Trib. RE n. 11813 - Reg. Impr./Cod. Fisc. e Part. IVA 01073840355 - Pos. Comm. Estero n. RE 007703 - Cap. Soc. Euro 2.550.000 i.v.
© Copyright 2010 Saer Elettropompe S.p.A. All rights reserved
ISO 9001:2008
SAER ELETTROPOMPE O.P.A.
Via Circonvallazione 22
42016 Guastalla (RE) Italy
BARESHAFT END - SUCTION
CETRIFUGAL PUMPS
Platemountedhorizontalpump
ELECTRIC FIRE PUMP SELECTION
Pump Model Driven
m3/h
40 45 50 60 65 70 75 80 90 100 110 120 130 140 150 180 210 240 315 400
L/min 667 750 833 1000 1083 1167 1250 1333 1500 1667 1833 2000 2166 2333 2500 3000 3500 4000 5250 6667
NCBZ2P50-250NC
19Kw/25Hp
H(m)
73,3 71,5 70 65 62,3 60
NCBZ2P50-250NB
22Kw/30Hp
83,4 82 80 76 74 71 68 64,5
NCBZ2P50-250NA
30Kw/40Hp
91,5 90 88,7 85,5 83 81 80 77 71,3 65
NCBZ2P65-250NC
22Kw/30Hp
65,9 65,7 65,5 65 64,5 64 63 61,5 60
NCBZ2P65-250NA
37Kw/50Hp
88 87 86,5 86 85,5 85 84 82 80 78 74,8 74
NCBZ2P65-250NO
45Kw/60Hp
94 93 92,5 92 91 90 89 85,5 83,5 81 77 76 70
NCBZ2P80-250C
45Kw/60Hp
73,5 73 72 71,2 70,4 69 67,8 66,2 61,7
NCBZ2P80-250B
55Kw/75Hp
87 86,5 86 85 84,4 83,5 82,6 81 78 72,8 66
NCBZ2P80-250A
75Kw/100Hp
98 97 96 95,5 94,5 94 93 92 88,4 84,3 79,4
NCBZ2P100-250C
75Kw/100Hp
70 69,6 69,4 67,5 65 62,1
NCBZ2P100-250B
75Kw/100Hp
79 78,8 78,4 67,5 74 71,1 60,5
NCBZ2P100-250A
90Kw/125Hp
94,5 94 93,5 92 90 87,7 80 67
SAER ELETTROPOMPE S.p.A.
Sede legale e amministrativa: Via Circonvallazione, 22 - 42016 Guastalla (RE) - Italy Tel. +39 0522 830941 - Fax +39 0522 826948
R.E.A n. 158853 - Reg. Soc. Trib. RE n. 11813 - Reg. Impr./Cod. Fisc. e Part. IVA 01073840355 - Pos. Comm. Estero n. RE 007703 - Cap. Soc. Euro 2.550.000 i.v.
© Copyright 2010 Saer Elettropompe S.p.A. All rights reserved
ISO 9001:2008
SAER ELETTROPOMPE S.p.A.
Via Circonvallazione 22
42016 Guastalla (RE) Italy
BARESHAFT END - SUCTION
CETRIFUGAL PUMPS
Platemountedhorizontalpump
CONSTRUCTION
The pumps of series NCB are single stage centrifugal pumps with horizontal axis and
overhang impeller hydraulically balanced, spiral body with axial suction and radial delivery
upwards. The bearings are prelubricated with grease or in oil bath according to the
performances and uses.
Standard parts enable a better selection of the sqare parts. With this modular system only 3
sizes of support are foreseen for 30 models of pumps. The anchorage to the base plate,
made through the feet of the pump body, along with the coupling if it is the type with spacer,
enable an easy disassemblying of the complete rotor without modifying the alignment of the
group and without disconnecting pipes and motor. The standard construction is with flanges
UNI 2236 PN 10.
CONSTRUCTIVE VARIATIONS
In oder to better satisfy the various necessities of services, the following constructive
variations are forseen:
1) Cooling at the stuffing box in order to cool the seal.
2) Reinforced support, when the working conditions stress particularly the bearings.
3) Oiler at constant level on request.
FIELDS OF DUTY
These pumps are used for fire water supply, both for civil and industrial purposes.
SEALS
Standard mechanical seal according to DIN 24960 (ISO 3069) with interchangable seat for
packing seal. But it is also possible to install any other type of seal. The lubrication of the seal
in normal working conditions is provided inside the pump but it is possible ta make any line of
lubrication to the seal.
CONSTRUCTIVE METERIAL
Standard construction in cast iron G 25 UNI 5007. On request it is possible to have other
constructive metallurgies.
PERFORMANCE DATA
Q up to 400m
3
/H.
H up to 95m.
Temp of the pumped liquid from – 15
o
C to + 120
o
C
TOLERANCES
The operating characteristics are guaranteed according to standards UNI/ISO 2548 class C
appendix B.
DIESEL ENGINE FOR FIRE PUMP
Manufacturer Kohler or Huyndai
Orginal Italy and Korea
No of cylinders 03-06
Type of Starter Battery 12 VDC
Cooling type Water Cooled
Engine on baseplase with Coupling & guard
ISO 9001:2008
90
Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm
2
/s, densità pari a 1000 kg/m
3
, temperatura acqua 15°C e materiali parti idrauliche in versione standard.
Tolleranza e curve secondo UNI EN ISO 9906 – Appendice A • The performance curves are based on the kinematic viscosity values = 1 mm
2
/s, density equal to 1000 kg/m
3
, temperature
of the water 15°C and materials of hydraulic parts in standard version. Tolerance and curves according to UNI EN ISO 9906 - Attachment A • Las curvas de rendimiento se refieren a
valores de viscosidad cinemática = 1 mm
2
/s, densidad de 1000 Kg/m
3
, temperatura del agua 15°C y materiales componentes hidráulicos en versión standard. Tolerancia de las curvas
de acuerdo con UNI EN ISO 9906 - Parrafo A • Les courbes de performances sont basées sur des valeurs de viscosité cinématique égale à 1 mm
2
/s, une densité égale à 1000 kg/m
3
,
température de l'eau 15°C et matériaux composantes hydrauliques en version standard. Tolérance et courbes conformes aux normes UNI EN ISO 9906 - Annexe A • Die Leistungskurven
beruhen auf einer kinematischen Zähflüssigkeit von 1 mm
2
/s, einer Dichte von 1000 kg/m
3
, Temperatur vom Wasser 15°C und Materialien hydraulischer Bestandteile in Standard-
Ausführung. Abweichung und Kurven gemäß UNI EN ISO 9906 - Anhang A • As curvas de rendimento referem-se a valores de viscosidade= 1 mm
2
/s, densidade igual a 1000
kg/m
3
,temperatura da água 15°C e materiais partes hidraulicas en ejecucion estandard. Tolerância das curvas de acordo com UNI EN ISO 9906 - Parágrafo A.
IR/MG/NCB
Tipo
Type - Tipo - Type - Typ - Tipo
50 - 250 N
Taglia
Size - Tamaño - Taille - Größe - Tamanho
2900 1/min
n
IR
MG
NCB
50-250 NA 50-250 NB/A 50-250 NB/B 50-250 NC/A 50-250 NC/B 50-250 ND
✔ ✔ ✔ ✔ ✔ ✔
✔ ✘ ✔ ✘ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
95
Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm
2
/s, densità pari a 1000 kg/m
3
, temperatura acqua 15°C e materiali parti idrauliche in versione standard.
Tolleranza e curve secondo UNI EN ISO 9906 – Appendice A • The performance curves are based on the kinematic viscosity values = 1 mm
2
/s, density equal to 1000 kg/m
3
, temperature
of the water 15°C and materials of hydraulic parts in standard version. Tolerance and curves according to UNI EN ISO 9906 - Attachment A • Las curvas de rendimiento se refieren a
valores de viscosidad cinemática = 1 mm
2
/s, densidad de 1000 Kg/m
3
, temperatura del agua 15°C y materiales componentes hidráulicos en versión standard. Tolerancia de las curvas
de acuerdo con UNI EN ISO 9906 - Parrafo A • Les courbes de performances sont basées sur des valeurs de viscosité cinématique égale à 1 mm
2
/s, une densité égale à 1000 kg/m
3
,
température de l'eau 15°C et matériaux composantes hydrauliques en version standard. Tolérance et courbes conformes aux normes UNI EN ISO 9906 - Annexe A • Die Leistungskurven
beruhen auf einer kinematischen Zähflüssigkeit von 1 mm
2
/s, einer Dichte von 1000 kg/m
3
, Temperatur vom Wasser 15°C und Materialien hydraulischer Bestandteile in Standard-
Ausführung. Abweichung und Kurven gemäß UNI EN ISO 9906 - Anhang A • As curvas de rendimento referem-se a valores de viscosidade= 1 mm
2
/s, densidade igual a 1000
kg/m
3
,temperatura da água 15°C e materiais partes hidraulicas en ejecucion estandard. Tolerância das curvas de acordo com UNI EN ISO 9906 - Parágrafo A.
IR/MG/NCB
Tipo
Type - Tipo - Type - Typ - Tipo
65 - 250 N
Taglia
Size - Tamaño - Taille - Größe - Tamanho
2900 1/min
n
IR
MG
NCB
65-250 NA 65-250 NB 65-250 NC 65-250 NO
✔ ✔ ✔ ✘
✔ ✔ ✔ ✘
✔ ✔ ✔ ✔
99
Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm
2
/s, densità pari a 1000 kg/m
3
, temperatura acqua 15°C e materiali parti idrauliche in versione standard.
Tolleranza e curve secondo UNI EN ISO 9906 – Appendice A • The performance curves are based on the kinematic viscosity values = 1 mm
2
/s, density equal to 1000 kg/m
3
, temperature
of the water 15°C and materials of hydraulic parts in standard version. Tolerance and curves according to UNI EN ISO 9906 - Attachment A • Las curvas de rendimiento se refieren a
valores de viscosidad cinemática = 1 mm
2
/s, densidad de 1000 Kg/m
3
, temperatura del agua 15°C y materiales componentes hidráulicos en versión standard. Tolerancia de las curvas
de acuerdo con UNI EN ISO 9906 - Parrafo A • Les courbes de performances sont basées sur des valeurs de viscosité cinématique égale à 1 mm
2
/s, une densité égale à 1000 kg/m
3
,
température de l'eau 15°C et matériaux composantes hydrauliques en version standard. Tolérance et courbes conformes aux normes UNI EN ISO 9906 - Annexe A • Die Leistungskurven
beruhen auf einer kinematischen Zähflüssigkeit von 1 mm
2
/s, einer Dichte von 1000 kg/m
3
, Temperatur vom Wasser 15°C und Materialien hydraulischer Bestandteile in Standard-
Ausführung. Abweichung und Kurven gemäß UNI EN ISO 9906 - Anhang A • As curvas de rendimento referem-se a valores de viscosidade= 1 mm
2
/s, densidade igual a 1000
kg/m
3
,temperatura da água 15°C e materiais partes hidraulicas en ejecucion estandard. Tolerância das curvas de acordo com UNI EN ISO 9906 - Parágrafo A.
MG / NCB
Tipo
Type - Tipo - Type - Typ - Tipo
80 - 250
Taglia
Size - Tamaño - Taille - Größe - Tamanho
2900 1/min
n
MG
NCB
80-250 A 80-250 B 80-250 C
✔ ✔ ✔
✔ ✔ ✔
101
Le curve di prestazione sono basate su valori di viscosità cinematica = 1 mm
2
/s, densità pari a 1000 kg/m
3
, temperatura acqua 15°C e materiali parti idrauliche in versione standard.
Tolleranza e curve secondo UNI EN ISO 9906 – Appendice A • The performance curves are based on the kinematic viscosity values = 1 mm
2
/s, density equal to 1000 kg/m
3
, temperature
of the water 15°C and materials of hydraulic parts in standard version. Tolerance and curves according to UNI EN ISO 9906 - Attachment A • Las curvas de rendimiento se refieren a
valores de viscosidad cinemática = 1 mm
2
/s, densidad de 1000 Kg/m
3
, temperatura del agua 15°C y materiales componentes hidráulicos en versión standard. Tolerancia de las curvas
de acuerdo con UNI EN ISO 9906 - Parrafo A • Les courbes de performances sont basées sur des valeurs de viscosité cinématique égale à 1 mm
2
/s, une densité égale à 1000 kg/m
3
,
température de l'eau 15°C et matériaux composantes hydrauliques en version standard. Tolérance et courbes conformes aux normes UNI EN ISO 9906 - Annexe A • Die Leistungskurven
beruhen auf einer kinematischen Zähflüssigkeit von 1 mm
2
/s, einer Dichte von 1000 kg/m
3
, Temperatur vom Wasser 15°C und Materialien hydraulischer Bestandteile in Standard-
Ausführung. Abweichung und Kurven gemäß UNI EN ISO 9906 - Anhang A • As curvas de rendimento referem-se a valores de viscosidade= 1 mm
2
/s, densidade igual a 1000
kg/m
3
,temperatura da água 15°C e materiais partes hidraulicas en ejecucion estandard. Tolerância das curvas de acordo com UNI EN ISO 9906 - Parágrafo A.
NCB
Tipo
Type - Tipo - Type - Typ - Tipo
100 - 250
Taglia
Size - Tamaño - Taille - Größe - Tamanho
2900 1/min
n
NCB
100-250 A 100-250 B 100-250 C 100-250 D
✔ ✔ ✔ ✔
. SAER ELETTROPOMPE O.P.A. Via Circonvallazione 22 42016 Guastalla (RE) Italy BARESHAFT END - SUCTION CETRIFUGAL PUMPS Platemountedhorizontal pump DIESEL FIRE PUMP SELECTION Pump. 42016 Guastalla (RE) Italy BARESHAFT END - SUCTION CETRIFUGAL PUMPS Platemountedhorizontal pump ELECTRIC FIRE PUMP SELECTION Pump Model Driven m3/h 40 45 50 60 65 70 75 80 90 100 110 120. catalogo. • Saer can alter without notifications the data mentioned in this catalogue. • Saer se reserva el derecho de modificar los datos indicados en este catalogo sin previo aviso. • Saer se réserve
Ngày đăng: 28/03/2014, 15:18
Xem thêm: catalogue diesel fire pump 7 2013