Compact photoelectric sensor CX 400 SERIES ver 2

Amplifier Built in Compact Photoelectric Sensor CX 400 SERIES Ver 2 2022 6 Amplifier Built in Compact Photoelectric Sensor CX 400 SERIES Ver 2 The contents of this catalog are as of October 2017 F. Compact photoelectric sensor CX 400 SERIES ver 2

Amplifier Built-in Compact Photoelectric Sensor CX-400 SERIES Ver.2 2022.6 * The contents of this catalog are as of October 2017 For the latest information, please visit our company website Compact Photoelectric Sensor Amplifier Built-in CX-400 SERIES Ver.2 Recognition Certified (Some models only) PNP output type available Light intensity monitor Interference prevention Sensors that are environmentally and user friendly Reducing environmental burdens further Up to 60% less power consumption The various lineup covers through the inclusion of a newly developed custom integrated circuit.The CX-400 series achieves reductions in power consumption of up to 60%, averaging 44% reduction when upgrading due to its unique design These sensors reduce carbon emissions and contribute to environmental friendliness Providing stable detection with low power consumption Includes an analog CMOS processor ASIC Upgrade for up to 60 Previous CX-482 25 mA % reduction The lens material for the thru-beam type, retroreflective type (excluding the CX-48□) and the diffuse reflective type are made of a strong acrylic that resists the harmful effects of coolants These sensors can be used with confidence even around metal processing machinery that disperses oil mists The protection mechanism also conforms to IP67 (IEC) Test Oil JIS Standard Product Name Lubricant - Velocity Oil No Water-insoluble cutting oil 2-5 Daphnecut AS-30D 2-11 Yushiron Oil No.2ac (Note) W1-1 Yushiron Lubic HWC68 (Note) W2-1 Yushiroken S50N (Note) Water-soluble cutting oil 1,000 hours; Immersion (depth m); Insulation resistance 20 MΩ/250 V Note: Yushiron and Yushiroken are registered trademarks of Yushiro Chemical Industry Co., Ltd Strong against ethanol New CX-482 10 mA Contributing to reduced carbon dioxide emissions Electricity consumed by the CX-400 series has been reduced on average 10.5 mA Calculating hours/day, 260 days (operating days/week) for a total of 2,080 hours/year leads to: Strong against oil and coolant liquids CX-41□/42□/49□ The CX-400 contributes Approx 84.6 t annually in carbon dioxide reductions to the world CX-44□/48□ A strong, ethanol resistant polycarbonate was used for the front and display covers Safe even for installing near food processing machinery that disperses ethanol based detergents The protection mechanism also conforms to IP67 (IEC) Caution: Set the CX-48□ so that cleaning liquid will not get on to the attached reflector Compact Photoelectric Sensor CX-400 SERIES Ver.2 APPLICATIONS Detecting out of position tape feeder cassette Detecting objects in dusty environment Passage confirmation of object on a conveyor belt CX-412 Slit mask CX-491 Out of position CX-411 Detecting transparent glass bottles Detecting a small tablet Detecting a biscuit CX-441 CX-443 CX-481 BASIC PERFORMANCE Strong infrared beam CX-412/413 Remarkable penetrating power enables applications such as package content detection Can sense differences as small as 0.4 mm 0.016 in, CX-441/443 with hysteresis of % or less An advanced optical system provides sensing performance that is 2.5 times approx than conventional models Even ultra-small differences of 0.4 mm 0.016 in can be detected accurately 2.5 times the sensing capability! Note: When sensing utilizing penetrating power, make sure to verify using the actual sensor Hardly affected by colors CX-441/443 Both black and white objects can be sensed at the same distances No adjuster control is needed, even when products of different colors are moving along the production line Height differences of as little as 0.4 mm 0.016 in can be detected at a setting distance of 20 mm 0.787 in Retroreflective type with polarizing filters CX-491 Built-in polarizing filters ensure stable sensing even on a specular object 30 % higher sensing capability CX-491 The difference in sensing ranges is 1% or less between non-glossy white paper with a setting distance of 50 mm 1.969 in and non-glossy gray paper with a brightness level of Compact Photoelectric Sensor CX-400 SERIES Ver.2 BASIC PERFORMANCE CX-48□ Introducing the transparent object sensing type sensor Our unique optical system and transparent object sensing circuitry provide stable sensing of even thinner transparent objects than the conventional models Twice the sensing range! Sensing object Sensing object size (mm in) Glass sheet 50 × 50 1.969 × 1.969 t = 0.7 0.028 Cylindrical glass ø50 ø1.969 ℓ = 50 1.969 t = 1.3 0.051 Acrylic board 50 × 50 1.969 × 1.969 t = 1.0 0.039 Styrol (Floppy case) 50 × 50 1.969 × 1.969 t = 0.9 0.035 Food wrapping film 50 × 50 1.969 × 1.969 t = 10 µm 0.394 mil Cigarette case film 50 × 50 1.969 × 1.969 t = 20 àm 0.787 mil Vinyl sack 50 ì 50 1.969 ì 1.969 t = 30 àm 1.181 mil PET bottle (500mℓ) ø66 ø2.598 Reflector setting range CX-481: 300 to 500 mm 11.811 to 19.685 in, CX-482: to m 3.281 to 6.562 ft [with the RF-230 reflector at the optimum condition (Note)] Each object should pass across the beam at the center between the sensor and the reflector ℓ: Length of cylindrical glasses t: Thickness of sensing object Note: The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent CX-482 Long sensing range of m 16.4 ft Transparent objects detectable with CX-48□ (Typical examples) CX-493 Ultra-long sensing range of 30 m 98.4 ft CX-413 The CX-413 achieves the ultra-long sensing range of 30 m 98.4 ft It can be used for a stacker crane or a multilevel parking structure A long m 16.4 ft sensing range is possible with the red LED type that is easy to align with the beam axis Can be used for wide automatic door shutters ENVIRONMENTAL RESISTANCE Strong on dust and dirt CX-412/413 Because the light source is an infrared light, it is strong on dust and dirt compared to the red beam type Strong even in cold environments Stronger noise resistance The CX-400 series has a higher noise resistance than its previons model By incorporating an inverter countermeasure circuit that appropriately shifts with peak wavelength, the sensor now resists high-frequency noise from high-voltage inverter motors and inverter lights more effectively Fluorescent light Stable performance can be maintained even in environments of –25 °C –13 °F ECO Thoroughly eliminating unnecessary waste, Reducing many environmental burdens The CX-400 series has three different cable length types and uses very simple packaging to reduce waste The bag is made of polyethylene and does not emit toxic gasses Inverter motor Compact Photoelectric Sensor CX-400 SERIES Ver.2 MOUNTING Beam axis alignment made easy with a high luminance spot beam CX-423 The bright spot makes beam axis alignment easy CX-44□ These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance Because it achieved small beam spot approx ø2 mm ø0.079 in at setting distance 100 mm 3.937 in, approx ø5 mm ø0.197 in at setting distance 200 mm 7.874 in, even the minutest object can be accurately detected These sensors have a high luminance red spot that provides bright visibility The sensing position can be checked at a glance Because the CX-441 sensor has the smallest spot in its class ø2 mm ø0.079 in approx., even the minutest object can be accurately detected CX-423 Great visibility approx ø2 mm ø0.079 in high luminance spot beam (at setting distance 100 mm 3.937 in) Great visibility approx ø2 mm ø0.079 in high luminance spot CX-441 OPERABILITY Reduction of volume adjustment labor CX-42□ Can be used for sensing minute differences CX-44□ Because these sensors possess many variations depending on the sensing range, enables you to make optimal volume adjustment easily Equipped with a 5-turn adjuster so that even challenging range settings can be handled with ease CX-422: 800 mm 31.496 in CX-421: 300 mm 11.811 in CX-424: 100 mm 3.937 in Narrow-view type CX-423: 70 to 300 mm 2.756 to 11.811 in VARIETIES Basic type available Select from spot diameters as per the application CX-441/443 Omit the sensitivity adjuster and operation mode switch and release a basic type cable 0.5 m 1.641 ft in length If the usage is clear, quick construction can be performed onsite without detailed adjustments and the cost can be controlled Within the choice of 50 mm 1.969 in sensing range sensors, we offer small spot approx ø2 mm ø0.079 in type optimal for detecting minute object and large approx ø6.5 mm ø0.256 in spot type capable of sensing object covered with holes and grooves Less processing time M8 plug-in connector type and M12 pigtailed type are available This contributes to less time spent in setting up In addition, cable types are available with cable lengths of 0.5 m 1.640 ft, m 6.562 ft and m 16.404 ft This results in less wastage No unnecessary cables or terminal blocks CX-441 Cable type m 16.404 ft Great maintainability m 6.562 ft M8 plug-in connector type ft / ( 25 mm 6.562 16.404 ft ) ft / ( 25 mm 6.562 16.404 ft ) Elbow Straight 0.5 m 1.640 ft M12 pigtailed type Straight ft / ( 25 mm 6.562 16.404 ft ) Spot diameter: ø2 mm ø0.079 in approx [Positioning] Detects minute holes CX-443 Spot diameter: ø6.5 mm ø0.256 in approx Detection of presence / absence of objects Ignores minute holes and accurately detects objects Compact Photoelectric Sensor CX-400 SERIES Ver.2 FUNCTIONS CX-44□ BGS/FGS functions make even the most challenging settings possible! The BGS function is best suited for the following case The FGS function is best suited for the following case Background not present When object and background are separated Background present When object and background are close together When the object is glossy or uneven BGS FGS Unaffected by gloss, color or uneven surfaces when sensing objects present on a conveyor belt Not affected if the background color changes or someone passes behind the conveyor Caution: Please use the FGS function together with a conveyor or other background unit BGS (Background suppression) function The sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element) This is useful if the object and background are far apart The distance adjustment method is the same as the conventional adjustment method for adjustable range reflective type sensors OFF Background Light received at element B, or light not received The sensor judges that an object is present when no light is received at position B of the light-receiving element (2- segment element) Accordingly, even objects that are glossy can be sensed This is useful if the object and background are close together, or if the object being sensed is glossy OFF in this condition only ON Object absent (Light received at element A) Element A Element B Moving object in the back FGS (Foreground suppression) function Object OFF A ON in all other conditions Object present For glossy object ON ON Emitting element B Lens Setting distance Setting distance Conveyor Light received at position B A conveyor or other back-ground must be present Strong against interference The interference prevention function lets two sensors to be mounted close together precisely Interference prevention filter (Optional) Retroreflective type Diffuse reflective type Adjustable range reflective type Thru-beam type Only CX-411 Automatic interference prevention function Conveyor Light received at position A Conveyor Light is not received at position B, so a object is judged to be present Compact Photoelectric Sensor CX-400 SERIES Ver.2 ORDER GUIDE Standard type Type Appearance Model No (Note 1) Sensing range NPN output PNP output CX-411 CX-411-P CX-412 CX-412-P CX-413 CX-413-P CX-491 CX-491-P CX-493 CX-493-P 50 to 500 mm 1.969 to 19.685 in (Note 2) CX-481 CX-481-P 50 to 1,000mm 1.969 to 39.37 in (Note 2) CX-483 CX-483-P 0.1 to m 0.328 to 6.562 ft (Note 2) CX-482 CX-482-P CX-424 CX-424-P CX-421 CX-421-P CX-422 CX-422-P CX-423 CX-423-P CX-441 CX-441-P CX-443 CX-443-P CX-444 CX-444-P CX-442 CX-442-P 30 m 98.425 ft Long sensing With polarizing range filters Thru-beam 15 m 49.213 ft m 9.843 ft (Note 2) 300 mm 11.811 in 800 mm 31.496 in Small Narrowspot view Diffuse reflective 100 mm 3.937 in Adjustable range reflective Emitting element Red LED Infrared LED Red LED m 16.404 ft (Note 2) For transparent object sensing Retroreflective Long sensing range 10 m 32.808 ft Output operation 70 to 300 mm 2.756 to 11.811 in Switchable either Light-ON or Dark-ON Infrared LED Infrared LED Red LED to 50 mm 0.079 to 1.969 in 15 to 100 mm 0.591 to 3.937 in 20 to 300 mm 0.787 to 11.811 in Switchable either Detection-ON or Detection-OFF Red LED NOTE: Mounting bracket is not supplied with the sensor Please select from the range of optional sensor mounting brackets Notes: 1) The model No with “E” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver 2) The sensing range of the retroreflective type sensor is specified for the RF-230 (optional) reflector The sensing range represents the actual sensing range of the sensor The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object Be sure to check the operation with the actual sensing object Sensing range: A Sensor CX-491□ CX-493□ CX-481□ CX-483□ CX-482□ Sensing object A Setting range of the reflector: B B 0.1 to m 0.1 to m 100 to 500 mm 100 to 1,000 mm 0.8 to m 0.328 to 9.843 ft 0.328 to 16.404 ft 3.937 to 19.685 in 3.937 to 39.37 in 2.625 to 6.562 ft Reflector to m to 16.404 ft 50 to 500 mm 50 to 1,000 mm 0.1 to m 1.969 to 19.685 in 1.969 to 39.37 in 0.328 to 6.562 ft to m to 9.843 ft Compact Photoelectric Sensor CX-400 SERIES Ver.2 ORDER GUIDE Basic type (Without operation mode switch and sensitivity adjuster Cable is 0.5 m 1.640 ft long.) Type Appearance Sensing range Model No.(Note 1) NPN output PNP output Output operation CX-411A-C05 CX-411A-P-C05 Light-ON CX-411B-C05 CX-411B-P-C05 Dark-ON CX-412A-C05 CX-412A-P-C05 Light-ON CX-412B-C05 CX-412B-P-C05 Dark-ON CX-491A-C05-Y CX-491A-P-C05-Y Light-ON CX-491B-C05-Y CX-491B-P-C05-Y Dark-ON Thru-beam Long sensing range Retroreflective 15 m 49.213 ft With polarizing filters 10 m 32.808 ft m 9.843 ft (Note 3) Optional (Note 2) Emitting element Red LED Infrared LED Red LED NOTE: Mounting bracket is not supplied with the sensor Please select from the range of optional sensor mounting brackets Notes: 1) The model No with “E” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver 2) The reflector is an option The sensing range of the leflector is specified for the RF-230 3) The sensing range of the retroreflective type sensor is specified for the RF-230 (optional) reflector (p.10) The sensing range represents the actual sensing range of the sensor The sensing range : A of the table below may vary depending on the shape of sensing object Be sure to check the operation with the actual sensing object Sensing range: A Sensor CX-491□ Sensing object A to m to 9.843 ft Setting range of the reflector: B B 0.1 to m 0.328 to 9.843 ft Reflector (Optional) Compact Photoelectric Sensor CX-400 SERIES Ver.2 ORDER GUIDE 0.5 m 1.640 ft / m 16.404 ft cable length types 0.5 m 1.640 ft / m 16.404 ft cable length types (standard: m 6.562 ft, basic: 0.5 m 1.640 ft) are also available When ordering this type, suffix “-C05” for the 0.5 m 1.640 ft cable length type, “-C5” for the m 16.404 ft cable length type to the model No (Excluding CX-44□ and basic type) (e.g.) 0.5 m 1.640 ft cable length type of CX-411-P is “CX-411-P-C05” m 16.404 ft cable length type of CX-411-P is “CX-411-P-C5” M8 plug-in connector type, M12 pigtailed type M8 plug-in connector type and M12 pigtailed type are also available When ordering this type, suffix “-Z” for the M8 connector type, “-J” for the M12 pigtailed type to the model No. (Please note that M12 pigtailed type is not available for CX-44□ Excluding basic type) (e.g.) M8 connector type of CX-411-P is “CX-411-P-Z” M12 pigtailed type of CX-411-P is “CX-411-P-J” • Mating cable (2 cables are required for the thru-beam type.) For M12 pigtailed type For M8 plug-in connector type Type Straight Elbow 2-core 4-core Model No Cable length CN-24A-C2 m 6.562 ft CN-24A-C5 m 16.404 ft CN-24AL-C2 m 6.562 ft CN-24AL-C5 m 16.404 ft CN-22-C2 m 6.562 ft CN-22-C5 m 16.404 ft CN-24-C2 m 6.562 ft CN-24-C5 m 16.404 ft Description Mating cable • CN-24A-C2 CN-24A-C5 • CN-24AL-C2 CN-24AL-C5 Can be used with all models For thru-beam type emitter (2-core) ø9 mm ø0.354 in 31.4 mm 1.236 in 23.1 mm 0.909 in 20.5 mm 0.807 in ø4 mm ø0.157 in Can be used with all models ø4 mm ø0.157 in Package without reflector NPN output type: CX-491-Y PNP output type: CX-491-P-Y ø9 mm ø0.354 in • CN-22-C2, CN-22-C5 CN-24-C2, CN-24-C5 ø14 mm ø0.551 in Accessory • RF-230 (Reflector) 300 mm 11.811 in ø5 mm ø0.197 in 10 Compact Photoelectric Sensor CX-400 SERIES Ver.2 OPTIONS Model No Designation Slit mask Sensor CX-411□ OS-CX-05 CX-413□ Round slit mask () For thrubeam type sensor only CX-412□ CX-411□ OS-CX-1 CX-412□ CX-413□ CX-411□ OS-CX-2 CX-412□ CX-413□ CX-411□ OS-CX-05×6 Rectangular slit mask For thrubeam type sensor only () CX-412□ CX-413□ CX-411□ OS-CX-1×6 CX-412□ CX-413□ CX-411□ OS-CX-2×6 CX-412□ CX-413□ Designation Model No Interference prevention filter For CX-411□ only () Slit size ø0.5 mm ø0.020 in ø1 mm ø0.039 in ø2 mm ø0.079 in 0.5 × mm 0.020 × 0.236 in × mm 0.039 × 0.236 in × mm 0.079 × 0.236 in Sensing range Slit on one side Min sensing object Slit on both sides 400 mm 15.748 in 20 mm 0.787 in 600 mm 23.622 in 30 mm 1.181 in PF-CX4-H Slit on both sides ø12 mm ø0.472 in ø0.5 mm ø0.020 in 1,200 mm 47.242 in 60 mm 2.362 in 900 mm 35.433 in 100 mm 3.937 in 1.35 m 4.429 ft 150 mm 5.906 in 2.7 m 8.857 ft 300 mm 11.811 in m 6.562 ft 400 mm 15.748 in m 9.843 ft 600 mm 23.622 in m 19.685 ft 1,200 mm 47.242 in m 6.562 ft 400 mm 15.748 in m 9.843 ft 600 mm 23.622 in m 19.685 ft 1,200 mm 47.242 in m 9.843 ft m 3.281 ft 4.5 m 14.764 ft 1.5 m 4.921 ft m 29.528 ft m 9.843 ft m 16.404 ft m 6.562 ft 7.5 m 24.606 ft m 9.843 ft 15 m 49.213 ft m 19.685 ft Sensing range Min sensing object PF-CX4-V (Vertical, Silver) pcs per set Slit on one side ø12 mm ø0.472 in (Note 1) m 16.404 ft (Note 1) ø1 mm ø0.039 in ø12 mm ø0.472 in ø1.5 mm ø0.059 in ø2 mm ø0.079 in ø12 mm ø0.472 in ø3 mm ø0.118 in ø12 mm ø0.472 in 0.5 × mm 0.020 × 0.236 in ø12 mm ø0.472 in × mm 0.039 × 0.236 in ø12 mm ø0.472 in × mm 0.079 × 0.236 in Round slit mask Round slit mask (Stainless steel) • OS-CX-□ Fitted on the front face of the sensor with onetouch (Horizontal, Light brown) pcs per set RF-210 Reflector () For retroreflective type sensor only RF-220 RF-230(Note 3) CX-491□ m 3.281 ft (Note 2) CX-493□ 1.5 m 4.921 ft (Note 2) Rectangular slit mask CX-481 ã OS-CX-ì6 Fitted on the front face of the sensor with onetouch ø30 mm ø1.181 in CX-483□ 0.1 to 0.3 m 0.328 to 0.984 ft (Note 2) CX-482□ 0.1 to 0.6 m 0.328 to 1.969 ft (Note 2) CX-491□ 1.5 m 4.921 ft (Note 2) CX-493□ m 9.843 ft (Note 2) CX-481□ 50 to 300 mm 1.969 to 11.811 in (Note 2) CX-483□ 0.1 to 0.7 m 0.328 to 2.297 ft (Note 2) CX-482□ 0.1 to 1.3 m 0.328 to 4.265 ft (Note 2) CX-491□-Y□ m 9.843 ft (Note 2) ø35 mm ø1.378 in Interference prevention filter Rectangular slit mask (Stainless steel) Interference prevention filter • PF-CX4-V (Vertical, Silver) • PF-CX4-H (Horizontal, Light brown) Two sets of CX-411□ can be mounted close together ø50 mm ø1.969 in Notes: 1) Value when attached on both sides 2) Set the distance between the CX-491□/493□ and the reflector to 0.1 m 0.328 ft or more However, see the table below for CX-48□ The sensing range “A” may vary depending on the shape of sensing object Be sure to check the operation with the actual sensing object Sensing range: A Sensing object Sensor Setting range of the reflector: B Model No Sensor CX-481□ CX-483□ CX-482□ Reflector Reflector • RF-210 Reflector A B RF-220 50 to 300 mm 1.969 to 11.811 in 100 to 300 mm 3.937 to 11.811 in RF-220 0.1 to 0.7 m 0.328 to 2.297 ft 0.2 to 0.7 m 0.656 to 2.297 ft RF-210 0.1 to 0.3 m 0.328 to 0.984 ft 0.1 to 0.3 m 0.328 to 0.984 ft RF-230 0.05 to m 0.164 to 3.281 ft 0.1 to m 0.328 to 3.281 ft RF-220 0.1 to 1.3 m 0.328 to 4.265 ft 0.5 to 1.3 m 1.640 to 4.265 ft RF-210 0.1 to 0.6 m 0.328 to 1.969 ft 0.3 to 0.6 m 0.984 to 1.969 ft 12.8 mm 0.504 in 33.3 mm 1.311 in 3) RF-230 is attached to the retroreflective type sensor other than the basic type 11 mm 0.433 in • RF-220 35.3 mm 1.390 in 8.3 mm 0.327 in • RF-230 50.3 mm 1.98 in 42.3 mm 1.665 in 59.3 mm 2.235 in 8.3 mm 0.327 in 16 CX-400 SERIES Ver.2 Compact Photoelectric Sensor SENSING CHARACTERISTICS (TYPICAL) CX-411□ Thru-beam type Emitter L ℓ 6.562 Horizontal direction 3.281 Emitter Receiver ℓ Slit on both sides Vertical direction Slit on both sides Horizontal direction Vertical direction Emitter ℓ L L Setting distance L (mm in) Slit on both sides Vertical direction Emitter Slit on both sides Vertical direction ℓ L L 20 20 40 0.787 0.787 1.575 Center Left Right Operating point ℓ (mm in) Parallel deviation with rectangular slit masks (2 × mm 0.079 × 0.236 in) Slit on one side Horizontal direction Slit on one side Vertical direction Slit on both sides Slit on both sides Horizontal 13.123 Horizontal Vertical direction direction direction Emitter Receiver Receiver 0 200 100 100 200 7.874 7.874 3.937 3.937 (Down) Left Right (Up) Center Operating point ℓ (mm in) 6.562 ℓ ℓ L 16.404 ℓ L Receiver θ L 10 32.808 40 500 500 1,000 19.685 19.685 39.370 Center Left Right Operating point ℓ (mm in) 400 15.748 Receiver 16.404 20 20 Center Left Right Operating angle θ( ° ) 400 15.748 Slit on both sides Emitter ℓ L Receiver 200 200 400 7.874 7.874 15.748 Center Left Right Operating point ℓ (mm in) Setting distance L (m ft) 13.123 Setting distance L (m ft) 13.123 Slit on one side Slit on one side Horizontal Vertical direction direction 6.562 Horizontal direction Emitter 3.281 ℓ L Vertical direction Emitter ℓ L Receiver Receiver 400 200 200 400 15.748 7.874 7.874 15.748 (Down) Left Right (Up) Center Operating point ℓ (mm in) L Receiver Parallel deviation with rectangular slit masks (1 × mm 0.039 × 0.236 in) Horizontal direction 6.562 Emitter ℓ L 1.5 4.921 3.281 Emitter 0.5 1.640 ℓ L Receiver Receiver 400 200 200 400 15.748 7.874 7.874 15.748 (Down) Left Right (Up) Center Operating point ℓ (mm in) L Receiver 100 100 200 3.937 3.937 7.874 Center Left Right Operating point ℓ (mm in) Parallel deviation with rectangular slit masks (2 × mm 0.079 × 0.236 in) Slit on one side Slit on one side Horizontal Vertical direction direction 19.685 Vertical direction Emitter ℓ Slit on both sides 26.247 Slit on one side Slit on one side Vertical Horizontal direction direction Slit on both sides Horizontal and Vertical direction Slit on one side 200 7.874 50 50 100 1.969 1.969 3.937 Center Left Right Operating point ℓ (mm in) 13.123 Slit on both sides Horizontal and Vertical direction ℓ Slit on both sides 100 3.937 40 Parallel deviation with rectangular slit masks (0.5 × mm 0.020 × 0.236 in) 9.843 Emitter 200 7.874 Parallel deviation with round slit masks (ø2 mm ø0.079 in) Slit on one side 6.562 Slit on one side 600 23.622 Emitter Parallel deviation with round slit masks (ø1 mm ø0.039 in) Setting distance L (m ft) Emitter 800 31.496 Setting distance L (mm in) 10 32.808 Parallel deviation with round slit masks (ø0.5 mm ø0.020 in) Setting distance L (m ft) 15 49.213 Setting distance L (m ft) 15 49.213 Setting distance L (m ft) 20 65.617 3.281 L Receiver Receiver 200 100 100 200 7.874 3.937 3.937 7.874 (Down) Left Right (Up) Center Operating point ℓ (mm in) Setting distance L (m ft) Angular deviation 20 65.617 6.562 Vertical direction Emitter Thru-beam type Parallel deviation 9.843 L Receiver 40 1.575 CX-412□ 1,000 39.370 Emitter ℓ 19.685 Slit on both sides Horizontal direction Horizontal 6.562 direction Emitter Receiver Receiver 0 100 50 50 100 3.937 1.969 1.969 3.937 (Down) Left Right (Up) Center Operating point ℓ (mm in) 50 50 100 3.937 1.969 1.969 Center Left Right Operating point ℓ (mm in) 400 15.748 26.247 Slit on one side Slit on one side Vertical Horizontal direction direction ℓ Slit on one side Receiver Parallel deviation with rectangular slit masks (1 × mm 0.039 × 0.236 in) 3.281 800 31.496 10 10 20 0.787 0.394 0.394 Center Left Right Operating point ℓ (mm in) 9.843 Slit on one side Horizontal direction L ℓ 13.123 Slit on one side Vertical direction Emitter Slit on both sides 20 0.787 40 Parallel deviation with rectangular slit masks (0.5 × mm 0.020 × 0.236 in) Setting distance L (m ft) Setting distance L (m ft) Slit on both sides 20 20 Center Left Right Operating angle θ ( ° ) Slit on one side 200 7.874 Receiver 40 Slit on one side 3.281 θ L 16.404 Receiver 6.562 100 3.937 Emitter 200 200 400 7.874 7.874 15.748 Center Left Right Operating point ℓ (mm in) Parallel deviation with round slit masks (ø2 mm ø0.079 in) Setting distance L (mm in) L ℓ Setting distance L (m ft) Setting distance L (m ft) Emitter 16.404 400 15.748 Parallel deviation with round slit masks (ø1 mm ø0.039 in) Setting distance L (m ft) 10 32.808 10 32.808 400 15.748 Parallel deviation with round slit masks (ø0.5 mm ø0.020 in) Angular deviation Setting distance L (m ft) Parallel deviation Slit on both sides Horizontal and Vertical direction Horizontal 13.123 direction Emitter 6.562 ℓ L Vertical direction Emitter ℓ L Receiver Receiver 800 400 400 800 31.496 15.748 15.748 31.496 (Down) Left Right (Up) Center Operating point ℓ (mm in) Compact Photoelectric Sensor 17 CX-400 SERIES Ver.2 SENSING CHARACTERISTICS (TYPICAL) CX-491□ Retroreflective type CX-493□ Retroreflective type Angular deviation Parallel deviation Angular deviation 13.123 13.123 26.247 26.247 19.685 19.685 6.562 L 3.281 3.281 200 7.874 Sensor angular deviation Reflector (RF-230) θ L 6.562 Sensor Sensor 40 100 100 200 3.937 3.937 7.874 Center Left Right Operating point ℓ (mm in) CX-481□ Sensor 20 20 Center Left Right Operating angle θ ( ° ) Setting distance L (mm in) Setting distance L (mm in) 600 23.622 Reflector (RF-230) 400 15.748 ℓ Sensor 400 15.748 L Sensor 200 7.874 Reflector angular Reflector deviation angular Reflector (RF-230) deviation 200 7.874 40 50 50 100 1.969 1.969 3.937 Center Left Right Operating point ℓ (mm in) Sensor angular deviation θ L Sensor 20 20 Center Left Right Operating angle θ ( ° ) 40 Sensor Retroreflective type Angular deviation 6.562 6.562 Reflector (RF-230) 3.281 200 7.874 20 0.787 ℓ L Sensor 100 100 200 3.937 3.937 7.874 Center Left Right Operating point ℓ (mm in) 200 × 200 mm 7.874 × 7.874 in White non-glossy paper L Sensor 100 3.937 a × a mm White non-glossy paper 50 1.969 40 50 100 150 1.969 3.937 5.906 White non-glossy paper side length a (mm in) 200 7.874 Diffuse reflective type Correlation between sensing object size and sensing range 200 × 200 mm 7.874 × 7.874 in White nonglossy paper ℓ L Sensor 100 3.937 40 1.575 20 20 Center Left Right Operating angle θ ( ° ) Sensor As the sensing object size becomes smaller than the standard size (white non-glossy paper 200 × 200 mm 7.874 × 7.874 in), the sensing range shortens, as shown in the left graph For plotting the left graph, the sensitivity has been set such that a 200 × 200 mm 7.874 × 7.874 in white non-glossy paper is just detectable at a distance of 300 mm 11.811 in 400 15.748 Sensing range L (mm in) Setting distance L (mm in) 200 7.874 40 Reflector angular deviation Reflector angular deviation Reflector θ L (RF-230) Sensor L 10 10 20 0.394 0.394 0.787 Center Left Right Operating point ℓ (mm in) Sensing field 300 11.811 3.281 Sensor angular deviation Sensor angular deviation θ L Reflector (RF-230) Sensor As the sensing object size becomes smaller than the standard size (white non-glossy paper 200 × 200 mm 7.874 × 7.874 in), the sensing range shortens, as shown in the left graph For plotting the left graph, the sensitivity has been set such that a 200 × 200 mm 7.874 × 7.874 in white non-glossy paper is just detectable at a distance of 100 mm 3.937 in CX-421□ 400 15.748 Sensor Sensor 20 20 40 Center Left Right Operating angle θ( ° ) Correlation between sensing object size and sensing range Sensing range L (mm in) Setting distance L (mm in) 50 1.969 40 Sensor Sensor angular deviation Reflector (RF-230) θ L Reflector angular deviation Sensor angular deviation Reflector angular deviation Reflector (RF-230) θ L Diffuse reflective type Sensing field ℓ 6.562 CX-482□ CX-424□ 100 3.937 13.123 100 100 200 3.937 3.937 7.874 Center Left Right Operating point ℓ (mm in) Parallel deviation Sensor angular deviation Reflector (RF-230) θ L 800 31.496 600 23.622 200 7.874 40 Angular deviation 800 31.496 Reflector (RF-230) ℓ L 6.562 L Retroreflective type Parallel deviation 100 3.937 θ 13.123 Setting distance L (m ft) ℓ Sensor angular deviation Reflector angular deviation Reflector (RF-230) Setting distance L (m ft) Reflector (RF-230) Setting distance L (m ft) 9.843 Setting distance L (m ft) Setting distance L (m ft) 9.843 Reflector angular deviation Setting distance L (m ft) Parallel deviation 300 11.811 200 7.874 a × a mm White nonglossy paper 100 3.937 L Sensor 20 20 40 0.787 0.787 1.575 Center Left Right Operating point ℓ (mm in) 50 100 150 1.969 3.937 5.906 White non-glossy paper side length a (mm in) 200 7.874 18 Compact Photoelectric Sensor CX-400 SERIES Ver.2 SENSING CHARACTERISTICS (TYPICAL) CX-422□ Diffuse reflective type Correlation between sensing object size and sensing range Setting distance L (mm in) 1,000 39.370 200 × 200 mm 7.874 × 7.874 in White nonglossy paper ℓ 500 19.685 L Sensor 40 1.575 As the sensing object size becomes smaller than the standard size (white non-glossy paper 200 × 200 mm 7.874 × 7.874 in), the sensing range shortens, as shown in the left graph For plotting the left graph, the sensitivity has been set such that a 200 × 200 mm 7.874 × 7.874 in white non-glossy paper is just detectable at a distance of 800 mm 31.496 in 800 31.496 Sensing range L (mm in) Sensing field a × a mm White nonglossy paper 400 15.748 Sensor 20 20 40 0.787 0.787 1.575 Center Left Right Operating point ℓ (mm in) L 50 100 150 1.969 3.937 5.906 White non-glossy paper side length a (mm in) 200 7.874 CX-423□ Diffuse reflective type Sensing field Correlation between sensing object size and sensing range 200 7.874 N6 100 200 × 200 mm 3.937 7.874 × 7.874 in Non-glossy paper 100 3.937 ℓ L Sensor a × a mm Non-glossy paper L Sensor 1 0.039 0.039 0.079 Center Left Right Operating point ℓ (mm in) 50 100 150 1.969 3.937 5.906 Non-glossy paper side length a (mm in) 200 7.874 Correlation between lightness and sensing range Sensing range L (mm in) 200 7.874 Sensing region 100 3.937 Dark N2 N4 N6 Lightness N8 The sensing region is represented by oblique lines in the left figure However, the sensitivity should be set with an enough margin because of slight variation in products Emitted beam 250 9.843 200 7.874 150 5.906 110 4.331 100 3.937 ø2.5 mm ø0.098 in ø2 mm ø0.079 in ø2.2 mm ø0.087 in 50 1.969 ø4 mm ø0.157 in Light N1 N2 N3 N4 N5 N6 N7 N8 N9 Lightness shown on the left may differ slightly from the actual object condition ø5 mm ø0.197 in Visible spot range 0.079 For plotting the left graph, the sensitivity has been set such that a 200 × 200 mm 7.874 × 7.874 in white non-glossy paper is just detectable at a distance of 200 mm 7.874 in Contact us for the sensing characteristics of 300 mm 11.811 in distance Please contact us for the sensing field at the setting distance 300 mm 11.811 in N6 Distance L (mm in) Sensing range L (mm in) Setting distance L (mm in) As the sensing object size becomes smaller than the standard size (white non-glossy paper 200 × 200 mm 7.874 × 7.874 in), the sensing range shortens, as shown in the left graph White White 200 7.874 Compact Photoelectric Sensor CX-400 SERIES Ver.2 SENSING CHARACTERISTICS (TYPICAL) CX-441□ Adjustable range reflective type Sensing fields Emitted beam • Setting distance: 50 mm 1.969 in 40 1.575 80 3.150 Sensor 0.157 2 0.079 0.079 0.157 Center Left Right Operating point ℓ (mm in) L ℓ Sensor Sensing range L (mm in) 50 1.969 mm …50 1.969 in 25 0.984 Black Blue Gray Green Red Brown Orange White Yellow mm …25 0.984 in These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 50 mm 1.969 in and 25 mm 0.984 in long, respectively, with white color The sensing range also varies depending on material ø3 mm 0.118 in ø3 mm 0.118 in 2 0.079 0.079 0.157 Center Left Right Operating point ℓ (mm in) Correlation between color (50 × 50 mm 1.969 × 1.969 in construction paper) and sensing range ø2 mm 0.079 in Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range 50 1.969 mm …50 1.969 in 25 0.984 mm …25 0.984 in Black rubber 0.157 20 0.787 ø2 mm 0.079 in Plywood ℓ L 50 × 50 mm 1.969 × 1.969 in Non-glossy paper Cardboard 10 0.394 40 1.575 60 2.362 50 1.969 40 1.575 30 1.181 20 0.787 Gray non-glossy paper (Lightness: 5) 50 × 50 mm 1.969 × 1.969 in Non-glossy paper Gray non-glossy paper Lightness: White nonglossy paper 20 0.787 60 2.362 Distance L (mm in) Gray non-glossy paper Lightness: 30 1.181 80 3.150 White nonglossy paper Sensing range L (mm in) Setting distance L (mm in) White nonglossy paper Setting distance L (mm in) • Setting distance: 25 mm 0.984 in CX-443□ Adjustable range reflective type Sensing fields Emitted beam 10 0.394 0.157 20 0.787 2 0.079 0.079 0.157 Center Left Right Operating point ℓ (mm in) 0.157 White nonglossy paper Gray non-glossy paper Lightness: Sensing range L (mm in) mm …50 1.969 in 25 0.984 Black Gray Blue Green Brown Red Orange White Yellow mm …25 0.984 in These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 50 mm 1.969 in and 25 mm 0.984 in long, respectively, with white color The sensing range also varies depending on material ø6.5 mm 0.256 in ø6.2 mm 0.244 in ø5.9 mm 0.232 in ø5.3 mm 0.209 in 2 0.079 0.079 0.157 Center Left Right Operating point ℓ (mm in) Correlation between color (50 × 50 mm 1.969 × 1.969 in construction paper) and sensing range 50 1.969 60 2.362 50 1.969 40 1.575 30 1.181 20 0.787 Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range 50 1.969 mm …50 1.969 in 25 0.984 mm …25 0.984 in Black rubber Gray non-glossy paper Lightness: Sensor Plywood 40 1.575 White nonglossy paper ℓ Cardboard 20 0.787 L Gray non-glossy paper (Lightness: 5) 60 2.362 White nonglossy paper ℓ Sensor 80 3.150 50 × 50 mm 1.969 × 1.969 in Non-glossy paper Distance L (mm in) L 30 1.181 80 3.150 Setting distance L (mm in) Setting distance L (mm in) 50 × 50 mm 1.969 ì 1.969 in Non-glossy paper ã Setting distance: 50 mm 1.969 in Sensing range L (mm in) • Setting distance: 25 mm 0.984 in 40 1.575 These bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of 50 mm 1.969 in and 25 mm 0.984 in long, respectively, with white non-glossy paper These bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of 50 mm 1.969 in and 25 mm 0.984 in long, respectively, with white non-glossy paper 19 20 Compact Photoelectric Sensor CX-400 SERIES Ver.2 SENSING CHARACTERISTICS (TYPICAL) CX-444□ Adjustable range reflective type Sensing fields Emitted beam Sensor 10 0.394 5 10 0.394 0.197 0.197 Center Left Right Operating point ℓ (mm in) mm …100 3.937 in Black Blue Gray Green Red Brown Sensor 10 0.394 5 10 0.197 0.197 0.394 Center Left Right Operating point ℓ (mm in) These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 100 mm 3.937 in and 50 mm 1.969 in long, respectively, with white color The sensing range also varies depending on material ø6.5 mm ø0.256 in 20 0.787 ø5.3 mm ø0.209 in Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range 100 3.937 mm …100 3.937 in 50 1.969 mm …50 1.969 in These bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of 100 mm 3.937 in and 50 mm 1.969 in long, respectively, with white non-glossy paper Adjustable range reflective type Sensing fields Emitted beam • Setting distance: 200 mm 7.874 in White nonglossy paper Setting distance L (mm in) Gray non-glossy paper Lightness: 50 × 50 mm 1.969 × 1.969 in Non-glossy paper 50 1.969 ℓ L Sensor 5 10 0.197 0.197 0.394 Center Left Right Operating point ℓ (mm in) Setting distance L (mm in) 200 7.874 100 3.937 100 3.937 400 15.748 White nonglossy paper Gray non-glossy paper Lightness: 50 × 50 mm 1.969 × 1.969 in Non-glossy paper L # ℓ Sensor 10 0.394 • Setting distance: 300 mm 11.811 in Correlation between color (50 × 50 mm 1.969 × 1.969 in construction paper) and sensing range White nonglossy paper 300 11.811 200 7.874 50 × 50 mm 1.969 × 1.969 in Non-glossy paper 100 3.937 L 10 0.394 5 10 0.197 0.197 0.394 Center Left Right Operating point ℓ (mm in) 400 15.748 Gray non-glossy paper Lightness: Setting distance L (mm in) • Setting distance: 100 mm 3.937 in # ℓ Sensor 5 10 0.197 0.197 0.394 Center Left Right Operating point ℓ (mm in) 300 11.811 □15 mm □0.591 in 200 7.874 □11 mm □0.433 in 100 3.937 1.181 30 □9 mm □0.354 in ø8 mm ø0.315 in Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range 300 mm …11.811 in 200 mm …7.874 in …100 mm 3.937 in Black rubber 100 3.937 Plywood Black Gray Blue Green Brown Red Orange White Yellow 100 3.937 200 7.874 Cardboard 300 mm …11.811 in 200 mm …7.874 in …100 mm 3.937 in 300 11.811 Gray non-glossy paper (Lightness: 5) 200 7.874 These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 300 mm 11.811 in, 200 mm 7.874 in and 100 mm 3.937 in long, respectively, with white color The sensing range also varies depending on material White nonglossy paper Sensing range L (mm in) 300 11.811 Sensing range L (mm in) 400 15.748 400 15.748 50 1.969 5 10 0.197 0.197 0.394 Center Left Right Operating point ℓ (mm in) CX-442□ 10 0.394 ø8 mm ø0.315 in Distance L (mm in) Orange White mm …50 1.969 in Yellow Sensing range L (mm in) 50 1.969 ℓ L Sensor Correlation between color (50 × 50 mm 1.969 × 1.969 in construction paper) and sensing range 100 3.937 50 1.969 ø9 mm ø0.354 in 80 3.150 Distance L (mm in) ℓ L 50 × 50 mm 1.969 × 1.969 in Non-glossy paper 100 3.937 Black rubber 20 0.787 Gray non-glossy paper Lightness: Plywood 10 0.394 ℓ 50 × 50 mm 1.969 × 1.969 in Non-glossy paper Cardboard L Gray non-glossy paper Lightness: White nonglossy paper 10 0.394 40 1.575 100 3.937 Setting distance L (mm in) 60 2.362 50 × 50 mm 1.969 × 1.969 in Non-glossy paper White nonglossy paper White nonglossy paper Sensing range L (mm in) Gray non-glossy paper Lightness: Setting distance L (mm in) Setting distance L (mm in) White nonglossy paper 30 1.181 • Setting distance: 100 mm 3.937 in 80 3.150 40 1.575 20 0.787 • Setting distance: 50 mm 1.969 in Gray non-glossy paper (Lightness: 5) • Setting distance: 25 mm 0.984 in These bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of 300 mm 11.811 in, 200 mm 7.874 in and 100 mm 3.937 in long, respectively, with white non-glossy paper ... CX- 411 CX- 4 12 CX- 413 CX- 491 CX- 493 CX- 481 CX- 483 CX- 4 82 CX- 424 CX- 421 CX- 422 CX- 423 PNP output CX- 411-P CX- 4 12- P CX- 413-P CX- 491-P CX- 493-P CX- 481-P CX- 483-P CX- 4 82- P CX- 424 -P CX- 421 -P CX- 422 -P... 6.5 62 ft (Note 2) CX- 4 82 CX- 4 82- P CX- 424 CX- 424 -P CX- 421 CX- 421 -P CX- 422 CX- 422 -P CX- 423 CX- 423 -P CX- 441 CX- 441-P CX- 443 CX- 443-P CX- 444 CX- 444-P CX- 4 42 CX- 4 42- P 30 m 98. 425 ft Long sensing With polarizing... SERIES Ver. 2 OPTIONS Model No Designation Slit mask Sensor CX- 411□ OS -CX- 05 CX- 413□ Round slit mask () For thrubeam type sensor only CX- 4 12? ?? CX- 411□ OS -CX- 1 CX- 4 12? ?? CX- 413□ CX- 411□ OS -CX- 2 CX- 4 12? ??