Thiết kế cơ khí với Catia
Part Design Version Release 12 © Dassault Systèmes 1994-2003 All rights reserved Preface Using This Guide Where to Find More Information Conventions What's New? Getting Started Entering the Part Design Workbench Creating a Pad Drafting a Face Filleting an Edge Editing the Pad Mirroring the Part Sketching a Circle from a Face Creating a Pocket Shelling the Part Basic Tasks Opening a New CATPart Document Sketch-Based Features Pad Sub-Elements of a Sketch Up to Next Pads Up to Last Pad Up to Plane Pad Up to Surface Pad Pad from Surface Not Normal to Sketch Pad Multi- Pad Drafted Filleted Pad Pocket Multi-Length Pocket Drafted Filleted Pocket Thin Solids Shaft Groove http://pop.dia.uniroma3.it/catia/online/CATIAfr_C2/prtugCATIAfrs.htm (1 of 5)10/18/2004 7:42:43 PM Part Design Part Design Hole Locating Holes Threaded Hole Rib More About Ribs Slot Stiffener Multi-sections Solid Removed Multi-sections Solid Solid Combine Dress-Up Features Edge Fillet Variable Radius Fillet Reshaping Corners Face-Face Fillet Tritangent Fillet Chamfer Basic Draft Advanced Draft Variable Angle Draft Draft with Parting Element Draft from Reflect Lines Shell Thickness Thread Remove Faces Replace Face Surface-Based Features Split Thick Surface Close Surface Sew Surface Transformation Features Translation Rotation Symmetry Mirror Rectangular Pattern Circular Pattern User Pattern Exploding Patterns Scaling Reference Elements Creating Points http://pop.dia.uniroma3.it/catia/online/CATIAfr_C2/prtugCATIAfrs.htm (2 of 5)10/18/2004 7:42:43 PM Part Design Creating Lines Creating Planes Using Surfaces and Curves Joining Surfaces or Curves Extrapolating Surfaces Extracting Geometry Creating Intersections Creating Projections Creating Boundary Curves Modifying Features Editing parts, bodies, features Reordering Features Updating Parts Deleting Features Constraints Setting 3D Constraints Setting constraints Modifying Constraints Mean Dimensions Replacing Elements Replacing a Surface Replacing a Body Moving Sketches Changing a Sketch Support Displaying and Editing Properties Part Properties Bodies Properties Features Properties Annotations Creating a Text With Leader Flag Notes Handling Parts in a Multi-Document Environment Advanced Tasks Associating Bodies Inserting a Body Inserting in a Body Assembling Bodies Intersecting Bodies Adding Bodies Removing Bodies Trimming Bodies Remove Lump Changing a Boolean Operation Into Another One http://pop.dia.uniroma3.it/catia/online/CATIAfr_C2/prtugCATIAfrs.htm (3 of 5)10/18/2004 7:42:43 PM Part Design Tools Editing a list of Elements Scanning the Part and Defining In Work Objects Performing a Draft Analysis Performing a Surfacic Curvature Analysis Tap-Thread Analysis Creating Datums Applying a Material Extracting Geometry Parents and Children Axis System Publishing Elements PowerCopy Creating PowerCopies Instantiating PowerCopies Saving PowerCopies into a Catalog Reusing your Design Cutting, Copying, Pasting Workbench Description Part Design Menu Bar Sketch-Based Features Toolbar Dress-Up Features Toolbar Surface-Based Features Toolbar Transformation Features Toolbar Reference Elements Toolbar Boolean Operations Toolbar Sketcher Toolbar Constraints Toolbar Analysis Toolbar Annotations Toolbar Tools Toolbar Insert Toolbar Miscellaneous Symbols Symbols Reflecting an Incident in the Geometry Building Specification Tree Customizing Tree and Geometry View General Settings Constraint Appearance CATPart Document Tolerancing Display http://pop.dia.uniroma3.it/catia/online/CATIAfr_C2/prtugCATIAfrs.htm (4 of 5)10/18/2004 7:42:43 PM Part Design Manipulators View/Annotation Plane Glossary Index Preface The Version Part Design application makes it possible to design precise 3D mechanical parts with an intuitive and flexible user interface, from sketching in an assembly context to iterative detailed design Version Part Design application will enable you to accommodate design requirements for parts of various complexities, from simple to advanced This application, which combines the power of feature-based design with the flexibility of a Boolean approach, offers a highly productive and intuitive design environment with multiple design methodologies, such as post-design and local 3D parameterization As a scalable product, Part Design can be used in cooperation with other current or future companion products such as Assembly Design and Generative Drafting The widest application portfolio in the industry is also accessible through interoperability with CATIA Solutions Version to enable support of the full product development process from initial concept to product in operation The Part Design User's Guide has been designed to show you how to create a part There are several ways of creating a part and this book aims at illustrating the several stages of creation you may encounter Using This Guide Where to Find More Information Conventions http://pop.dia.uniroma3.it/catia/online/CATIAfr_C2/prtugCATIAfrs.htm (5 of 5)10/18/2004 7:42:43 PM Preface Preface The Version Part Design application makes it possible to design precise 3D mechanical parts with an intuitive and flexible user interface, from sketching in an assembly context to iterative detailed design Version Part Design application will enable you to accommodate design requirements for parts of various complexities, from simple to advanced This application, which combines the power of feature-based design with the flexibility of a Boolean approach, offers a highly productive and intuitive design environment with multiple design methodologies, such as post-design and local 3D parameterization As a scalable product, Part Design can be used in cooperation with other current or future companion products such as Assembly Design and Generative Drafting The widest application portfolio in the industry is also accessible through interoperability with CATIA Solutions Version to enable support of the full product development process from initial concept to product in operation The Part Design User's Guide has been designed to show you how to create a part There are several ways of creating a part and this book aims at illustrating the several stages of creation you may encounter Using This Guide Where to Find More Information Conventions http://pop.dia.uniroma3.it/catia/online/prtug_C2/prtugpr01.htm10/18/2004 7:42:56 PM Using This Guide Using This Guide This book is intended for the user who needs to become quickly familiar with Part Design product The user should be familiar with basic Version concepts such as document windows, standard and view toolbars To get the most out of this guide, we suggest you start reading and performing the step-bystep tutorial Getting Started This tutorial will show you how to create a basic part from scratch Once you have finished, you should move on to the next sections dealing with the handling of CATPart data, then the creation and modification of various types of features you will need to construct parts This guide also presents other Part Design capabilities allowing you to design complex parts You can also take a look at the sections describing the Part Design Workbench at the end of the guide To perform the scenarios, you will use sample documents contained in the C:\Program Files\Dassault Systèmes\B12doc\online\prtug\samples folder When samples belong to capabilities common to different products, those samples will be found in the C:\Program Files\Dassault Systèmes\B12doc\online\cfyug\samples folder [ Up ] [ Next ] http://pop.dia.uniroma3.it/catia/online/prtug_C2/prtugpr02.htm10/18/2004 7:43:04 PM Where to Find More Information Where to Find More Information Prior to reading this book, we recommend that you read the Infrastructure User's Guide and the Dynamic Sketcher User's Guide Other complementary product guides such as the Assembly Design User's Guide, the Wireframe and Surface User's Guide, the Generative Drafting User's Guide and the Product Knowledge Template User's Guide can prove useful too Click to find out more about the Conventions used in this guide [ Back ] [ Up ] [ Next ] http://pop.dia.uniroma3.it/catia/online/prtug_C2/prtugpr03.htm10/18/2004 7:43:14 PM Conventions Conventions Certain conventions are used in CATIA, ENOVIA & DELMIA documentation to help you recognize and understand important concepts and specifications The following text conventions may be used: The titles of CATIA documents appear in this manner throughout the text File -> New identifies the commands to be used The use of the mouse differs according to the type of action you need to perform Use this mouse button, whenever you read Select (menus, commands, geometry in graphics area, ) Click (icons, dialog box buttons, tabs, selection of a location in the document window, ) Double-click Shift-click Ctrl-click Check (check boxes) Drag Drag and drop (icons onto objects, objects onto objects) Drag Move Right-click (to select contextual menu) Graphic conventions are denoted as follows: indicates the estimated time to accomplish a task indicates a target of a task indicates the prerequisites indicates the scenario of a task indicates tips indicates a warning indicates information http://pop.dia.uniroma3.it/catia/online/icons_C2/conventions.htm (1 of 3)10/18/2004 7:43:22 PM Conventions indicates basic concepts indicates methodological information indicates reference information indicates information regarding settings, customization, etc indicates the end of a task indicates functionalities that are new or enhanced with this Release Enhancements can also be identified by a blue-colored background in the lefthand margin or on the text itself indicates functionalities that are P1-specific indicates functionalities that are P2-specific indicates functionalities that are P3-specific allows you to switch back the full-window viewing mode These icons in the table of contents correspond to the entries or mode "Site Map" "Split View" mode "What's New" "Preface" "Getting Started" "Basic Tasks" "User Tasks" or the "Advanced Tasks" "Workbench Description" "Customizing" "Reference" http://pop.dia.uniroma3.it/catia/online/icons_C2/conventions.htm (2 of 3)10/18/2004 7:43:22 PM Index overall curve dimensions pre-defined value formats in standards radius curvature dimensions re-routing searching dimension status setting relations between dimensional constraints specifying value position stacked dimensions standard parameters styles technological feature dimensions tolerance formats in standards value formats in standards drawing management (administration settings) Drawing toolbar drawings creating migrating pre-R11 drawings to use styles dress-up settings standard parameters styles dress-up (administration settings) dress-up generation (view generation settings) Dress-Up toolbar driving dimensions, creating DWG Import DXF/DWG Choice of Standard Export Export unit Export VBScript Macros http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (14 of 28)10/19/2004 4:59:34 PM Index Extension Import Import of multiple viewports and layouts Import VBScript Macros Imported Elements Multi-sheet export Report File Trouble Shooting What about the elements you export DXF/DWG CATIA V4 Trouble Shooting DXF/DWG File Size Trouble Shooting DXF/DWG Kanji or unicode characters Trouble Shooting DXF/DWG Small Entities Best Practices DXF/DWG VBScript Macros utility E editing annotation leaders dimension value properties images elements trimming elements, closing ellipse, creating equidistant points, creating exact views explicit dimensions, creating exploding 2D components http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (15 of 28)10/19/2004 4:59:34 PM Index Export CGM DXF/DWG Export unit DXF/DWG Export VBScript Macros DXF/DWG exposing 2D components from a catalog Extension DXF/DWG extension cgm extension lines, interrupting F file, export and import finding text frames creating for text standard parameters frames and title blocks creating frames and title blocks, creating free text G general parameters standards general settings generation settings generative view style (administration settings) http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (16 of 28)10/19/2004 4:59:34 PM Index geometrical tolerances copying creating modifying geometry analyzing diagnosis geometry (geometry creation settings) geometry creation settings Geometry Creation toolbar geometry generation (view generation settings) Geometry Modification toolbar geometry styles geometry welds, creating graphic properties copying editing Graphic Properties toolbar grid H half dimension, creating handling annotation leaders hexagon holes dimensions table, creating hyperbola by focus, creating I images editing inserting http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (17 of 28)10/19/2004 4:59:34 PM Index overview Import DWG DXF/DWG Import of multiple viewports and layouts DXF/DWG Import VBScript Macros DXF/DWG Imported Elements DXF/DWG importing tables infinite line, creating insert CMG inserting images views in tables interrupting extension lines intersecting 3D elements intersections, isolating isolating intersections projections K Knowledgeware activating/deactivating annotations activating/deactivating table rows L leaders adding to annotations http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (18 of 28)10/19/2004 4:59:34 PM Index handling positioning breakpoints line thickness, standard parameters lines normal to curves, creating lines, creating linetypes, standard parameters line-up (dimension settings) lining up dimensions free space reference M managing standards manipulators (manipulators settings) manipulators settings menu bar migrating pre-R11 to drawings using standard-defined styles mirrored element, creating modifying annotation positioning balloons center lines coordinate dimensions datum features datum targets dimension line location dimension text before/after dimension type dimensions overrun and blanking geometrical tolerances sheets http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (19 of 28)10/19/2004 4:59:34 PM Index tables move (annotation and dress-up settings) move (dimension settings) multiple view projection creating multiple view projection, creating Multi-sheet export DXF/DWG N new sheet (view and sheet layout settings) O objects, querying links occlusion culling offsetting operations on profiles, performing orientation of text output features, creating overall curve dimensions, creating overrun in dimensions, modifying P parabola by focus, creating patterns editing properties standard parameters point using intersection, creating points coordinates table http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (20 of 28)10/19/2004 4:59:34 PM Index points using coordinates, creating points, creating positioning dimension value text leader breakpoints printing after modifying current display settings overview quickly using clipping operator profile creating projections, isolating properties 2D component instance properties 2D element graphic properties 2D geometry feature properties annotation font properties dimension extension line properties dimension line properties dimension text properties dimension tolerance properties dimension value properties pattern properties text properties properties set as default, using Q querying object links quick constraints quickly analyzing, geometry http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (21 of 28)10/19/2004 4:59:34 PM Index R radius curvature dimensions, creating raster images, inserting raster views rectangle, creating reframing views Relimitations toolbar replacing text Report File DXF/DWG re-routing dimensions re-using 2D components 2D components from a catalog roughness symbols, creating rows, activating/deactivating in tables ruler (general settings) S search (advanced) section/projection callout (view and sheet layout settings) setting default properties settings administration annotation and dress-up dimension creation general generation geometry creation manipulators http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (22 of 28)10/19/2004 4:59:34 PM Index view and sheet layout view generation sheet layout settings sheet styles sheets defining deleting modifying simple profiles, sketching sketch analyzing sketching, simple profiles smartpick smartpick, using smartpicking specifying dimension value position spline creating spline offset creating splitting tables stacked dimensions, creating standard element standards annotation parameters annotation styles concepts customizing parameters defining formats dimension parameters dimension styles dimension tolerance formats dimension value formats http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (23 of 28)10/19/2004 4:59:34 PM Index dimension value formats (pre-defined ) dress-up parameters dress-up styles frame parameters general parameters geometry styles line thickness parameters linetypes parameters overview pattern parameters pre-defined styles sheet styles structure switching standards syntax for standard editor values tolerance formats (pre-defined ) updating in drawings upgrading view callout styles view generation STEP Quality of Conversion Best Practices storing text templates in a catalog style (administration settings) Style toolbar styles annotations creating deleting dimension dress-up geometry migrating pre-R11 drawings to use styles http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (24 of 28)10/19/2004 4:59:34 PM Index overview sheet using view callout switching drawing standards symmetrical elements applying constraints moving symmetrical extension, creating T tables activating/deactivating rows creating creating points coordinates table importing inserting views in modifying splitting technological feature dimensions text adding attribute links to associated text creating frames creating free text creating text with a leader editing properties finding and replacing making an existing text associative replicating text and attribute specifying orientation text before/after dimension value, modifying http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (25 of 28)10/19/2004 4:59:34 PM Index Text Properties toolbar text templates annotating drawings with creating storing in a catalog threads creating with no reference creating with reference three point circle, creating three points arc using limits, creating three points arc, creating tolerances, pre-defined formats in standards toolbars Annotations Constraints customizing Dimension Properties Dimensioning Drawing Dress-Up Geometry Creation Geometry Modification Graphic Properties Relimitations Style Text Properties Tools Tools Palette Transformations Tools Palette toolbar Tools toolbar tools, using Transformations toolbar http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (26 of 28)10/19/2004 4:59:34 PM Index translating elements trimming elements trimming tri-tangent circle, creating Trouble Shooting DXF/DWG DXF/DWG CATIA V4 DXF/DWG File Size DXF/DWG Kanji or unicode characters U updating standards upgrading standards using properties set as default styles using smartpick utility CATAnnDefaultStyleMigration CATAnnStandardTools DXF/DWG VBScript Macros V vector images, inserting view axis (general settings) view callout styles view creation (view and sheet layout settings) view generation settings standards http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (27 of 28)10/19/2004 4:59:34 PM Index view generation (view generation settings) view layout settings view plane defining views creating creating using folding lines defining view plane generating Approximate views generating CGR views generating exact views generating raster views inserting in tables reframing Visual clipping Visualization mode improving performance saving memory W welding symbols, creating welds, creating What about the elements you export DXF/DWG Y yellow, colors http://pop.dia.uniroma3.it/catia/online/driug_C2/driugix.htm (28 of 28)10/19/2004 4:59:34 PM ... http://pop.dia.uniroma3.it /catia/ online/CATIAfr_C2/prtugCATIAfrs.htm (5 of 5 )10 /18 /2004 7:42:43 PM Preface Preface The Version Part Design application makes it possible to design precise 3D mechanical parts with... http://pop.dia.uniroma3.it /catia/ online/prtug_C2/prtuggs 01. htm10 /18 /2004 7:43:56 PM Entering the Part Design Workbench Entering the Part Design Workbench This first task shows you how to enter the Part Design workbench... click OK The Part Design workbench is loaded and a CATPart document opens http://pop.dia.uniroma3.it /catia/ online/prtug_C2/prtugbt 010 0.htm (1 of 2 )10 /18 /2004 7:46:07 PM Opening a New CATPart Document