GMAW welding of carbon steel
Bare Rods for GMAW Welding of Carbon Steel AWS A5.18: ER70S-6 Copper coated, low carbon steel wire specially formulated for optimum performance under CO2 and Argon/CO2 mixed gases. Suitable for welding mild and medium strength steels. Is ideal for positional welding of sheet steel and steel pipes/tubes where high silicon content promotes smooth even weld beads with excellent edge wetting and contour. AWS A5.28: ER80S-B2 Copper coated precision layer wound wire specifically designed for welding creep resistant steels containing 1.0-1.25Cr and 0.4-0.6Mo and operating at service temperatures up to 500C. Also used for welding heat treatable steels of similar composition commonly found in petro-chemical and power generating industries . Bare Rods for GMAW Welding of Carbon Steel AWS A5.18: ER70S-6 Copper coated, low carbon steel wire specially formulated for optimum performance. Argon/CO2 mixed gases. Suitable for welding mild and medium strength steels. Is ideal for positional welding of sheet steel and steel pipes/tubes where high