Tài liệu ôn tập HK

206-02-1 Drum Brake 206-02-1 SECTION 206-02 Drum Brake VEHICLE APPLICATION: 2011.50 Ranger CONTENTS PAGE REMOVAL AND INSTALLATION Wheel Cylinder Brake Shoes 206-02-2 206-02-3 206-02-2 Drum Brake 206-02-2 REMOVAL AND INSTALLATION Wheel Cylinder Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation) Refer to: Brake Shoes (206-02 Drum Brake, Removal and Installation) Torque: 19 Nm Torque: 13 Nm Installation To install, reverse the removal procedure Refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures) 2011.50 Ranger G1269455en 206-02-3 Drum Brake 206-02-3 REMOVAL AND INSTALLATION Brake Shoes Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation) Hold the wheel cylinder pistons in place with a plastic band before removal of shoes 2011.50 Ranger G1269456en 206-02-4 Drum Brake 206-02-4 REMOVAL AND INSTALLATION CAUTION: Do not damage the wheel cylinder boots Installation Turn the adjuster on the adjustment strut to adjust the brake shoe until the outer diameter of the brake shoe is as specified Refer to: Specifications (206-00 Brake System - General Information, Specifications) 2011.50 Ranger G1269456en 206-02-5 Drum Brake 206-02-5 REMOVAL AND INSTALLATION To install, reverse the removal procedure Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation) Depress the brake pedal to adjust the brake shoes 2011.50 Ranger G1269456en