Tài liệu ôn tập HK

211-05-1 Steering Column Switches 211-05-1 SECTION 211-05 Steering Column Switches VEHICLE APPLICATION: 2011.50 Ranger CONTENTS PAGE REMOVAL AND INSTALLATION Ignition Switch (33 616 0) Steering Column Multifunction Switch (33 612 0) Steering Column Multifunction Switch LH Steering Column Multifunction Switch RH Steering Column Lock and Ignition Switch Housing 211-05-2 211-05-4 211-05-5 211-05-7 211-05-9 211-05-2 Steering Column Switches 211-05-2 REMOVAL AND INSTALLATION Ignition Switch(33 616 0) Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures) 2011.50 Ranger G1269929en 211-05-3 Steering Column Switches 211-05-3 REMOVAL AND INSTALLATION Installation To install, reverse the removal procedure 2011.50 Ranger G1269929en 211-05-4 Steering Column Switches 211-05-4 REMOVAL AND INSTALLATION Steering Column Multifunction Switch(33 612 0) Removal Refer to: Clockspring (501-20 Supplemental Restraint System, Removal and Installation) Torque: Nm NOTE: Removal steps in this procedure may contain installation details Installation To install, reverse the removal procedure 2011.50 Ranger G1269932en 211-05-5 Steering Column Switches 211-05-5 REMOVAL AND INSTALLATION Steering Column Multifunction Switch LH Removal NOTE: Removal steps in this procedure may contain installation details Torque: 1.5 Nm Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures) Torque: 1.5 Nm 2011.50 Ranger G1409823en 211-05-6 Steering Column Switches 211-05-6 REMOVAL AND INSTALLATION Torque: 2.5 Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1409823en 211-05-7 Steering Column Switches 211-05-7 REMOVAL AND INSTALLATION Steering Column Multifunction Switch RH Removal NOTE: Removal steps in this procedure may contain installation details Torque: 1.5 Nm Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures) Torque: 1.5 Nm 2011.50 Ranger G1409824en 211-05-8 Steering Column Switches 211-05-8 REMOVAL AND INSTALLATION Torque: 2.5 Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1409824en 211-05-9 Steering Column Switches 211-05-9 REMOVAL AND INSTALLATION Steering Column Lock and Ignition Switch Housing General Equipment Punch Removal NOTE: Removal steps in this procedure may contain installation details Torque: 30 Nm Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures) Refer to: Steering System Health and Safety Precautions (100-00 General Information, Description and Operation) Refer to: Ignition Switch (211-05 Steering Column Switches, Removal and Installation) Turn the ignition key to position I General Equipment: Punch NOTE: This step is only necessary when installing a new component Installation To install, reverse the removal procedure 2011.50 Ranger G1295676en