STEM 205 – Quick Start Guide Room 205 - UW STEM Start page If screen is black, touch anywhere to wake the screen This page will appear when you wake the screen: PRESS IN THE CENTER OF THE LOGO TO GO TO THE NEXT SCREEN Room Setup The Room Setup screen allows you to choose who will be able to lead the presentation Choose either Teacher Lead, Student Lead or Group Collaboration After you choose who will lead the presentation, you will arrive at the source display screen The sources will be different Teacher Lead, Student Lead and Group Collaboration Teacher Lead Presentation: Room Setup button will bring you back to this screen In this mode only the teacher’s sources will present from all projectors NO STUDENT INPUTS WILL BE ACTIVATED NOR DISPLAYED Group Collaboration: In this mode, students choose a source from their group to be displayed on the display at their table Student Lead Presentation: Simultaneously, the teacher can choose a source to display from the room projectors In this mode, sources selected will be displayed on all room projectors displays at the student tables UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide Selecting a source From here you can select a source to turn the AV System on Different source options for presentation leads: TEACHER LEAD STUDENT LEAD GROUP COLLABORATION Although the source options are different, the selection process remains the same: Source Options Select Laptop, Lectern PC, Doc Cam Overhead, Student Table 1, Student Table 2,3,4…etc (Some rooms have up to 11 tables) to display for your presentation When you select a source, you will be prompted with an instruction/status screen: Laptop – Make sure to have an HDMI or VGA plugged in to your laptop Select Laptop button and plug into your laptop’s HDMI or VGA output Choose either HDMI or VGA – not both – plug your choice into the laptop Plug the USB cable into your laptop for use of the interactive function of the projector You must have the interactive projector software loaded on your laptop UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide To use the HDMI output from your laptop, plug in the HDMI cable This screen will appear when HDMI is active Your laptop may require you to route the audio to the HDMI output of your laptop in order to hear the audio over the room speakers To use the VGA output from your laptop, plug in the VGA cable This screen will appear when VGA is active Plug in the 3.5mm audio plug to your laptop to use audio over the room speakers To use the built-in PC select the Lectern PC button Select Lectern PC button To use the Desktop Document Camera: Select Desk Doc Cam button UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide Student Table Input/Display Options Students can choose which laptop input they want to present on their table’s display GREEN LIGHT INDICATES LAPTOP IS CONNECTED DEVICE 1-4: choose which laptop to present on your table’s display GREY BACKGROUND INDICATES WHICH LAPTOP IS DISPLAYING POWER DISPLAY OFF: will shut down display so no laptop input will be visible UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide Touch Panel Basics These buttons will appear on every page and will perform the same functions from any screen: HELP: provides answers to potential questions and contact information through prelisted directory POWER ON/OFF: powers system on or off OPTIONS: allows you to reroute audio and blank projectors HOME: brings you back to the source selection screen LIGHTING / SHADE CONTROL: dimming control, power and up and down for lights or room shades where available ROOM SETUP: brings you back to the Room Setup screen where you can choose who will lead the presentation VOLUME CONTROL: raise, lower or mute microphone input volume or source output volume Slider controls will appear when you press either VOLUME CONTROL arrow Use the slider to raise or lower volume of the microphone input or the source output Press the mute button to mute the microphone or the source UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide OPTIONS – This screen allows you to blank your projectors so no image will display You can also choose which audio source will play out of the speakers BLANK PROJECTOR: turns screen blank so no image will display AUDIO RE-ROUTE: select source output for audio to play through speakers HELP – This screen provides a Request Immediate Assistance button and displays a number to call for help This screen will appear when you press HELP Click on REQUEST IMMEDIATE ATTENTION or call the phone number provided This screen will display after pressing REQUEST IMMEDIATE ASSISTANCE Select the problem you are having This screen will appear after you select your issue from the previous list This confirms your request was submitted LIGHTING/SHADE CONTROL – This screen provides controls for lighting and the shades in the room ALL ON: turns all of the room lights on ALL UP: raise shades Downlights, Wall Wash select specific lights and Button and are for rooms with more lights or future additions ALL STOP: stops the shades from raising or lowering to your desired position ALL OFF: turns all of the room lights off ALL DOWN: lower shades UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide SYSTEM OFF – This screen provides the option to shut the system down UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 STEM 205 – Quick Start Guide UWYO Classroom Technology Support www.uwyo.edu/cts (307) 766-2872 ... 76 6-2 872 STEM 205 – Quick Start Guide SYSTEM OFF – This screen provides the option to shut the system down UWYO Classroom Technology Support www.uwyo.edu/cts (307) 76 6-2 872 STEM 205 – Quick Start. .. Classroom Technology Support www.uwyo.edu/cts (307) 76 6-2 872 STEM 205 – Quick Start Guide Touch Panel Basics These buttons will appear on every page and will perform the same functions from any screen:.. .STEM 205 – Quick Start Guide Selecting a source From here you can select a source to turn the AV System on Different source options for presentation